HomeMy WebLinkAbout15-PLNAPP-569_N1SignDrawings CONSTRUCTION SET NOTE:
THE FOLLOWING PAGES (DESIGN NO. N-010801, N1-N3) ARE PROVIDED BY
�-�SIGN TYPE "A" FEDERAL SIGN TO RELAY SIGN PLACEMENT' SIGN CONSTRUCTION AND
a �
33'-0" SIGN CIRCUIT ELECTRICAL DETAILS ONLY. ELEVATION DETAILS ARE z
EVERSE CHANNEL LED LED BORDER REPRESENTATIVE OF TYPICAL PROTOTYPE 2C CONSTRUCTION AND ARE Q
IL
LETTER (TYP.) REVERSE DOGOCHANN W/ LIGHT SHIELDS NOT TO BE REFERENCED FOR BUILDING CONSTRUCTION PURPOSES. 2
4
O
7'-D" V
3'-0= � 000 0
k 2
\� LIN
FRONT ELEVATION
N-1 SCALE: 1/8" = V-0"
GENERAL SPECIFICATIONS:
A-DISPLAYS:
1.BORDERLED: TO BE SLOAN SINGLE ROW LEDSTRIPE #701189AE-WQp 'L
2.SIGN TYPES"A""B"&"C": REVERSE CHANNEL LED LETTERS. FACE & RETURNS 0 o i ° L 0-LD
LED BORDER PAINTED TO MATCH: AKZO 108 D-5 RED WITH SLOAN PRISM LED LIGHTING.
W/ LIGHT SHIELDS CHANNEL LETTER STAND OFF 2". "STATE" 3M #76 HOLLY GREEN VINYL OVERLAY °o o
s
WITH A 1.875" EDGE BORDER ON THE "STATE OF TEXAS" PAINT RETURNS WHITE. "HAT" IS WHITE CHANNEL WITH PMS 122 YELLOW and #22 BLACK VINYL.
ACCENT.
3.SIGN TYPE"D": FCO S/F .250 ALUMINUM PAINTED SEMI-GLOSS BLACK FINISH
ON FACE and SIDES. "TEXAS LOGO" VINYL COLOR APPLIED TO FACE SURFACE.
BKG'D IS ARLON 2150-43 LIGHT TOMATO RED W/ 3/4" 2150-15 YELLOW
BORDER. H
"HAT" IS 2150-22 BLACK W/ 2150-15YELLOW OUTLINE. W
STATE IS 2150-76 HOLLY GREEN W/ 2150-15 YELLOW OUTLINE. ® z
"TEXAS ROADHOUSE" COPY TO BE WHITE VINYL. A
"ACCENT STRIPES" TO BE WHITE VINYL W/21500-43 RED VINYL OUTLINE ON
FIRST SURFACE.
14.SIGN TYPE"E": FCO S/F .250 ALUMINUM PAINTED SEMI-GLOSS BLACK FINISH
ON FACE and SIDES. "TEXAS ROADHOUSE" & "TO-GO" COPY TO BE WHITE
VINYL.
s LEFT ELEVATION "ACCENT STRIPES" TO BE WHITE VINYL W/21500-43 RED VINYL OUTLINE ON
N-1 SCALE: 1/8" = v-0" FIRST SURFACE.
B-ELECTRICAL REQUIREMENTS: O� a
I.PRIMARY CIRCUITS:IT IS THE THE RESPONSIBILITY OF THE GENERAL o
CONTRACTOR TO MAKE FINAL CONNECTION AND PROVIDE THE REQUIRED NUMBER b
OF BRANCH CIRCUITS TO EACH SIGN LOCATION. ALL BRANCH CIRCUITS FEEDING
SIGN TYPE "B" THE DISPLAYS SHALL MEET THE REQUIREMENTS OF NEC AND ALL LOCAL >
29'-11" REGULATORY REQUIREMENTS. ALL BRANCH CIRCUITS SHALL BE DEDICATED TO
REVERSE C ANNI L LED REVERSE CHANNEL SIGNS (INCLUDING GROUND AND NEUTRAL) AND SHALL NOT BE SHARED WITH w
LETTER (TYP.) LED LOGO OTHER LOADS. PROPERLY SIZED GROUND WIRE THAT CAN BE TRACED BACK TO
THE BREAKER PANEL SHALL BE PROVIDED. SHARING OF NEUTRAL WITH OTHER N
LED BORDER LOADS SUCH AS LIGHTING, AIR-CONDITIONING AND OTHER EQUIPMENT IS NOT o
W/ LIGHT SHIELDS ALLOWED. SHARED NEUTRAL WITHIN SIGN CIRCUITS MAY BE ALLOWED ONLY IF
BALANCED OPPOSITE PHASING IS PROVIDED. ANY DEVIATION FROM THE ABOVE _ �
w
6'-0" MAY RESULT IN DAMAGE, DELAYS AND ADDITIONAL COSTS. - o
2.SIGN INSTALLATION: a °
INSTALLATION MUST MEET SECTION 600 OF NEC AND UL 48 REQUIREMENTS.
ALL TRANSFORMERS SHALL BE UL2161 LISTED. ALL COMPONENTS SHALL BE
INSTALLED IN ACCORDANCE WITH THE MANUFACTURER'S INSTALLATION
INSTRUCTIONS.[77]t
NQ= m
w
Q
o ' a
s RIGHT ELEVATION SIGN TYPE "D" SIGN TYPE "E"
N-1 SCALE: 1/8" = V-0"
N
Z
_O
C (n
f w
SIGN TYPE "C" �
33'-0"
LED BORDER
REVERSE CHANNEL LED REVERSE CHANNELW/ LIGHT SHIELDS a a a a a
LETTER (TYP.) o
LED LOGO
z
GC'S ELECTRICAL- C❑NTRACTCR:
7.I O,. '-() 0 000 0 � ESIGN N0:
3
WALL FINAL ELECTRICAL_ C❑NNECTI❑NS MADE BY PROJECT MGR.:
ELECTRICAL C❑NTRACT❑R. S. MAESER
DRAWN BY:
K. SINGLETON
DATE:
4/12/22
APPROVED BY: SM
SCALE:
JOB NO:
AS NOTED
oop
a REAR ELEVATION
N-1 SCALE: 1/8" = V-0"
SH N —
N-1 4