HomeMy WebLinkAbout029 E101 Site PlanM
E5
E5
E5
E2
E1
E1
E5
E11
E11
E5
E5
E5
E12
E14
E14
E15
E15
E14
E2
E2
1
2
E10
E10
E14
(R) HHA
(R) HLC
34
5
6
7
8
IRRIGATION
WELL PUMP
HLC-31,33
HHA-13
HHA-13
HHA-13
HHA-13
HHA-13
HHA-13
HHA-13
HHA-13 HHA-13
HHA-13
HHA-13
HHA-13
HHA-13
HHA-13
HHA-13
HHA-13
HHA-13
HHA-13
HHA-13
HHA-13HHA-13
9
9
9
10
11
11
11
HHA-13
HHA-13
PHASE I
12
12
GENERAL ELECTRICAL NOTES
A. IT IS ABSOLUTELY NECESSARY FOR ALL TRADES INVOLVED TO COORDINATE
WITH EACH OTHER AND VERIFY THAT THERE ARE NO CONFLICTS IN
LOCATION OF DUCTS, CONDUITS, DIFFUSERS, BOXES, AND OTHER ITEMS
THROUGHOUT THIS PROJECT BEFORE FINAL PLACEMENT OF MATERIALS.
B. ELECTRICAL CONTRACTOR IS RESPONSIBLE FOR ALL CUTTING OF FLOORS,
WALLS, CEILINGS, AND ROOFS TO PERFORM THE REQUIRED WORK
DEPICTED IN THESE DOCUMENTS. THE CONTRACTOR IS RESPONSIBLE FOR
ALL PATCHING OF HOLES TO THE SATISFACTION OF THE
ARCHITECT/ENGINEER.
C. LOW VOLTAGE CABLES (LIGHTING CONTROLS) ABOVE ACCESSIBLE
CEILINGS SHALL BE SUPPORTED USING J-HOOKS AT INTERVALS NOT TO
EXCEED 48" OC, UNO.
THESE DOCUMENTS, IN PART OR IN WHOLE, AND THEDESIGN THEY REPRESENT ARE THE SOLE PROPERTYOF COLLABORATIVE DESIGN ARCHITECTS. THESEDOCUMENTS ARE INTENDED FOR THE PROJECT ONTHE SITE INDICATED. ANY USE, REPRODUCTION,MODIFICATION OR ADAPTATION WITHOUT THEEXPRESS WRITTEN CONSENT OF COLLABORATIVEDESIGN ARCHITECTS IS STRICTLY PROHIBITED.2280 GRANT ROAD, SUITE C BILLINGS, MT 59102 406.248.3443PREPARED FOR:PROJECT NUMBER:PROJECT ARCHITECT:
GALLATIN CROSSING MASTER SITE PLAN SUBMITTAL
2825 WEST MAIN STREET, BOZEMAN MT 59718
GALLATIN MALL GROUP JEFF KANNING 2206.?C O L L A B O R A T I V ED E S I G N A R C HITE CTSISSUE DATES:2205-GALLATIN CROSSING MASTER SITE PLAN SUBMITTALCOPYRIGHT C 2022 www.cd-mt.com406.656.6000
315 N. 25th Street, Suite 102, Billings, MT 59101
www.m-m.net#IssueDate #RevID
-
-
-A SCTEIR C H T
5/26/2023 - ADD. #1
E101
ELECTRICAL SITE PLAN
- PHASE I
MMI Project #: 2581.040
5/20/2022 MASTER SITE PLAN SUBMITTAL
5/20/2022 MASTER SITE PLAN SUBMITTAL
1" = 30'-0"E101
1 ELECTRICAL SITE PLAN - PHASE I
1 APPROXIMATE LOCATION OF EXISTING PANELS HHA & HLC.
2 EXISTING SITE LIGHT TO REMAIN.
3 EXISTING SITE LIGHT TO BE DEMOLISHED.
4 DEMOLISH EXISTING CIRCUITS AND CONDUIT BETWEEN SITE LIGHTS AS
SHOWN.
5 DEMOLISH EXISTING CIRCUITS AND CONDUIT BETWEEN SITE LIGHT AND NEW
ELECTRIC HANDHOLE AS SHOWN.
6 PROVIDE NEW ELECTRIC HANDHOLE. COORDINATE LOCATION WITH
EXISTING CONDUIT RUN SERVING EXISTING SITE LIGHTING. SEE DETAIL 3 ON
E002.
7 PROVIDE NEW 2" CONDUIT BETWEEN EXISTING SITE LIGHT AND NEW
ELECTRIC HANDHOLE AS SHOWN. COORDINATE ROUTING WITH CIVIL
DRAWING. FIELD VERIFY EXISTING CONDUCTOR SIZE AND QUANTITY AND
MATCH ACCORDINGLY.
8 PORTION OF EXISTING CONDUIT FROM PANEL TO NEW ELECTRIC HANDHOLE
TO REMAIN. FIELD VERIFY EXACT LOCATION.
9 APPROXIMATE LOCATION OF EXISTING SITE LIGHT TO BE DEMOLISHED.
DEMOLISH EXISTING CONDUCTORS AND CONDUIT TO NEAREST UPSTREAM
JUNCTION BOX OR PANEL.
10 PROVIDE CIRCUIT CONSISTING OF 1-1/4"C, 2#8CU, #8NCU, #10GCU.
11 PROVIDE #10CU CONDUCTORS IN 1" CONDUIT FOR SITE LIGHTING CIRCUIT.
TYPICAL FOR EACH SITE LIGHTING CIRCUIT.
12 PROVIDE ELECTRIC HANDHOLE. SEE DETAIL 3 ON E002.
KEY NOTES:#
IS
SEFORP
LANO E N G INEERO NTM ANA
LICENS E D
JEFFREY L.
KRAFT
No. 12720 PE