HomeMy WebLinkAbout040_L3.0_IrrigationScheduleAndNotesSYMBOL MANUFACTURER/MODEL/DESCRIPTION QTY PSI
RAIN BIRD R-VAN14 1804-SAM-P45
TURF ROTARY, 8FT.-14FT. 45-270 DEGREES AND 360 DEGREES.
HAND ADJUSTABLE MULTI-STREAM ROTARY W/1800 TURF
SPRAY BODY ON 4IN. POP-UP, WITH CHECK VALVE AND 45 PSI
IN-STEM PRESSURE REGULATOR. 1/2IN. NPT FEMALE THREADED
INLET.
235 45
RAIN BIRD R-VAN18 1804-SAM-P45
TURF ROTARY, 13FT.-18FT. 45-270 DEGREES AND 360 DEGREES.
HAND ADJUSTABLE MULTI-STREAM ROTARY W/1800 TURF
SPRAY BODY ON 4IN. POP-UP, WITH CHECK VALVE AND 45 PSI
IN-STEM PRESSURE REGULATOR. 1/2IN. NPT FEMALE THREADED
INLET.
59 45
RAIN BIRD R-VAN24 1804-SAM-P45
TURF ROTARY, 17FT.-24FT. 45-270 DEGREES AND 360 DEGREES.
HAND ADJUSTABLE MULTI-STREAM ROTARY W/1800 TURF
SPRAY BODY ON 4IN. POP-UP, WITH CHECK VALVE AND 45 PSI
IN-STEM PRESSURE REGULATOR. 1/2IN. NPT FEMALE THREADED
INLET.
19 45
SYMBOL MANUFACTURER/MODEL/DESCRIPTION QTY PSI GPM RADIUS
RAIN BIRD 5004-PL-PC-SAM-R 3.0
TURF ROTOR, 4IN. POP-UP WITH PLASTIC RISER. ADJUSTABLE
TO FULL CIRCLE. STANDARD ANGLE NOZZLE, IN-STEM PRESSURE
REGULATOR, AND FLOW SHUT-OFF DEVICE. WITH
SEAL-A-MATIC CHECK VALVE.
28 50 3.33 40'
SYMBOL MANUFACTURER/MODEL/DESCRIPTION QTY PSI
RAIN BIRD XCZ-150-LCS
HIGH FLOW CONTROL ZONE KIT, FOR LARGE COMMERCIAL DRIP
ZONES. 1-1/2IN. PEB GLOBE VALVE WITH SINGLE 1-1/2IN.
PRESSURE REGULATING 40PSI QUICK-CHECK BASKET FILTER.
FLOW RANGE: 15-62 GPM.
14
AREA TO RECEIVE DRIP EMITTERS
RAIN BIRD XB-PC
SINGLE OUTLET, PRESSURE COMPENSATING DRIP EMITTERS.
FLOW RATES OF 0.5 GPH=BLUE, 1.0 GPH=BLACK, AND 2.0
GPH=RED. COMES WITH A SELF-PIERCING BARB INLET X BARB
OUTLET.
62,754 S.F.40
Emitter Notes:
10PC emitters (1 assigned to each 4" POT plant)122
10PC emitters (1 assigned to each 1 GAL plant)332
10PC emitters (1 assigned to each 1 GAL. plant)1,331
10PC emitters (1 assigned to each 2 GAL plant)1,684
AREA TO RECEIVE DRIPLINE
RAIN BIRD XFCV-09-12
XFCV ON-SURFACE LANDSCAPE DRIPLINE WITH A HEAVY-DUTY
3.5 PSI CHECK VALVE. 0.9 GPH EMITTERS AT 12" O.C. DRIPLINE
LATERALS SPACED AT 12" APART, WITH EMITTERS OFFSET FOR
TRIANGULAR PATTERN. GREAT FOR ELEVATION CHANGE.
SPECIFY XF INSERT FITTINGS.
1,691 L.F.40
AREA TO RECEIVE DRIPLINE
RAIN BIRD XFS-CV-09-12
XFS-CV SUB-SURFACE AND ON-SURFACE LANDSCAPE DRIPLINE
WITH A HEAVY-DUTY 4.3 PSI CHECK VALVE. 0.9 GPH EMITTERS
AT 12" O.C. DRIPLINE LATERALS SPACED AT 12" APART, WITH
EMITTERS OFFSET FOR TRIANGULAR PATTERN. SPECIFY XF
INSERT FITTINGS.
8,668 L.F.40
SYMBOL MANUFACTURER/MODEL/DESCRIPTION QTY
RAIN BIRD PEB
1IN., 1-1/2IN., 2IN. PLASTIC INDUSTRIAL VALVES. LOW FLOW
OPERATING CAPABILITY, GLOBE CONFIGURATION.
11
RAIN BIRD 44-LRC
1IN. BRASS QUICK-COUPLING VALVE, WITH
CORROSION-RESISTANT STAINLESS STEEL SPRING, LOCKING
THERMOPLASTIC RUBBER COVER, AND 2-PIECE BODY.
8
DRAIN VALVE 1
ZURN 375-BP 2-1/2"
REDUCED PRESSURE BACKFLOW PREVENTER.
SIZES 2 1/2IN., 3IN., 4IN., 6IN., 8IN., 10IN.
1
RAIN BIRD ESPLXIVM-LXMM
60 STATION, 2-WIRE CONTROLLER W/ SMART VALVE
TECHNOLOGY. (1) ESPLXIVM 60-STATION, INDOOR/OUTDOOR,
PLASTIC WALL-MOUNT ENCLOSURE. INSTALLED IN LXMM
POWDER COATED, METAL WALL-MOUNTED CABINET. SYSTEM
REQUIREMENTS: RAIN BIRD LXIVM-XXX INTEGRATED VALVE
MODULES & 2-WIRE DEVICES. USE PAIGE ELECTRIC CABLE
P7072D & RAIN BIRD WC20 DRY SPLICES ONLY. GROUND
SYSTEM W/ (X) LXIVMSD SURGE DEVICE IN RAIN BIRD ROUND
VALVE BOXES. INSTALL PER MANUFACTURERS
RECOMMENDATIONS.
1
RAIN BIRD RSD-BEX
RAIN SENSOR, WITH METAL LATCHING BRACKET, EXTENSION
WIRE.
1
RAIN BIRD FS-300-P
3IN. FLOW SENSOR, PLASTIC PVC MODEL. SUGGESTED
OPERATING RANGE 20.0 GPM TO 300.0 GPM. SIZE FOR FLOW
NOT ACCORDING TO PIPE SIZE. RAIN BIRD COMPATIBLE
CONTROLLERS: ESP-LXIVM(P) | LXD | LXME2(P) | ME3, OR
CONTROLLERS ACCEPTING CUSTOM K-FACTOR AND OFFSET.
INSTALL IN RAIN BIRD VALVE BOX.
1
FLOW CONTROL VALVE
IN-LINE MANUAL BALL VALVE TO ISOLATE PARTS OF MAIN LINE.
PLACED IN INDEPENDENT VALVE BOX. TO MATCH MAINLINE
SIZE AT AREA OF INSTALLATION.
5
IRRIGATION LATERAL LINE: PVC CLASS 200 SDR 21 17,155 L.F.
IRRIGATION MAINLINE: PVC SCHEDULE 40 3,256 L.F.
PIPE SLEEVE: PVC SCHEDULE 40 1,522 L.F.
14 ADJ 14 F
18 18
18 ADJ 18 F
24 24
24 ADJ 24 F
3.0
C
RS
FS
FC
^^^^Valve Callout
PLANT TYPE # GALLONS # PLANTS TOTAL GALLON/YEAR
PERENNIAL/GRASS WATER WISE 1.25 GAL/WEEK 1,396 34,900
PERENNIAL/GRASS NON-WATER WISE 2.5 GAL/WEEK 455 22,750
SHRUB WATER WISE 2.5 GAL/WEEK 1,248 62,400
SHRUB NON-WATER WISE 5 GAL/WEEK 441 44,100
ALL TREES 20 GAL/WEEK 125 50,000
SUB IRRIGATED LAWN AREA 6,762 GAL/WEEK 8,665 SQFT 135,240
ROTARY IRRIGATED LAWN 25,571 GAL/WEEK 22,225 SQFT 511,420
TEMP ROTARY NATIVE GRASS 9,320 GAL/WEEK 13,524 SQFT 186,400
PLANTING TOTAL WATER USE 214,150
PLANTING AND LAWN TOTAL WATER
USE (NOT INCLUDING TEMP ZONES)1,047,210
NUMBER MODEL TYPE PRECIP IN./WEEK MIN./WEEK GAL./WEEK GAL./DAY
1 RAIN BIRD PEB TURF ROTARY 0.67 in/h 1.25 113 2,227 557
2 RAIN BIRD PEB TURF ROTOR 0.75 in/h 1.25 100 4,327 1,082
3 RAIN BIRD XCZ-150-LCS AREA FOR DRIP EMITTERS 0.16 in/h 1 380 592 148
4 RAIN BIRD PEB TURF ROTARY 0.74 in/h 1.25 103 4,934 1,233
5 RAIN BIRD PEB TURF ROTARY 0.66 in/h 1.25 114 4,908 1,227
6 RAIN BIRD PEB TURF ROTOR 0.75 in/h 1.25 100 4,993 1,248
7 RAIN BIRD PEB TURF ROTARY 0.67 in/h 1.25 113 1,609 402
8 RAIN BIRD XCZ-150-LCS AREA FOR DRIPLINE 1.44 in/h 1.25 52 778 195
9 RAIN BIRD XCZ-150-LCS AREA FOR DRIP EMITTERS 0.36 in/h 1 167 3,403 851
10 RAIN BIRD XCZ-150-LCS AREA FOR DRIPLINE 1.38 in/h 1.25 55 607 152
11 RAIN BIRD XCZ-150-LCS AREA FOR DRIPLINE 1.44 in/h 1.25 52 1,565 391
12 RAIN BIRD XCZ-150-LCS AREA FOR DRIPLINE 1.44 in/h 1.25 52 1,220 305
13 RAIN BIRD XCZ-150-LCS AREA FOR DRIPLINE 1.44 in/h 1.25 52 994 248
14 RAIN BIRD PEB TURF ROTARY 0.64 in/h 1.25 118 891 223
15 RAIN BIRD PEB TURF ROTARY 0.6 in/h 1.25 126 1,316 329
16 RAIN BIRD XCZ-150-LCS AREA FOR DRIPLINE 1.44 in/h 1.25 52 1,066 267
17 RAIN BIRD XCZ-150-LCS AREA FOR DRIPLINE 1.44 in/h 1.25 52 1,139 285
18 RAIN BIRD PEB TURF ROTARY 0.71 in/h 1.25 106 6,130 1,532
19 RAIN BIRD XCZ-150-LCS AREA FOR DRIPLINE 1.48 in/h 1.25 51 312 78.0
20 RAIN BIRD XCZ-150-LCS AREA FOR DRIP EMITTERS 0.34 in/h 1 178 2,782 695
21 RAIN BIRD PEB TURF ROTARY 0.59 in/h 1.25 128 888 222
22 RAIN BIRD PEB TURF ROTARY 0.61 in/h 1.25 123 2,668 667
23 RAIN BIRD XCZ-150-LCS AREA FOR DRIP EMITTERS 0.51 in/h 1 117 2,492 623
24 RAIN BIRD XCZ-150-LCS AREA FOR DRIPLINE 1.48 in/h 1.25 51 294 73.4
25 RAIN BIRD XCZ-150-LCS AREA FOR DRIP EMITTERS 0.3 in/h 1 197 1,010 253
TOTALS:2,752 53,143 13,286
#"
#
Valve Number
Valve Size
Valve Flow#
UULC
IRRIGATION SC+EDULE
Project Number:
Drawn By:
Reviewed By:
Approved By:
Issue Date
ThinkOne Architects
101 E Main St. Studio 1
Bozeman, MT, 59715
T: 406-586-7020
Architect
MEP Engineer
Landscape Architect
Civil Engineer
Seal
Project Number
Sanderson Stewart
106 East Babcock St.
Suite L1
Bozeman, MT 59715
T: 406-522-9876
AndersonMasonDale Architects, P.C.
3198 Speer Boulevard
Denver, CO 80211
T: 303-294-9448
Associate Architect
Structural Engineer
Morrison-Maierle, Inc.
2880 Technology Blvd.
Bozeman, MT 59715
T: 406-587-0721
Morrison-Maierle, Inc.
2880 Technology Blvd.
Bozeman, MT 59715
T: 406-587-0721
Sanderson Stewart
106 East Babcock St.
Suite L1
Bozeman, MT 59715
T: 406-522-9876
3/29/2023 4:27:07 PML3.0
IRRIGATION SCHEDULE AND NOTES
CS
RPE
RPE
21-723BARNARD OFFICE HQ
21-723
BOZEMAN, MT
ROYAL WOLF WAY01/25/23SITE PLAN SUBMITTAL
03/29/23SITE PLAN RESUBMITTAL
BARNARD CONSTRUCTION
IRRIGATION NOTES
1.THIS SYSTEM DESIGN ASSUMES A MINIMUM DYNAMIC PRESSURE FOR THE IRRIGATION SYSTEM OF 75 PSI, AT A MAXIMUM DISCHARGE OF 100
GPM AT THE 3" POINT-OF-CONNECTION. VERIFY PRESSURE AND FLOW ON SITE PRIOR TO CONSTRUCTION.
2.THE IRRIGATION SYSTEM POINT-OF-CONNECTION SHALL BE IN MECHANICAL ROOM IN BUILDING AT SOURCE PROVIDED APPROXIMATE
LOCATION SHOWN. INSTALL BACKFLOW PREVENTION/ANTI SIPHON ASSEMBLY PER CITY & STATE BUILDING CODES. VERIFY EXACT LOCATION
OF P.O.C. WITH OWNERS REPRESENTATIVE.
3.CONTROLLER AT THE APPROXIMATE LOCATION SHOWN. COORDINATE ELECTRICAL POWER TO THE CONTROLLER WITH THE OWNER'S
REPRESENTATIVE. CARE SHOULD BE TAKEN TO INSTALL THE IRRIGATION CONTROLLER IN A LOCATION THAT IS ACCESSIBLE FOR
MAINTENANCE. FINAL LOCATION TO BE APPROVED BY OWNERS REPRESENTATIVE.
4.COORDINATE UTILITY LOCATES OF ALL UNDERGROUND UTILITIES PRIOR TO CONSTRUCTION.
5.DO NOT PROCEED WITH THE INSTALLATION OF THE IRRIGATION SYSTEM WHEN IT IS OBVIOUS IN THE FIELD THAT OBSTRUCTIONS OR GRADE
DIFFERENCES EXIST THAT MIGHT NOT HAVE CONSIDERED IN THE DESIGN PROCESS. IF DISCREPANCIES IN CONSTRUCTION DETAILS, LEGEND,
NOTES OR SPECIFICATIONS ARE DISCOVERED, BRING ALL SUCH OBSTRUCTIONS OR DISCREPANCIES TO THE ATTENTION OF THE OWNER'S
REPRESENTATIVE.
6.DRAWINGS ARE DIAGRAMMATIC. THEREFORE, THE FOLLOWING SHOULD BE NOTED:
A.ALTHOUGH IRRIGATION COMPONENTS MAY BE SHOWN OUTSIDE OF PLANTING AREAS FOR CLARITY, INSTALL IRRIGATION PIPE, WIRING,
VALVES, ETC. IN LANDSCAPED AREAS AND WITH PROPERTY LINES.
B.TREE AND SHRUB LOCATION SHOWN ON LANDSCAPE PLANS TAKE PRECEDENCE OVER IRRIGATION EQUIPMENT LOCATIONS. AVOID CONFLICTS
BETWEEN THE IRRIGATION SYSTEM, PLANTING MATERIALS, AND ARCHITECTURAL FEATURES.
C.USE ONLY STANDARD TEES AND ELBOW FITTINGS.
7.PROVIDE THE FOLLOWING COMPONENTS TO THE OWNER PRIOR TO THE COMPLETION OF THE PROJECT:
A.TWO (2) OPERATING KEYS FOR EACH TYPE OF MANUALLY OPERATED VALVES AND CONTROLLERS.
8.THE IRRIGATION CONTRACTOR IS RESPONSIBLE FOR THE INSTALLATION OF IRRIGATION SLEEVING. SLEEVES ARE REQUIRED FOR BOTH PIPING
AND ELECTRICAL WIRING AT EACH HARDSCAPE CROSSING. COORDINATE INSTALLATION OF SLEEVING WITH OTHER TRADES. ANY PIPE OR
WIRE WHICH WAS NOT INSTALLED WILL REQUIRE HORIZONTAL BORING BY THE IRRIGATION CONTRACTOR. IRRIGATION CONTRACTOR TO
COORDINATE WITH SITE CONTRACTOR FOR TIME OF INSTALLATION AND LOCATION OF ANY SLEEVE AND/OR CONDUIT INSTALLATION.
9.INSTALL ALL ELECTRICAL POWER TO THE IRRIGATION CONTROL SYSTEM IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE AND ALL
APPLICABLE LOCAL ELECTRIC UTILITY CODES.
10.INSTALL TWO (2) #14 AWG CONTROL WIRES FROM CONTROLLER LOCATION TO EACH DEAD-END OF MAINLINE FOR USE AS SPARE INCASE OF
CONTROL WIRE FAILURE. COIL 3 FEET OF WIRE IN VALVE BOX.
11.ALL PLANT MATERIAL NOT LOCATED IN LAWN AREAS SHALL BE DRIP IRRIGATED BY AUTOMATIC CONTROLLED SYSTEM. RAINBIRD EQUIPMENT
OR EQUAL. A COMPLETE LIST OF EQUIPMENT, SHOP DRAWING CATALOG CUTS, LAYOUT PERFORMANCE AND MAINTENANCE WARRANTY
INFORMATION SHALL BE SUBMITTED TO THE OWNERS REPRESENTATIVE FOR APPROVAL PRIOR TO COMMENCING WORK. SAID INFORMATION
SHALL BE COMPILED ALONG WITH AS-BUILT DRAWINGS AND MAINTENANCE INSTRUCTION AND SUBMITTED TO OWNER'S REPRESENTATIVE FOR
APPROVAL AT FINAL COMPLETION. CONTRACTOR SHALL DEMONSTRATE COMPLETE OPERATING SYSTEM AND MAINTENANCE TO OWNER'S
REPRESENTATIVE AND OWNER'S MAINTENANCE AND OPERATING PERSONNEL.
12.CONTRACTOR SHALL BE REQUIRED TO START UP AND WINTERIZE SYSTEM FOR THE WARRANTY PERIOD, ONE YEAR FROM FINAL COMPLETION,
AND MAKE ALL ADJUSTMENTS AND REPAIRS REQUIRED TO INSURE EFFICIENT OPERATION.
13.CONTRACTOR SHALL PROVIDE ALL REQUIRED IRRIGATION WATER CONTROL, FILTRATION, PRESSURE REGULATION, WASTE AND DRAINAGE
REQUIREMENTS OF A COMPLETE MAINTENANCE SYSTEM.
14.CONTRACTOR SHALL PROVIDE DRIP RINGS TO EACH TREE, 2 EACH 1 G.P.H. EMITTERS TO EACH SHRUB, VINE OR HERBACEOUS PLANT. ALL
EQUIPMENT SHALL BE CONCEALED OR OTHERWISE PROTECTED UNDER SPECIFIED MULCHES AND IN VALVE BOXES WHERE ACCESS IS REQUIRED.
15.THE BOULEVARDS ALONG ROYAL WOLF AND PRINCE LANE SHALL BE DRIP IRRIGATED WITH RAIN BIRD XFS DRIP LINE. DRIP LINE SHALL BE
INSTALLED 3" BELOW EDGE OF CURB AND BE TOP DRESSED WITH APPROXIMATELY 3" OF TOP SOIL UN-COMPACTED. DRIPLINE SHALL BE
INSTALLED PER DETAIL 7/L4.1 AND PER MANUFACTURERS SPECIFICATIONS. HYDROSEEDING SHALL BE APPLIED IN A DORMANT SEEDING
APPLICATION. DRIPLINE SHALL BE TURNED ON IN SPRING TO ALIGN WITH NATURAL GERMINATION AND MOISTURE.
WATER CONSUMPTION
WATER SC+EDULE
WATER CONSUMPTION ASSUMES WATER MONTHS MAY-SEPTEMBER FOR ESTABLISHED LANDSCAPE
1.WATER SCHEDULE INCLUDES ESTABLISHMENT PERIOD FOR TEMPORARY ROTOR ZONES.
2.ZONES TWO AND SIX WILL BE TURNED OFF AFTER ESTABLISHMENT.
9AL9E CALLOUT