HomeMy WebLinkAbout016_L3.1IrrigationPlanSYMBOL DESCRIPTION QTY PRECIP PSI GPM
DRIP IRRIGATION 3,636 s.f.0.8 in/h 30 30
EXISTING IRRIGATION
ADJUST HEADS IF NEEDED TO CREATE EVEN COVERAGE 5,057 s.f.0.6 in/h 45 32
TURF ROTORS 30,526 s.f.0.6 in/h 50 190
TURF SPRAY 10,671 s.f.0.6 in/h 45 67
SYMBOL MANUFACTURER/MODEL/DESCRIPTION QTY PSI GPM RADIUS
Hunter I-20-06
Turf Rotor, 6" Pop-Up. Adjustable and Full Circle. Plastic Riser.
Drain Check Valve. Standard Nozzle.
14 35 2.70 36'
SYMBOL MANUFACTURER/MODEL/DESCRIPTION QTY
Hunter PGV-100G
1" Plastic Electric Remote Control Valve, for Residential/Light
Commercial Use. Female NPT Inlet/Outlet. Globe Configuration,
No Flow Control.
3
Rain Bird 5-RC
1" Brass Quick-Coupling Valve, with Corrosion-Resistant Stainless
Steel Spring, Thermoplastic Rubber Cover, and 1-Piece Body.
2
Rain Bird ESP4ME3 with (3) ESP-SM3
13 Station, Hybrid Modular Outdoor Controller. For Residential or
Light Commercial Use. LNK WiFi Module and Flow Sensor Ready.
1
Weathermatic
Existing Controller 1
EXISTING WELL 1
Irrigation Lateral Line: PVC Class 200 SDR 21 848.9 l.f.
Irrigation Mainline: PVC Class 200 SDR 21 1,001 l.f.
Pipe Sleeve: PVC Schedule 40 33.5 l.f.
IC
C
IRRIGATION SCHEDULE
BLOCK ROCK
EXISTING FENCING
PROPOSED FENCING
LIMITS OF DISTURBANCE
ALTERNATE BID - UPPER MOUNTAIN BIKE START HILL
SEE SHEET L1.5 FOR PLAZA
LANDSCAPE PLAN
C
MOVE EXISTING VALVES CLOSER
TO CMG AND REPLACE WITH NEW
VALVES TO ENSURE PROPER
IRRIGATION IN THE EXISTING CMG
IRRIGATION CONTROLLER
EXTERIOR PEDESTAL MOUNT
IRRIGATION ZONES TO THE
SOUTH WILL RUN OFF EXISTING
WELL.NEW IRRIGATION CLOCK
SHALL BE INSTALLED TO RUN
ALL ZONES ON SOUTHERN WELL
IC
7
L3.2
CONTROLLER WITH PAD
ENSURE THAT ALL VALVES ARE
IRRIGATION RELATED PRIOR TO
ANY WORK.
10
L3.2
ROTARY HEAD WITH SDR 35
PIPE
QUICK CONNECT VALVES
COORDINATE WITH OWNERS
REPRESENTATIVE FOR FINAL
LOCATION
13.51
1"
10.82
1"
13.53
1"
UULC FILE:PROJECT NO:CAD:QUALITY ASSURANCE:DRAWING HISTORYDATE DESCRIPTION----IRRIGATION PLANWESTLAKE PARK IMPROVEMENTSWESTLAKE PARK, BLOCK 1, WESTLAKE'S FOURTH SUBDIVISIONBOZEMAN, MONTANAL3.1 EJS18098_18_LS_IRRIG.DWGALM08/03/211ST SP SUBMITTAL09/27/2212/27/22----2ND SP SUBMITTAL3RD SP SUBMITTAL------18098.18IRRIGATION SCHEDULE
IRRIGATION NOTES
1.THIS SYSTEM DESIGN ASSUMES AN EXISTING WELL FOR THE POINT OF CONNECTION. VERIFY PRESSURE AND FLOW ON SITE PRIOR TO CONSTRUCTION.
2.CONTROLLER AT THE APPROXIMATE LOCATION SHOWN. COORDINATE ELECTRICAL POWER TO THE CONTROLLER WITH THE OWNER'S REPRESENTATIVE. CARE SHOULD BE
TAKEN TO INSTALL THE IRRIGATION CONTROLLER IN A LOCATION THAT IS ACCESSIBLE FOR MAINTENANCE. FINAL LOCATION TO BE APPROVED BY OWNERS
REPRESENTATIVE.
3.COORDINATE UTILITY LOCATES OF ALL UNDERGROUND UTILITIES PRIOR TO CONSTRUCTION.
4.DO NOT PROCEED WITH THE INSTALLATION OF THE IRRIGATION SYSTEM WHEN IT IS OBVIOUS IN THE FIELD THAT OBSTRUCTIONS OR GRADE DIFFERENCES EXIST THAT
MIGHT NOT HAVE CONSIDERED IN THE DESIGN PROCESS. IF DISCREPANCIES IN CONSTRUCTION DETAILS, LEGEND, NOTES OR SPECIFICATIONS ARE DISCOVERED, BRING
ALL SUCH OBSTRUCTIONS OR DISCREPANCIES TO THE ATTENTION OF THE OWNER'S REPRESENTATIVE.
5.DRAWINGS ARE DIAGRAMMATIC. THEREFORE, THE FOLLOWING SHOULD BE NOTED:
A.ALTHOUGH IRRIGATION COMPONENTS MAY BE SHOWN OUTSIDE OF PLANTING AREAS FOR CLARITY, INSTALL IRRIGATION PIPE, WIRING, VALVES, ETC. IN LANDSCAPED
AREAS AND WITH PROPERTY LINES.
B.TREE AND SHRUB LOCATION SHOWN ON LANDSCAPE PLANS TAKE PRECEDENCE OVER IRRIGATION EQUIPMENT LOCATIONS. AVOID CONFLICTS BETWEEN THE IRRIGATION
SYSTEM, PLANTING MATERIALS, AND ARCHITECTURAL FEATURES.
C.USE ONLY STANDARD TEES AND ELBOW FITTINGS.
7.PROVIDE THE FOLLOWING COMPONENTS TO THE OWNER PRIOR TO THE COMPLETION OF THE PROJECT:
A.TWO (2) OPERATING KEYS FOR EACH TYPE OF MANUALLY OPERATED VALVES AND CONTROLLERS.
8.THE IRRIGATION CONTRACTOR IS RESPONSIBLE FOR THE INSTALLATION OF IRRIGATION SLEEVING. SLEEVES ARE REQUIRED FOR BOTH PIPING AND ELECTRICAL WIRING AT
EACH HARDSCAPE CROSSING. COORDINATE INSTALLATION OF SLEEVING WITH OTHER TRADES. ANY PIPE OR WIRE WHICH WAS NOT INSTALLED WILL REQUIRE
HORIZONTAL BORING BY THE IRRIGATION CONTRACTOR. IRRIGATION CONTRACTOR TO COORDINATE WITH SITE CONTRACTOR FOR TIME OF INSTALLATION AND LOCATION
OF ANY SLEEVE AND/OR CONDUIT INSTALLATION.
9.INSTALL ALL ELECTRICAL POWER TO THE IRRIGATION CONTROL SYSTEM IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE AND ALL APPLICABLE LOCAL ELECTRIC
UTILITY CODES.
10.INSTALL TWO (2) #14 AWG CONTROL WIRES FROM CONTROLLER LOCATION TO EACH DEAD-END OF MAINLINE FOR USE AS SPARE INCASE OF CONTROL WIRE FAILURE. COIL
3 FEET OF WIRE IN VALVE BOX.
11.ALL PLANT MATERIAL NOT LOCATED IN LAWN AREAS SHALL BE DRIP IRRIGATED BY AUTOMATIC CONTROLLED SYSTEM. RAINBIRD EQUIPMENT OR EQUAL. A COMPLETE LIST
OF EQUIPMENT, SHOP DRAWING CATALOG CUTS, LAYOUT PERFORMANCE AND MAINTENANCE WARRANTY INFORMATION SHALL BE SUBMITTED TO THE OWNERS
REPRESENTATIVE FOR APPROVAL PRIOR TO COMMENCING WORK. SAID INFORMATION SHALL BE COMPILED ALONG WITH AS-BUILT DRAWINGS AND MAINTENANCE
INSTRUCTION AND SUBMITTED TO OWNER'S REPRESENTATIVE FOR APPROVAL AT FINAL COMPLETION. CONTRACTOR SHALL DEMONSTRATE COMPLETE OPERATING SYSTEM
AND MAINTENANCE TO OWNER'S REPRESENTATIVE AND OWNER'S MAINTENANCE AND OPERATING PERSONNEL.
12.CONTRACTOR SHALL BE REQUIRED TO START UP AND WINTERIZE SYSTEM FOR THE WARRANTY PERIOD, ONE YEAR FROM FINAL COMPLETION, AND MAKE ALL ADJUSTMENTS
AND REPAIRS REQUIRED TO INSURE EFFICIENT OPERATION.
13.CONTRACTOR SHALL PROVIDE ALL REQUIRED IRRIGATION WATER CONTROL, FILTRATION PRESSURE REGULATION, WASTE AND DRAINAGE REQUIREMENTS OF A COMPLETE
MAINTENANCE SYSTEM.
14.ALL ROTARY HEADS IN THE DIRT JUMP AREA SHALL BE INSTALLED WITH SDR 35 PIPE PROTECTION. SEE DETAIL 10/L3.2.
15.FINAL LOCATION OF ALL HEADS IN DIRT JUMP AREA SHALL BE CONFIRMED BY OWNERS REPRESENTATIVE AND DIRT JUMP CONTRACTOR.
16.ALL IRRIGATION IN LAWN AREAS SHALL BE HEAD TO HEAD COVERAGE. THE INTENT OF THE IRRIGATION IN THE DIRT JUMP AREA IS TO DECREASE DUST, IMPROVE DIRT
QUALITY, AND PROVIDE ASSISTANCE WITH MAINTENANCE ON THE FEATURES. THEREFORE, HEAD TO HEAD COVERAGE IS NOT REQUIRED IN THIS AREA.
17.CONTRACTOR SHALL PROVIDE 3 EACH 2 G.P.H. EMITTERS TO EACH TREE, 2 EACH 1 G.P.H. EMITTERS TO EACH SHRUB, VINE OR HERBACEOUS PLANT. ALL EQUIPMENT SHALL
BE CONCEALED OR OTHERWISE PROTECTED UNDER SPECIFIED MULCHES AND IN VALVE BOXES WHERE ACCESS IS REQUIRED.
18.ALL EXISTING IRRIGATION SHALL CONTINUE TO OPERATE OFF OF EXISTING WELL. A NEW CLOCK WILL BE REQUIRED TO MANAGE EXISTING ZONES.
19.ALL EXISTING ZONES WILL STAY CONSISTENT WITH PREVIOUS SEPARATION UNLESS OTHERWISE NOTED.
LEGEND
0
SCALE: 1" = 30'
1530
IRRIGATION PLAN
PLANT TYPE SQUARE FT IRRIGATION TYPE TOTALS*
TREES, SHRUBS, AND
GROUNDCOVERS 3,636 SF DRIP EMITTERS 5,188 GAL PER MONTH
SEEDING (ROTORS)30,526 SF TURF ROTARY 190,337 GAL PER MONTH
SEEDING (SPRAY)10,671 SF TURF SPRAY 71,654 GAL PER MONTH
TOTAL 44,833 SF 267,179 GAL PER MONTH
ESTIMATED WATER CONSUMPTION
* ESTIMATED TOTALS BASED ON SITE'S PEAK WATERING MONTH
p:\18098_18_westlake_bmx_track_landscape_&_design\CADD_C3D\production_dwg\18098_18_LS_IRRIG.dwg, IRRIGATION PLAN, 12/27/2022 2:49:45 PM, amartoncik, 1:1