Loading...
HomeMy WebLinkAboutAppendix 2 - Common Open Space Lighting Information 11x17 Cannery District Planned Unit Development Preliminary PUD Application Cannery District Partners, llc Appendix 2 Common Open Space Lighting Information ECOFORM OUTDOOR SITE & AREA PHILIPS GARDCO, LED SITE & AREA LUMINAIRE, ECOFORM The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. EcoForm features an innovative retrofit arm kit, simplifying site conversions to LED by eliminating the need to drill additional holes in most existing poles. Integral control systems available for further energy savings. Redefining value with outstanding performance Project: Location: Catalog No: Fixture Type: Mfg: Qty: Notes: G200-047 08/13 page 1 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Ordering guide Prefix Mounting Optics LED Array & LED Wattage LED Selection Voltage Finish Options ECF EcoForm Standard Luminaire ECF-DIM EcoForm with 0-10V Dimming ECF-APD1 EcoForm with Auto Profile Dimming ECF-MR502 EcoForm with Motion Response at 50% low Pole mounted sensor ECF-APD-MRO2 EcoForm with Auto Profile Dimming and Motion Response Override Pole mounted sensor ECF-MRI2,4 EcoForm with Motion Response at 50% low Luminaire mounted sensor ECF-APD-MRI2,4 EcoForm with Auto Profile Dimming with Motion Response Override Luminaire mounted sensor 1 Single 2 2@180 2@90 2@90 3 3@90 3@120 3@120 4 4@90 WS Wall mount including Surface conduit Rear entry permitted MA Mast Arm Fitter (requires 2-3/8" O.D. Mast Arm) 2 Type 2 3 Type 3 4 Type 4 5 Type 5 530 mA 55LA-32531 75LA-4853 100LA-6453 700mA 70LA-3270 105LA-4870 135LA-6470 1050mA 105LA-321A1 160LA-481A 215LA-641A CW 5,700K 70 CRI NW 4,000K 70 CRI WW3 3,000K 70 CRI UNV 120-277V HVU 347-480V 120 208 240 277 347 480 BRP Bronze Paint BLP Black Paint WP White Paint NP Natural Paint OC Optional Color Specify optional color or RAL ex: OC-LGP or OC-RAL7024. SC Special Color Specify. Must supply color chip. Requires factory quote. TL Tool-Less entry & driver removal hardware TB4 Terminal Block IS5 Internal Shield LF6,10 Line Fusing LFC6,10 Line Fusing for Canada PCR Photocell Receptacle Only PC6,7,10 Receptacle with Photocell PCB6,7,10 Photocell Button RAM Retrofit Arm Mount Kit PTF28 Pole Top Fitter for 2-3/8"-3" Tenon PTF38 Pole Top Fitter for 3"-3.5" Tenon PTF48 Pole Top Fitter for 3.5"-4" Tenon RPA9 Round Pole Adaptor for 3" to 3.9" OD BD Bird Deterrant (field installed only) 1. Available in 120V thru 277V only. 4. ECF-MRI requires outboarded sensor 6. Voltage must be specified. 9. No adaptor required for 4" round poles. 2. Available in 120V or 277V only. when used with Terminal Block (TB) option. 7. Not available in 480V. RPAs provided with Black Paint standard. 3. Contact factory for lead times on warm white. 5. Not available with Type 5 optics. 8. Not available in 3 @ 120. 10. Not available with UNV (120-277V). ® ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 2 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires LED Wattage and Lumen Values - Standard EcoForm Luminaire EcoForm Drill Template (Standard Arm Mount) Initial Lumens12 Order Code (standard units) Array Quantity Total LEDs LED Current (mA) Average System Watts11 LED Selection 2 Type 2 3 Type 3 4 Type 4 5 Type 5 55LA-3253 232530 52 NW5,994 (s)5,895 (s)5,823 (s)5,588 (s) 75LA-4853 348530 77NW8,899 (s)8,753 (s)8,646 (s)8,297 (s) 100LA-6453 464530 103NW11,896 (s)11,700 11,558 11,091 70LA-3270 232700 69 NW7,385 (s)7,576 (s)7,293 (s)7,068 (s) 105LA-4870 348700 104NW10,965 (s)11,249 (s)10,828 (s)10,494 (s) 135LA-6470 464700 139NW14,657 (s)15,037 14,475 (s)14,028 105LA-321A 2321050107NW10,199 (s)10,458 10,072 (s)9,767 160LA-481A 3481050158NW15,144 (s)15,565 14,955 (s)14,465 215LA-641A 4 64 1050 211 NW 20,243 20,252 19,991 19,880 11. System input wattage may vary based on input voltage, by up to +/- 10% , and based on manufacturer forward voltage, by up to +/- 8%. 12. Lumen values based on photometric tests performed in compliance with IESNA LM-79. (s). Data is scaled based on tests of similar, but not identical, luminaires. Accessories (Order Separately) FS1R-100 MR hand held programmer (For use with 'MRI' motion response when field programming is required). If desired, only one is needed per job. MS-A-120V 120V input - Motion Sensor for MR50 or APD-MRO MS-A-277V 277V input - Motion Sensor for MR50 or APD-MRO 1.00” 2.54 cm 2.50” 6.35 cm 2.0” 5.08 cm Ø 0.41” 1.04 cm Ø 0.875” 2.22 cm Note: For reference only. Drawing not to scale. ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 3 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Dimensions - Standard EcoForm Luminaire Dimensions - EcoForm with Mast Arm Fitter (MA) Dimensions - EcoForm with Wall Mount (WS) Dimensions - EcoForm with Retrofit Arm Mount (RAM) 13”33 cm 3.3”8.38 cm 2.1” 5.3 cm 1.3”3.3 cm 24.2”61.47 cm 2.5”6.35 cm 24.2” 61.47 cm 6.1”15.5 cm Top View Top View Top View Top View Side View Side View Side View Side View End View End View End View End View 2.2” 5.58 cm 26”66.04 cm 23.8”60.45 cm 6.6”16.76 cm 13”33.02 cm 6.6”16.76 cm 3.3”8.38 cm Approximate Luminaire Weight: 20 Lbs (9.07 Kg) Approximate Luminaire Weight: 21 Lbs (9.53 Kg) Approximate Luminaire Weight: 21.5 Lbs (9.77 Kg) Approximate Luminaire Weight: 23.36 Lbs (10.6 Kg) Single Twin (2@180) 3/4@90 0.2 / 0.019 0.5 / 0.046 0.5 / 0.046 Single Twin (2@180) 3/4@90 0.3 / 0.028 0.6 / 0.056 0.7 / 0.065 Single 0.51 / 0.047 26.2” 66.55 cm 26.2” 66.55 cm 3.3” 8.4 cm 3.23” 8.2 cm 1.5”3.8 cm 2.0” 5.1 cm 6.5” 16.5 cm 6.5”16.5 cm 6.5” 16.5 cm 8.1” 20.57 cm 13”33 cm 13”33 cm 31.5” 80.01 cm 31.5” 80.01 cm 7.7” 19.56 cm 3.3” 8.4 cm 3.3”8.38 cm 2.1” 5.3 cm 13.4”34.04 cm 2.9”7.4 cm EPA (Ft2/M2) EPA (Ft2/M2) EPA (Ft2/M2) ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 4 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Black, 120V OR 277V Input White - Neutral Sensor Red Connects to Override Input (Orange) Line of DynaDimmer ECF Philips Gardco EcoForm LED standard luminaire providing constant wattage and constant light output when power to the luminaire is energized. ECF-DIM Philips Gardco EcoForm LED luminaire provided with 0-10V dimming for connection to a control system provided by others. ECF-APD Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming. Luminaire is provided with a Philips DynaDimmer module, programmed to go to 50% power, 50% light output two (2) hours prior to night time mid-point and remain at 50% for six (6) hours after night time mid-point. Mid-point is continuously recalculated by the Philips DynaDimmer module based on the average mid-point of the last two full night cycles. Short duration cycles, and power interruptions are ignored and do not affect the determination of mid-point. ECF-APD is available in 120V through 277V input only. ECF-APD Dimming Profile: ECF-MR50 Philips Gardco EcoForm LED luminaire with motion response, providing a 50% power reduction on low and a commensurate reduction in light output. The power and light output reduction is accomplished utilizing the Philips DynaDimmer module, programmed for a constant 50% power. Power supplied by the motion sensor connected to the override line on the DynaDimmer takes the luminaire to high setting, 100% power and light output, when motion is detected. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. ECF-MR50 is available in 120V through 277V input only to the luminaire. Motion sensors require single voltage 120V or 277V input. The Area PIR motion sensor is the WattStopper EW-200-120-W (120V Input - MSA- 120V) or the WattStopper EW-200-277-W (277V Input - MSA-277V.) One motion sensor per pole is required and is ordered separately. Area sensors require single voltage 120V or 277V input. The area motion detector provides coverage equal to up to 6 times the sensor height above ground, 270° from the front-center of the sensor. Area PIR Motion Sensor Coverage Pattern: Motion response requires that the pole include an additional hand hole 15 feet above the pole base, normally oriented 180° to the standard hand hole. For Philips Gardco poles, order the pole with the Motion Sensor Mounting (MSM) option which includes the hand hole and a special hand hole cover plate for the sensor with a 1/2" NPT receptacle centered on the hand hole cover plate into which the motion sensor mounts. Once the motion sensor is connected to the hand hole cover plate, then wiring connections are completed in the pole. The plate (complete with motion sensor attached and wired) is then mounted to the hand hole. If poles are supplied by others, the customer is responsible for providing suitable mounting accommodations for the motion sensor in the pole. ECF-APD-MRO Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming, with Motion Response Override. The ECF-APD-MRO combines the benefits of both automatic profile dimming and motion response, using the Philips DynaDimmer module. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for the ECF-APD. If motion is detected during the time that the luminaire is operating at 50%, the luminaire returns to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. NOTES: ECF-APD-MRO is available in 120V through 277V input only to luminaire. The motion sensor requires either 120V or 277V input to the motion sensor. The ECF-APD-MRO has the same pole requirements and utilizes the same motion sensors as the ECF-MR50. The motion sensor mounts and wires identically as well. The ECF-APD-MRO utilizes the identical dimming profile as shown for the ECF-APD. By combining the benefits of automatic profile dimming and motion response, the ECF-APD-MRO assures maximum energy savings, and insures that adequate light is present if motion is detected. All motion sensors utilized consume 0.0 watts in the off state. Luminaire Configuration Information 100% 100% 50% 50% Power On Mid Point 2 Hours 6 Hours Power Off 90° 9.5ft(3m)25ft(8m)52.5ft(16m) 8ft(2.4m) 90° 1H Height 6H3H Distances are approximate. H= Height Above Ground 270° Front Coverage Additional Hand Hole 15' Above Pole Base (oriented 180° to the standard hand hole) Motion Sensor Cover Plate with 1/2" NPT Coupling (supplied with pole)Wiring in Pole Attach Motion Sensor to Cover Plate coupling, Complete Wiring in Pole and Attach Cover Plate to Hand Hole Mounting to a Philips Gardco Pole ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 5 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires ECF-MRI Luminaires with Motion Response include a LED driver and an integral programmable motion sensor. The motion sensor is set to a constant 50%. When motion is detected, the luminaire goes to 100%. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. Available with 120V or 277V only. Luminaires include a passive infrared (PIR) motion sensor, WattStopper® FSP-211 equipped with an FSP-L3 lens, capable of detecting motion within 20 feet of the sensor, 180° around the luminaire, when placed at a 20 foot mounting height, or mounted on a wall. Available in 120V or 277V input only. Motion sensor off state power is 0.0 watts. The approximate motion sensor coverage pattern is as shown below. ECF-APD- MRI Luminaires with Automatic Profile Dimming and Motion Response Override combine the benefits of both automatic profile dimming and motion response. APD-MRI luminaires utilize Philips DynaDimmer. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for APD luminaires (see page 4). If motion is detected during the time that the luminaire is operating at 50%, the luminaire goes to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. APD-MRI luminaires are available with 120V or 277V input voltages only. APD-MRI luminaires use the identical motion sensor as MRI luminaires. See motion sensor details for ECF-MRI. FS1R-100 Wireless Remote Programming Tool The FS1R-100 Remote Programming Tool accessory permits adjustment of ECF-MRI and ECF-APD-MRI sensor settings, including duration and dimming level on low, without the need to connect any wires to the luminaire. The FS1R-100 Wireless IR Programming Tool is a handheld tool for setup and testing of WattStopper FSP-211. It provides wireless access to the FSP-211 sensors for setup and parameter changes. The FS1R-100 display shows menus and prompts to lead you through each process. The navigation pad provides a familiar way to navigate through the customization fields. Within a certain mounting height of the sensor, the FS1R-100 allows modification of the system without requiring ladders or tools simply with a touch of a few buttons. The FS1R-100 IR transceiver allows bi-directional communication between the FSP-211 and the FS1R-100 programming tool . Simple menu screens let you see the current status of the system and make changes. It can change FSP-211 sensor parameters such as high/low mode, sensitivity, time delay, cut off and more. With the FS1R-100 you can also establish and store FSP-211 parameter profiles. The FS1R-100 operates on three standard 1.5V AAA Alkaline batteries or three rechargeable AAA NiMH batteries. The battery status displays in the upper right corner of the display. Three bars next to BAT= indicates a full battery charge. A warning appears on the display when the battery level falls below a minimum acceptable level. To conserve battery power, the FS1R-100 automatically shuts off 10 minutes after the last key press. You navigate from one field to another using (up) or (down) arrow keys. The active field is indicated by flashing (alternates between yellow text on black background and black text on yellow background.) Once active, use the Select button to move to a menu or function within the active field. Value fields are used to adjust parameter settings. They are shown in “less- than/greater-than” symbols: <value>. Once active, change them using (left) and (right) arrow keys. In general the up key increments and the down key decrements a value. Selections wrap-around if you continue to press the key beyond maximum or minimum values. Moving away from the value field overwrites the original value. The Home button takes you to the main menu. The Back button can be thought of as an undo function. It takes you back one screen. Changes that were in process prior to pressing the key are lost.More information on the FS1R-100 Remote Programming Tool is available at wattstopper.com. Luminaire Configuration Information (Continued) Top Coverage PatternSide Coverage Pattern 1H 2H 2H Distances are approximate. H = Height above ground. FSP-201FSP-211FD-101FD-301 Home/Main Menu Up Select Down Right/NextLeft Back Power On/Off BAT= ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 6 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires General Description The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. Integral control systems including motion response are available for further energy savings during off peak hours. Housing One piece die cast aluminum housing with integral arm and separate,self retained hinged, one piece die cast door frame. IP Rating LED light engine rated IP66. Vibration Resistance EcoForm with Standard Arm carries a 3G vibration rating that conforms to standards set forth by ANSI C136.31. Testing includes vibration to 3G acceleration in three axes, all performed on the same luminaire. Electrical Driver efficiency (>90% standard). 120-480V available (restrictions apply). Open/short circuit protection. Optional 0-10V dimming to 10% power. RoHS compliant. Surge protector standard. 10KA per ANSI/ IEEE C62.41.2. LED Board and Array 32, 48, or 64 LEDs. Color temperatures: 3000K, 4000K, 5700K +/- 250K. Minimum CRI of 70. Aluminum metal clad board. RoHS compliant. Energy Saving Benefits System efficacy up to 95 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods. Motion Sensors ECF-MR50, ECF-APD-MRO, ECF-MRI, ECF-APD- MRI luminaires may be specified for additional energy savings during unoccupied periods. See pages 4-6 for complete details. LED Thermal Management The housing design allows the one piece housing to provide excellent thermal management critical to long LED system life. Optical Systems Type 2, 3, 4, and 5 distributions available. Internal Shield option mounts to LED optics and is available with Type 2, 3, and 4 distributions to control backlight. Mounting Standard luminaire arm mounts to 4" round poles. Square pole adapter included with every luminaire. Round Pole Adapter (RPA) required for 3-3.9" poles. Retrofit Arm Mount EcoForm features an innovative retrofit arm kit. When specified with the retrofit arm (RAM) option, EcoForm seamlessly simplifies site conversions to LED by eliminating the need for additional pole drilling on most existing poles. RAM will be boxed separately. Listings ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations. Suitable for use in ambients from -30° to 40°C (-22° to 104°F). The quality systems of this facility have been registered by UL to the ISO 9001 series standards. All EcoForm luminaires equipped with NW and CW are DesignLights Consortium® qualified. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BRP), black (BLP), white (WP), and natural aluminum (NP). Consult factory for specs on optional or custom colors. Warranty EcoForm luminaires feature a 5 year limited warranty. Philips Gardco LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. LED Drivers also carry a 5 year limited warranty. Motion sensors are covered by warranty for 5 years by the motion sensor manufacturer. Specifications 5.1875” 13.18 cm 2.375”6.03 cm26. LED Performance: PREDICTED LUMEN DEPRECIATION DATA13 Ambient Temperature °C Driver mA Calculated L70 Hours13,14 L70 Per TM-2114,15 Lumen Maintenance % @ 60,000 hours Up to 40 °C Up to 1050 mA > 350,000 Hours > 60,000 Hours 97% 13. Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. 14. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. 15. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours. ECOFORM OUTDOOR SITE & AREA PHILIPS GARDCO, LED SITE & AREA LUMINAIRE, ECOFORM The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. EcoForm features an innovative retrofit arm kit, simplifying site conversions to LED by eliminating the need to drill additional holes in most existing poles. Integral control systems available for further energy savings. Redefining value with outstanding performance Project: Location: Catalog No: Fixture Type: Mfg: Qty: Notes: G200-047 08/13 page 1 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Ordering guide Prefix Mounting Optics LED Array & LED Wattage LED Selection Voltage Finish Options ECF EcoForm Standard Luminaire ECF-DIM EcoForm with 0-10V Dimming ECF-APD1 EcoForm with Auto Profile Dimming ECF-MR502 EcoForm with Motion Response at 50% low Pole mounted sensor ECF-APD-MRO2 EcoForm with Auto Profile Dimming and Motion Response Override Pole mounted sensor ECF-MRI2,4 EcoForm with Motion Response at 50% low Luminaire mounted sensor ECF-APD-MRI2,4 EcoForm with Auto Profile Dimming with Motion Response Override Luminaire mounted sensor 1 Single 2 2@180 2@90 2@90 3 3@90 3@120 3@120 4 4@90 WS Wall mount including Surface conduit Rear entry permitted MA Mast Arm Fitter (requires 2-3/8" O.D. Mast Arm) 2 Type 2 3 Type 3 4 Type 4 5 Type 5 530 mA 55LA-32531 75LA-4853 100LA-6453 700mA 70LA-3270 105LA-4870 135LA-6470 1050mA 105LA-321A1 160LA-481A 215LA-641A CW 5,700K 70 CRI NW 4,000K 70 CRI WW3 3,000K 70 CRI UNV 120-277V HVU 347-480V 120 208 240 277 347 480 BRP Bronze Paint BLP Black Paint WP White Paint NP Natural Paint OC Optional Color Specify optional color or RAL ex: OC-LGP or OC-RAL7024. SC Special Color Specify. Must supply color chip. Requires factory quote. TL Tool-Less entry & driver removal hardware TB4 Terminal Block IS5 Internal Shield LF6,10 Line Fusing LFC6,10 Line Fusing for Canada PCR Photocell Receptacle Only PC6,7,10 Receptacle with Photocell PCB6,7,10 Photocell Button RAM Retrofit Arm Mount Kit PTF28 Pole Top Fitter for 2-3/8"-3" Tenon PTF38 Pole Top Fitter for 3"-3.5" Tenon PTF48 Pole Top Fitter for 3.5"-4" Tenon RPA9 Round Pole Adaptor for 3" to 3.9" OD BD Bird Deterrant (field installed only) 1. Available in 120V thru 277V only. 4. ECF-MRI requires outboarded sensor 6. Voltage must be specified. 9. No adaptor required for 4" round poles. 2. Available in 120V or 277V only. when used with Terminal Block (TB) option. 7. Not available in 480V. RPAs provided with Black Paint standard. 3. Contact factory for lead times on warm white. 5. Not available with Type 5 optics. 8. Not available in 3 @ 120. 10. Not available with UNV (120-277V). ® ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 2 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires LED Wattage and Lumen Values - Standard EcoForm Luminaire EcoForm Drill Template (Standard Arm Mount) Initial Lumens12 Order Code (standard units) Array Quantity Total LEDs LED Current (mA) Average System Watts11 LED Selection 2 Type 2 3 Type 3 4 Type 4 5 Type 5 55LA-3253 232530 52 NW5,994 (s)5,895 (s)5,823 (s)5,588 (s) 75LA-4853 348530 77NW8,899 (s)8,753 (s)8,646 (s)8,297 (s) 100LA-6453 464530 103NW11,896 (s)11,700 11,558 11,091 70LA-3270 232700 69 NW7,385 (s)7,576 (s)7,293 (s)7,068 (s) 105LA-4870 348700 104NW10,965 (s)11,249 (s)10,828 (s)10,494 (s) 135LA-6470 464700 139NW14,657 (s)15,037 14,475 (s)14,028 105LA-321A 2321050107NW10,199 (s)10,458 10,072 (s)9,767 160LA-481A 3481050158NW15,144 (s)15,565 14,955 (s)14,465 215LA-641A 4 64 1050 211 NW 20,243 20,252 19,991 19,880 11. System input wattage may vary based on input voltage, by up to +/- 10% , and based on manufacturer forward voltage, by up to +/- 8%. 12. Lumen values based on photometric tests performed in compliance with IESNA LM-79. (s). Data is scaled based on tests of similar, but not identical, luminaires. Accessories (Order Separately) FS1R-100 MR hand held programmer (For use with 'MRI' motion response when field programming is required). If desired, only one is needed per job. MS-A-120V 120V input - Motion Sensor for MR50 or APD-MRO MS-A-277V 277V input - Motion Sensor for MR50 or APD-MRO 1.00” 2.54 cm 2.50” 6.35 cm 2.0” 5.08 cm Ø 0.41” 1.04 cm Ø 0.875” 2.22 cm Note: For reference only. Drawing not to scale. ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 3 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Dimensions - Standard EcoForm Luminaire Dimensions - EcoForm with Mast Arm Fitter (MA) Dimensions - EcoForm with Wall Mount (WS) Dimensions - EcoForm with Retrofit Arm Mount (RAM) 13”33 cm 3.3”8.38 cm 2.1” 5.3 cm 1.3”3.3 cm 24.2”61.47 cm 2.5”6.35 cm 24.2” 61.47 cm 6.1”15.5 cm Top View Top View Top View Top View Side View Side View Side View Side View End View End View End View End View 2.2” 5.58 cm 26”66.04 cm 23.8”60.45 cm 6.6”16.76 cm 13”33.02 cm 6.6”16.76 cm 3.3”8.38 cm Approximate Luminaire Weight: 20 Lbs (9.07 Kg) Approximate Luminaire Weight: 21 Lbs (9.53 Kg) Approximate Luminaire Weight: 21.5 Lbs (9.77 Kg) Approximate Luminaire Weight: 23.36 Lbs (10.6 Kg) Single Twin (2@180) 3/4@90 0.2 / 0.019 0.5 / 0.046 0.5 / 0.046 Single Twin (2@180) 3/4@90 0.3 / 0.028 0.6 / 0.056 0.7 / 0.065 Single 0.51 / 0.047 26.2” 66.55 cm 26.2” 66.55 cm 3.3” 8.4 cm 3.23” 8.2 cm 1.5”3.8 cm 2.0” 5.1 cm 6.5” 16.5 cm 6.5”16.5 cm 6.5” 16.5 cm 8.1” 20.57 cm 13”33 cm 13”33 cm 31.5” 80.01 cm 31.5” 80.01 cm 7.7” 19.56 cm 3.3” 8.4 cm 3.3”8.38 cm 2.1” 5.3 cm 13.4”34.04 cm 2.9”7.4 cm EPA (Ft2/M2) EPA (Ft2/M2) EPA (Ft2/M2) ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 4 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Black, 120V OR 277V Input White - Neutral Sensor Red Connects to Override Input (Orange) Line of DynaDimmer ECF Philips Gardco EcoForm LED standard luminaire providing constant wattage and constant light output when power to the luminaire is energized. ECF-DIM Philips Gardco EcoForm LED luminaire provided with 0-10V dimming for connection to a control system provided by others. ECF-APD Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming. Luminaire is provided with a Philips DynaDimmer module, programmed to go to 50% power, 50% light output two (2) hours prior to night time mid-point and remain at 50% for six (6) hours after night time mid-point. Mid-point is continuously recalculated by the Philips DynaDimmer module based on the average mid-point of the last two full night cycles. Short duration cycles, and power interruptions are ignored and do not affect the determination of mid-point. ECF-APD is available in 120V through 277V input only. ECF-APD Dimming Profile: ECF-MR50 Philips Gardco EcoForm LED luminaire with motion response, providing a 50% power reduction on low and a commensurate reduction in light output. The power and light output reduction is accomplished utilizing the Philips DynaDimmer module, programmed for a constant 50% power. Power supplied by the motion sensor connected to the override line on the DynaDimmer takes the luminaire to high setting, 100% power and light output, when motion is detected. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. ECF-MR50 is available in 120V through 277V input only to the luminaire. Motion sensors require single voltage 120V or 277V input. The Area PIR motion sensor is the WattStopper EW-200-120-W (120V Input - MSA- 120V) or the WattStopper EW-200-277-W (277V Input - MSA-277V.) One motion sensor per pole is required and is ordered separately. Area sensors require single voltage 120V or 277V input. The area motion detector provides coverage equal to up to 6 times the sensor height above ground, 270° from the front-center of the sensor. Area PIR Motion Sensor Coverage Pattern: Motion response requires that the pole include an additional hand hole 15 feet above the pole base, normally oriented 180° to the standard hand hole. For Philips Gardco poles, order the pole with the Motion Sensor Mounting (MSM) option which includes the hand hole and a special hand hole cover plate for the sensor with a 1/2" NPT receptacle centered on the hand hole cover plate into which the motion sensor mounts. Once the motion sensor is connected to the hand hole cover plate, then wiring connections are completed in the pole. The plate (complete with motion sensor attached and wired) is then mounted to the hand hole. If poles are supplied by others, the customer is responsible for providing suitable mounting accommodations for the motion sensor in the pole. ECF-APD-MRO Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming, with Motion Response Override. The ECF-APD-MRO combines the benefits of both automatic profile dimming and motion response, using the Philips DynaDimmer module. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for the ECF-APD. If motion is detected during the time that the luminaire is operating at 50%, the luminaire returns to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. NOTES: ECF-APD-MRO is available in 120V through 277V input only to luminaire. The motion sensor requires either 120V or 277V input to the motion sensor. The ECF-APD-MRO has the same pole requirements and utilizes the same motion sensors as the ECF-MR50. The motion sensor mounts and wires identically as well. The ECF-APD-MRO utilizes the identical dimming profile as shown for the ECF-APD. By combining the benefits of automatic profile dimming and motion response, the ECF-APD-MRO assures maximum energy savings, and insures that adequate light is present if motion is detected. All motion sensors utilized consume 0.0 watts in the off state. Luminaire Configuration Information 100% 100% 50% 50% Power On Mid Point 2 Hours 6 Hours Power Off 90° 9.5ft(3m)25ft(8m)52.5ft(16m) 8ft(2.4m) 90° 1H Height 6H3H Distances are approximate. H= Height Above Ground 270° Front Coverage Additional Hand Hole 15' Above Pole Base (oriented 180° to the standard hand hole) Motion Sensor Cover Plate with 1/2" NPT Coupling (supplied with pole)Wiring in Pole Attach Motion Sensor to Cover Plate coupling, Complete Wiring in Pole and Attach Cover Plate to Hand Hole Mounting to a Philips Gardco Pole ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 5 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires ECF-MRI Luminaires with Motion Response include a LED driver and an integral programmable motion sensor. The motion sensor is set to a constant 50%. When motion is detected, the luminaire goes to 100%. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. Available with 120V or 277V only. Luminaires include a passive infrared (PIR) motion sensor, WattStopper® FSP-211 equipped with an FSP-L3 lens, capable of detecting motion within 20 feet of the sensor, 180° around the luminaire, when placed at a 20 foot mounting height, or mounted on a wall. Available in 120V or 277V input only. Motion sensor off state power is 0.0 watts. The approximate motion sensor coverage pattern is as shown below. ECF-APD- MRI Luminaires with Automatic Profile Dimming and Motion Response Override combine the benefits of both automatic profile dimming and motion response. APD-MRI luminaires utilize Philips DynaDimmer. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for APD luminaires (see page 4). If motion is detected during the time that the luminaire is operating at 50%, the luminaire goes to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. APD-MRI luminaires are available with 120V or 277V input voltages only. APD-MRI luminaires use the identical motion sensor as MRI luminaires. See motion sensor details for ECF-MRI. FS1R-100 Wireless Remote Programming Tool The FS1R-100 Remote Programming Tool accessory permits adjustment of ECF-MRI and ECF-APD-MRI sensor settings, including duration and dimming level on low, without the need to connect any wires to the luminaire. The FS1R-100 Wireless IR Programming Tool is a handheld tool for setup and testing of WattStopper FSP-211. It provides wireless access to the FSP-211 sensors for setup and parameter changes. The FS1R-100 display shows menus and prompts to lead you through each process. The navigation pad provides a familiar way to navigate through the customization fields. Within a certain mounting height of the sensor, the FS1R-100 allows modification of the system without requiring ladders or tools simply with a touch of a few buttons. The FS1R-100 IR transceiver allows bi-directional communication between the FSP-211 and the FS1R-100 programming tool . Simple menu screens let you see the current status of the system and make changes. It can change FSP-211 sensor parameters such as high/low mode, sensitivity, time delay, cut off and more. With the FS1R-100 you can also establish and store FSP-211 parameter profiles. The FS1R-100 operates on three standard 1.5V AAA Alkaline batteries or three rechargeable AAA NiMH batteries. The battery status displays in the upper right corner of the display. Three bars next to BAT= indicates a full battery charge. A warning appears on the display when the battery level falls below a minimum acceptable level. To conserve battery power, the FS1R-100 automatically shuts off 10 minutes after the last key press. You navigate from one field to another using (up) or (down) arrow keys. The active field is indicated by flashing (alternates between yellow text on black background and black text on yellow background.) Once active, use the Select button to move to a menu or function within the active field. Value fields are used to adjust parameter settings. They are shown in “less- than/greater-than” symbols: <value>. Once active, change them using (left) and (right) arrow keys. In general the up key increments and the down key decrements a value. Selections wrap-around if you continue to press the key beyond maximum or minimum values. Moving away from the value field overwrites the original value. The Home button takes you to the main menu. The Back button can be thought of as an undo function. It takes you back one screen. Changes that were in process prior to pressing the key are lost.More information on the FS1R-100 Remote Programming Tool is available at wattstopper.com. Luminaire Configuration Information (Continued) Top Coverage PatternSide Coverage Pattern 1H 2H 2H Distances are approximate. H = Height above ground. FSP-201FSP-211FD-101FD-301 Home/Main Menu Up Select Down Right/NextLeft Back Power On/Off BAT= ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 6 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires General Description The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. Integral control systems including motion response are available for further energy savings during off peak hours. Housing One piece die cast aluminum housing with integral arm and separate,self retained hinged, one piece die cast door frame. IP Rating LED light engine rated IP66. Vibration Resistance EcoForm with Standard Arm carries a 3G vibration rating that conforms to standards set forth by ANSI C136.31. Testing includes vibration to 3G acceleration in three axes, all performed on the same luminaire. Electrical Driver efficiency (>90% standard). 120-480V available (restrictions apply). Open/short circuit protection. Optional 0-10V dimming to 10% power. RoHS compliant. Surge protector standard. 10KA per ANSI/ IEEE C62.41.2. LED Board and Array 32, 48, or 64 LEDs. Color temperatures: 3000K, 4000K, 5700K +/- 250K. Minimum CRI of 70. Aluminum metal clad board. RoHS compliant. Energy Saving Benefits System efficacy up to 95 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods. Motion Sensors ECF-MR50, ECF-APD-MRO, ECF-MRI, ECF-APD- MRI luminaires may be specified for additional energy savings during unoccupied periods. See pages 4-6 for complete details. LED Thermal Management The housing design allows the one piece housing to provide excellent thermal management critical to long LED system life. Optical Systems Type 2, 3, 4, and 5 distributions available. Internal Shield option mounts to LED optics and is available with Type 2, 3, and 4 distributions to control backlight. Mounting Standard luminaire arm mounts to 4" round poles. Square pole adapter included with every luminaire. Round Pole Adapter (RPA) required for 3-3.9" poles. Retrofit Arm Mount EcoForm features an innovative retrofit arm kit. When specified with the retrofit arm (RAM) option, EcoForm seamlessly simplifies site conversions to LED by eliminating the need for additional pole drilling on most existing poles. RAM will be boxed separately. Listings ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations. Suitable for use in ambients from -30° to 40°C (-22° to 104°F). The quality systems of this facility have been registered by UL to the ISO 9001 series standards. All EcoForm luminaires equipped with NW and CW are DesignLights Consortium® qualified. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BRP), black (BLP), white (WP), and natural aluminum (NP). Consult factory for specs on optional or custom colors. Warranty EcoForm luminaires feature a 5 year limited warranty. Philips Gardco LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. LED Drivers also carry a 5 year limited warranty. Motion sensors are covered by warranty for 5 years by the motion sensor manufacturer. Specifications 5.1875” 13.18 cm 2.375”6.03 cm26. LED Performance: PREDICTED LUMEN DEPRECIATION DATA13 Ambient Temperature °C Driver mA Calculated L70 Hours13,14 L70 Per TM-2114,15 Lumen Maintenance % @ 60,000 hours Up to 40 °C Up to 1050 mA > 350,000 Hours > 60,000 Hours 97% 13. Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. 14. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. 15. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours. ECOFORM OUTDOOR SITE & AREA PHILIPS GARDCO, LED SITE & AREA LUMINAIRE, ECOFORM The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. EcoForm features an innovative retrofit arm kit, simplifying site conversions to LED by eliminating the need to drill additional holes in most existing poles. Integral control systems available for further energy savings. Redefining value with outstanding performance Project: Location: Catalog No: Fixture Type: Mfg: Qty: Notes: G200-047 08/13 page 1 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Ordering guide Prefix Mounting Optics LED Array & LED Wattage LED Selection Voltage Finish Options ECF EcoForm Standard Luminaire ECF-DIM EcoForm with 0-10V Dimming ECF-APD1 EcoForm with Auto Profile Dimming ECF-MR502 EcoForm with Motion Response at 50% low Pole mounted sensor ECF-APD-MRO2 EcoForm with Auto Profile Dimming and Motion Response Override Pole mounted sensor ECF-MRI2,4 EcoForm with Motion Response at 50% low Luminaire mounted sensor ECF-APD-MRI2,4 EcoForm with Auto Profile Dimming with Motion Response Override Luminaire mounted sensor 1 Single 2 2@180 2@90 2@90 3 3@90 3@120 3@120 4 4@90 WS Wall mount including Surface conduit Rear entry permitted MA Mast Arm Fitter (requires 2-3/8" O.D. Mast Arm) 2 Type 2 3 Type 3 4 Type 4 5 Type 5 530 mA 55LA-32531 75LA-4853 100LA-6453 700mA 70LA-3270 105LA-4870 135LA-6470 1050mA 105LA-321A1 160LA-481A 215LA-641A CW 5,700K 70 CRI NW 4,000K 70 CRI WW3 3,000K 70 CRI UNV 120-277V HVU 347-480V 120 208 240 277 347 480 BRP Bronze Paint BLP Black Paint WP White Paint NP Natural Paint OC Optional Color Specify optional color or RAL ex: OC-LGP or OC-RAL7024. SC Special Color Specify. Must supply color chip. Requires factory quote. TL Tool-Less entry & driver removal hardware TB4 Terminal Block IS5 Internal Shield LF6,10 Line Fusing LFC6,10 Line Fusing for Canada PCR Photocell Receptacle Only PC6,7,10 Receptacle with Photocell PCB6,7,10 Photocell Button RAM Retrofit Arm Mount Kit PTF28 Pole Top Fitter for 2-3/8"-3" Tenon PTF38 Pole Top Fitter for 3"-3.5" Tenon PTF48 Pole Top Fitter for 3.5"-4" Tenon RPA9 Round Pole Adaptor for 3" to 3.9" OD BD Bird Deterrant (field installed only) 1. Available in 120V thru 277V only. 4. ECF-MRI requires outboarded sensor 6. Voltage must be specified. 9. No adaptor required for 4" round poles. 2. Available in 120V or 277V only. when used with Terminal Block (TB) option. 7. Not available in 480V. RPAs provided with Black Paint standard. 3. Contact factory for lead times on warm white. 5. Not available with Type 5 optics. 8. Not available in 3 @ 120. 10. Not available with UNV (120-277V). ® ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 2 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires LED Wattage and Lumen Values - Standard EcoForm Luminaire EcoForm Drill Template (Standard Arm Mount) Initial Lumens12 Order Code (standard units) Array Quantity Total LEDs LED Current (mA) Average System Watts11 LED Selection 2 Type 2 3 Type 3 4 Type 4 5 Type 5 55LA-3253 232530 52 NW5,994 (s)5,895 (s)5,823 (s)5,588 (s) 75LA-4853 348530 77NW8,899 (s)8,753 (s)8,646 (s)8,297 (s) 100LA-6453 464530 103NW11,896 (s)11,700 11,558 11,091 70LA-3270 232700 69 NW7,385 (s)7,576 (s)7,293 (s)7,068 (s) 105LA-4870 348700 104NW10,965 (s)11,249 (s)10,828 (s)10,494 (s) 135LA-6470 464700 139NW14,657 (s)15,037 14,475 (s)14,028 105LA-321A 2321050107NW10,199 (s)10,458 10,072 (s)9,767 160LA-481A 3481050158NW15,144 (s)15,565 14,955 (s)14,465 215LA-641A 4 64 1050 211 NW 20,243 20,252 19,991 19,880 11. System input wattage may vary based on input voltage, by up to +/- 10% , and based on manufacturer forward voltage, by up to +/- 8%. 12. Lumen values based on photometric tests performed in compliance with IESNA LM-79. (s). Data is scaled based on tests of similar, but not identical, luminaires. Accessories (Order Separately) FS1R-100 MR hand held programmer (For use with 'MRI' motion response when field programming is required). If desired, only one is needed per job. MS-A-120V 120V input - Motion Sensor for MR50 or APD-MRO MS-A-277V 277V input - Motion Sensor for MR50 or APD-MRO 1.00” 2.54 cm 2.50” 6.35 cm 2.0” 5.08 cm Ø 0.41” 1.04 cm Ø 0.875” 2.22 cm Note: For reference only. Drawing not to scale. ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 3 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Dimensions - Standard EcoForm Luminaire Dimensions - EcoForm with Mast Arm Fitter (MA) Dimensions - EcoForm with Wall Mount (WS) Dimensions - EcoForm with Retrofit Arm Mount (RAM) 13”33 cm 3.3”8.38 cm 2.1” 5.3 cm 1.3”3.3 cm 24.2”61.47 cm 2.5”6.35 cm 24.2” 61.47 cm 6.1”15.5 cm Top View Top View Top View Top View Side View Side View Side View Side View End View End View End View End View 2.2” 5.58 cm 26”66.04 cm 23.8”60.45 cm 6.6”16.76 cm 13”33.02 cm 6.6”16.76 cm 3.3”8.38 cm Approximate Luminaire Weight: 20 Lbs (9.07 Kg) Approximate Luminaire Weight: 21 Lbs (9.53 Kg) Approximate Luminaire Weight: 21.5 Lbs (9.77 Kg) Approximate Luminaire Weight: 23.36 Lbs (10.6 Kg) Single Twin (2@180) 3/4@90 0.2 / 0.019 0.5 / 0.046 0.5 / 0.046 Single Twin (2@180) 3/4@90 0.3 / 0.028 0.6 / 0.056 0.7 / 0.065 Single 0.51 / 0.047 26.2” 66.55 cm 26.2” 66.55 cm 3.3” 8.4 cm 3.23” 8.2 cm 1.5”3.8 cm 2.0” 5.1 cm 6.5” 16.5 cm 6.5”16.5 cm 6.5” 16.5 cm 8.1” 20.57 cm 13”33 cm 13”33 cm 31.5” 80.01 cm 31.5” 80.01 cm 7.7” 19.56 cm 3.3” 8.4 cm 3.3”8.38 cm 2.1” 5.3 cm 13.4”34.04 cm 2.9”7.4 cm EPA (Ft2/M2) EPA (Ft2/M2) EPA (Ft2/M2) ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 4 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Black, 120V OR 277V Input White - Neutral Sensor Red Connects to Override Input (Orange) Line of DynaDimmer ECF Philips Gardco EcoForm LED standard luminaire providing constant wattage and constant light output when power to the luminaire is energized. ECF-DIM Philips Gardco EcoForm LED luminaire provided with 0-10V dimming for connection to a control system provided by others. ECF-APD Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming. Luminaire is provided with a Philips DynaDimmer module, programmed to go to 50% power, 50% light output two (2) hours prior to night time mid-point and remain at 50% for six (6) hours after night time mid-point. Mid-point is continuously recalculated by the Philips DynaDimmer module based on the average mid-point of the last two full night cycles. Short duration cycles, and power interruptions are ignored and do not affect the determination of mid-point. ECF-APD is available in 120V through 277V input only. ECF-APD Dimming Profile: ECF-MR50 Philips Gardco EcoForm LED luminaire with motion response, providing a 50% power reduction on low and a commensurate reduction in light output. The power and light output reduction is accomplished utilizing the Philips DynaDimmer module, programmed for a constant 50% power. Power supplied by the motion sensor connected to the override line on the DynaDimmer takes the luminaire to high setting, 100% power and light output, when motion is detected. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. ECF-MR50 is available in 120V through 277V input only to the luminaire. Motion sensors require single voltage 120V or 277V input. The Area PIR motion sensor is the WattStopper EW-200-120-W (120V Input - MSA- 120V) or the WattStopper EW-200-277-W (277V Input - MSA-277V.) One motion sensor per pole is required and is ordered separately. Area sensors require single voltage 120V or 277V input. The area motion detector provides coverage equal to up to 6 times the sensor height above ground, 270° from the front-center of the sensor. Area PIR Motion Sensor Coverage Pattern: Motion response requires that the pole include an additional hand hole 15 feet above the pole base, normally oriented 180° to the standard hand hole. For Philips Gardco poles, order the pole with the Motion Sensor Mounting (MSM) option which includes the hand hole and a special hand hole cover plate for the sensor with a 1/2" NPT receptacle centered on the hand hole cover plate into which the motion sensor mounts. Once the motion sensor is connected to the hand hole cover plate, then wiring connections are completed in the pole. The plate (complete with motion sensor attached and wired) is then mounted to the hand hole. If poles are supplied by others, the customer is responsible for providing suitable mounting accommodations for the motion sensor in the pole. ECF-APD-MRO Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming, with Motion Response Override. The ECF-APD-MRO combines the benefits of both automatic profile dimming and motion response, using the Philips DynaDimmer module. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for the ECF-APD. If motion is detected during the time that the luminaire is operating at 50%, the luminaire returns to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. NOTES: ECF-APD-MRO is available in 120V through 277V input only to luminaire. The motion sensor requires either 120V or 277V input to the motion sensor. The ECF-APD-MRO has the same pole requirements and utilizes the same motion sensors as the ECF-MR50. The motion sensor mounts and wires identically as well. The ECF-APD-MRO utilizes the identical dimming profile as shown for the ECF-APD. By combining the benefits of automatic profile dimming and motion response, the ECF-APD-MRO assures maximum energy savings, and insures that adequate light is present if motion is detected. All motion sensors utilized consume 0.0 watts in the off state. Luminaire Configuration Information 100% 100% 50% 50% Power On Mid Point 2 Hours 6 Hours Power Off 90° 9.5ft(3m)25ft(8m)52.5ft(16m) 8ft(2.4m) 90° 1H Height 6H3H Distances are approximate. H= Height Above Ground 270° Front Coverage Additional Hand Hole 15' Above Pole Base (oriented 180° to the standard hand hole) Motion Sensor Cover Plate with 1/2" NPT Coupling (supplied with pole)Wiring in Pole Attach Motion Sensor to Cover Plate coupling, Complete Wiring in Pole and Attach Cover Plate to Hand Hole Mounting to a Philips Gardco Pole ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 5 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires ECF-MRI Luminaires with Motion Response include a LED driver and an integral programmable motion sensor. The motion sensor is set to a constant 50%. When motion is detected, the luminaire goes to 100%. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. Available with 120V or 277V only. Luminaires include a passive infrared (PIR) motion sensor, WattStopper® FSP-211 equipped with an FSP-L3 lens, capable of detecting motion within 20 feet of the sensor, 180° around the luminaire, when placed at a 20 foot mounting height, or mounted on a wall. Available in 120V or 277V input only. Motion sensor off state power is 0.0 watts. The approximate motion sensor coverage pattern is as shown below. ECF-APD- MRI Luminaires with Automatic Profile Dimming and Motion Response Override combine the benefits of both automatic profile dimming and motion response. APD-MRI luminaires utilize Philips DynaDimmer. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for APD luminaires (see page 4). If motion is detected during the time that the luminaire is operating at 50%, the luminaire goes to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. APD-MRI luminaires are available with 120V or 277V input voltages only. APD-MRI luminaires use the identical motion sensor as MRI luminaires. See motion sensor details for ECF-MRI. FS1R-100 Wireless Remote Programming Tool The FS1R-100 Remote Programming Tool accessory permits adjustment of ECF-MRI and ECF-APD-MRI sensor settings, including duration and dimming level on low, without the need to connect any wires to the luminaire. The FS1R-100 Wireless IR Programming Tool is a handheld tool for setup and testing of WattStopper FSP-211. It provides wireless access to the FSP-211 sensors for setup and parameter changes. The FS1R-100 display shows menus and prompts to lead you through each process. The navigation pad provides a familiar way to navigate through the customization fields. Within a certain mounting height of the sensor, the FS1R-100 allows modification of the system without requiring ladders or tools simply with a touch of a few buttons. The FS1R-100 IR transceiver allows bi-directional communication between the FSP-211 and the FS1R-100 programming tool . Simple menu screens let you see the current status of the system and make changes. It can change FSP-211 sensor parameters such as high/low mode, sensitivity, time delay, cut off and more. With the FS1R-100 you can also establish and store FSP-211 parameter profiles. The FS1R-100 operates on three standard 1.5V AAA Alkaline batteries or three rechargeable AAA NiMH batteries. The battery status displays in the upper right corner of the display. Three bars next to BAT= indicates a full battery charge. A warning appears on the display when the battery level falls below a minimum acceptable level. To conserve battery power, the FS1R-100 automatically shuts off 10 minutes after the last key press. You navigate from one field to another using (up) or (down) arrow keys. The active field is indicated by flashing (alternates between yellow text on black background and black text on yellow background.) Once active, use the Select button to move to a menu or function within the active field. Value fields are used to adjust parameter settings. They are shown in “less- than/greater-than” symbols: <value>. Once active, change them using (left) and (right) arrow keys. In general the up key increments and the down key decrements a value. Selections wrap-around if you continue to press the key beyond maximum or minimum values. Moving away from the value field overwrites the original value. The Home button takes you to the main menu. The Back button can be thought of as an undo function. It takes you back one screen. Changes that were in process prior to pressing the key are lost.More information on the FS1R-100 Remote Programming Tool is available at wattstopper.com. Luminaire Configuration Information (Continued) Top Coverage PatternSide Coverage Pattern 1H 2H 2H Distances are approximate. H = Height above ground. FSP-201FSP-211FD-101FD-301 Home/Main Menu Up Select Down Right/NextLeft Back Power On/Off BAT= ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 6 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires General Description The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. Integral control systems including motion response are available for further energy savings during off peak hours. Housing One piece die cast aluminum housing with integral arm and separate,self retained hinged, one piece die cast door frame. IP Rating LED light engine rated IP66. Vibration Resistance EcoForm with Standard Arm carries a 3G vibration rating that conforms to standards set forth by ANSI C136.31. Testing includes vibration to 3G acceleration in three axes, all performed on the same luminaire. Electrical Driver efficiency (>90% standard). 120-480V available (restrictions apply). Open/short circuit protection. Optional 0-10V dimming to 10% power. RoHS compliant. Surge protector standard. 10KA per ANSI/ IEEE C62.41.2. LED Board and Array 32, 48, or 64 LEDs. Color temperatures: 3000K, 4000K, 5700K +/- 250K. Minimum CRI of 70. Aluminum metal clad board. RoHS compliant. Energy Saving Benefits System efficacy up to 95 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods. Motion Sensors ECF-MR50, ECF-APD-MRO, ECF-MRI, ECF-APD- MRI luminaires may be specified for additional energy savings during unoccupied periods. See pages 4-6 for complete details. LED Thermal Management The housing design allows the one piece housing to provide excellent thermal management critical to long LED system life. Optical Systems Type 2, 3, 4, and 5 distributions available. Internal Shield option mounts to LED optics and is available with Type 2, 3, and 4 distributions to control backlight. Mounting Standard luminaire arm mounts to 4" round poles. Square pole adapter included with every luminaire. Round Pole Adapter (RPA) required for 3-3.9" poles. Retrofit Arm Mount EcoForm features an innovative retrofit arm kit. When specified with the retrofit arm (RAM) option, EcoForm seamlessly simplifies site conversions to LED by eliminating the need for additional pole drilling on most existing poles. RAM will be boxed separately. Listings ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations. Suitable for use in ambients from -30° to 40°C (-22° to 104°F). The quality systems of this facility have been registered by UL to the ISO 9001 series standards. All EcoForm luminaires equipped with NW and CW are DesignLights Consortium® qualified. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BRP), black (BLP), white (WP), and natural aluminum (NP). Consult factory for specs on optional or custom colors. Warranty EcoForm luminaires feature a 5 year limited warranty. Philips Gardco LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. LED Drivers also carry a 5 year limited warranty. Motion sensors are covered by warranty for 5 years by the motion sensor manufacturer. Specifications 5.1875” 13.18 cm 2.375”6.03 cm26. LED Performance: PREDICTED LUMEN DEPRECIATION DATA13 Ambient Temperature °C Driver mA Calculated L70 Hours13,14 L70 Per TM-2114,15 Lumen Maintenance % @ 60,000 hours Up to 40 °C Up to 1050 mA > 350,000 Hours > 60,000 Hours 97% 13. Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. 14. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. 15. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours. ECOFORM OUTDOOR SITE & AREA PHILIPS GARDCO, LED SITE & AREA LUMINAIRE, ECOFORM The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. EcoForm features an innovative retrofit arm kit, simplifying site conversions to LED by eliminating the need to drill additional holes in most existing poles. Integral control systems available for further energy savings. Redefining value with outstanding performance Project: Location: Catalog No: Fixture Type: Mfg: Qty: Notes: G200-047 08/13 page 1 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Ordering guide Prefix Mounting Optics LED Array & LED Wattage LED Selection Voltage Finish Options ECF EcoForm Standard Luminaire ECF-DIM EcoForm with 0-10V Dimming ECF-APD1 EcoForm with Auto Profile Dimming ECF-MR502 EcoForm with Motion Response at 50% low Pole mounted sensor ECF-APD-MRO2 EcoForm with Auto Profile Dimming and Motion Response Override Pole mounted sensor ECF-MRI2,4 EcoForm with Motion Response at 50% low Luminaire mounted sensor ECF-APD-MRI2,4 EcoForm with Auto Profile Dimming with Motion Response Override Luminaire mounted sensor 1 Single 2 2@180 2@90 2@90 3 3@90 3@120 3@120 4 4@90 WS Wall mount including Surface conduit Rear entry permitted MA Mast Arm Fitter (requires 2-3/8" O.D. Mast Arm) 2 Type 2 3 Type 3 4 Type 4 5 Type 5 530 mA 55LA-32531 75LA-4853 100LA-6453 700mA 70LA-3270 105LA-4870 135LA-6470 1050mA 105LA-321A1 160LA-481A 215LA-641A CW 5,700K 70 CRI NW 4,000K 70 CRI WW3 3,000K 70 CRI UNV 120-277V HVU 347-480V 120 208 240 277 347 480 BRP Bronze Paint BLP Black Paint WP White Paint NP Natural Paint OC Optional Color Specify optional color or RAL ex: OC-LGP or OC-RAL7024. SC Special Color Specify. Must supply color chip. Requires factory quote. TL Tool-Less entry & driver removal hardware TB4 Terminal Block IS5 Internal Shield LF6,10 Line Fusing LFC6,10 Line Fusing for Canada PCR Photocell Receptacle Only PC6,7,10 Receptacle with Photocell PCB6,7,10 Photocell Button RAM Retrofit Arm Mount Kit PTF28 Pole Top Fitter for 2-3/8"-3" Tenon PTF38 Pole Top Fitter for 3"-3.5" Tenon PTF48 Pole Top Fitter for 3.5"-4" Tenon RPA9 Round Pole Adaptor for 3" to 3.9" OD BD Bird Deterrant (field installed only) 1. Available in 120V thru 277V only. 4. ECF-MRI requires outboarded sensor 6. Voltage must be specified. 9. No adaptor required for 4" round poles. 2. Available in 120V or 277V only. when used with Terminal Block (TB) option. 7. Not available in 480V. RPAs provided with Black Paint standard. 3. Contact factory for lead times on warm white. 5. Not available with Type 5 optics. 8. Not available in 3 @ 120. 10. Not available with UNV (120-277V). ® ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 2 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires LED Wattage and Lumen Values - Standard EcoForm Luminaire EcoForm Drill Template (Standard Arm Mount) Initial Lumens12 Order Code (standard units) Array Quantity Total LEDs LED Current (mA) Average System Watts11 LED Selection 2 Type 2 3 Type 3 4 Type 4 5 Type 5 55LA-3253 232530 52 NW5,994 (s)5,895 (s)5,823 (s)5,588 (s) 75LA-4853 348530 77NW8,899 (s)8,753 (s)8,646 (s)8,297 (s) 100LA-6453 464530 103NW11,896 (s)11,700 11,558 11,091 70LA-3270 232700 69 NW7,385 (s)7,576 (s)7,293 (s)7,068 (s) 105LA-4870 348700 104NW10,965 (s)11,249 (s)10,828 (s)10,494 (s) 135LA-6470 464700 139NW14,657 (s)15,037 14,475 (s)14,028 105LA-321A 2321050107NW10,199 (s)10,458 10,072 (s)9,767 160LA-481A 3481050158NW15,144 (s)15,565 14,955 (s)14,465 215LA-641A 4 64 1050 211 NW 20,243 20,252 19,991 19,880 11. System input wattage may vary based on input voltage, by up to +/- 10% , and based on manufacturer forward voltage, by up to +/- 8%. 12. Lumen values based on photometric tests performed in compliance with IESNA LM-79. (s). Data is scaled based on tests of similar, but not identical, luminaires. Accessories (Order Separately) FS1R-100 MR hand held programmer (For use with 'MRI' motion response when field programming is required). If desired, only one is needed per job. MS-A-120V 120V input - Motion Sensor for MR50 or APD-MRO MS-A-277V 277V input - Motion Sensor for MR50 or APD-MRO 1.00” 2.54 cm 2.50” 6.35 cm 2.0” 5.08 cm Ø 0.41” 1.04 cm Ø 0.875” 2.22 cm Note: For reference only. Drawing not to scale. ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 3 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Dimensions - Standard EcoForm Luminaire Dimensions - EcoForm with Mast Arm Fitter (MA) Dimensions - EcoForm with Wall Mount (WS) Dimensions - EcoForm with Retrofit Arm Mount (RAM) 13”33 cm 3.3”8.38 cm 2.1” 5.3 cm 1.3”3.3 cm 24.2”61.47 cm 2.5”6.35 cm 24.2” 61.47 cm 6.1”15.5 cm Top View Top View Top View Top View Side View Side View Side View Side View End View End View End View End View 2.2” 5.58 cm 26”66.04 cm 23.8”60.45 cm 6.6”16.76 cm 13”33.02 cm 6.6”16.76 cm 3.3”8.38 cm Approximate Luminaire Weight: 20 Lbs (9.07 Kg) Approximate Luminaire Weight: 21 Lbs (9.53 Kg) Approximate Luminaire Weight: 21.5 Lbs (9.77 Kg) Approximate Luminaire Weight: 23.36 Lbs (10.6 Kg) Single Twin (2@180) 3/4@90 0.2 / 0.019 0.5 / 0.046 0.5 / 0.046 Single Twin (2@180) 3/4@90 0.3 / 0.028 0.6 / 0.056 0.7 / 0.065 Single 0.51 / 0.047 26.2” 66.55 cm 26.2” 66.55 cm 3.3” 8.4 cm 3.23” 8.2 cm 1.5”3.8 cm 2.0” 5.1 cm 6.5” 16.5 cm 6.5”16.5 cm 6.5” 16.5 cm 8.1” 20.57 cm 13”33 cm 13”33 cm 31.5” 80.01 cm 31.5” 80.01 cm 7.7” 19.56 cm 3.3” 8.4 cm 3.3”8.38 cm 2.1” 5.3 cm 13.4”34.04 cm 2.9”7.4 cm EPA (Ft2/M2) EPA (Ft2/M2) EPA (Ft2/M2) ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 4 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Black, 120V OR 277V Input White - Neutral Sensor Red Connects to Override Input (Orange) Line of DynaDimmer ECF Philips Gardco EcoForm LED standard luminaire providing constant wattage and constant light output when power to the luminaire is energized. ECF-DIM Philips Gardco EcoForm LED luminaire provided with 0-10V dimming for connection to a control system provided by others. ECF-APD Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming. Luminaire is provided with a Philips DynaDimmer module, programmed to go to 50% power, 50% light output two (2) hours prior to night time mid-point and remain at 50% for six (6) hours after night time mid-point. Mid-point is continuously recalculated by the Philips DynaDimmer module based on the average mid-point of the last two full night cycles. Short duration cycles, and power interruptions are ignored and do not affect the determination of mid-point. ECF-APD is available in 120V through 277V input only. ECF-APD Dimming Profile: ECF-MR50 Philips Gardco EcoForm LED luminaire with motion response, providing a 50% power reduction on low and a commensurate reduction in light output. The power and light output reduction is accomplished utilizing the Philips DynaDimmer module, programmed for a constant 50% power. Power supplied by the motion sensor connected to the override line on the DynaDimmer takes the luminaire to high setting, 100% power and light output, when motion is detected. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. ECF-MR50 is available in 120V through 277V input only to the luminaire. Motion sensors require single voltage 120V or 277V input. The Area PIR motion sensor is the WattStopper EW-200-120-W (120V Input - MSA- 120V) or the WattStopper EW-200-277-W (277V Input - MSA-277V.) One motion sensor per pole is required and is ordered separately. Area sensors require single voltage 120V or 277V input. The area motion detector provides coverage equal to up to 6 times the sensor height above ground, 270° from the front-center of the sensor. Area PIR Motion Sensor Coverage Pattern: Motion response requires that the pole include an additional hand hole 15 feet above the pole base, normally oriented 180° to the standard hand hole. For Philips Gardco poles, order the pole with the Motion Sensor Mounting (MSM) option which includes the hand hole and a special hand hole cover plate for the sensor with a 1/2" NPT receptacle centered on the hand hole cover plate into which the motion sensor mounts. Once the motion sensor is connected to the hand hole cover plate, then wiring connections are completed in the pole. The plate (complete with motion sensor attached and wired) is then mounted to the hand hole. If poles are supplied by others, the customer is responsible for providing suitable mounting accommodations for the motion sensor in the pole. ECF-APD-MRO Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming, with Motion Response Override. The ECF-APD-MRO combines the benefits of both automatic profile dimming and motion response, using the Philips DynaDimmer module. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for the ECF-APD. If motion is detected during the time that the luminaire is operating at 50%, the luminaire returns to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. NOTES: ECF-APD-MRO is available in 120V through 277V input only to luminaire. The motion sensor requires either 120V or 277V input to the motion sensor. The ECF-APD-MRO has the same pole requirements and utilizes the same motion sensors as the ECF-MR50. The motion sensor mounts and wires identically as well. The ECF-APD-MRO utilizes the identical dimming profile as shown for the ECF-APD. By combining the benefits of automatic profile dimming and motion response, the ECF-APD-MRO assures maximum energy savings, and insures that adequate light is present if motion is detected. All motion sensors utilized consume 0.0 watts in the off state. Luminaire Configuration Information 100% 100% 50% 50% Power On Mid Point 2 Hours 6 Hours Power Off 90° 9.5ft(3m)25ft(8m)52.5ft(16m) 8ft(2.4m) 90° 1H Height 6H3H Distances are approximate. H= Height Above Ground 270° Front Coverage Additional Hand Hole 15' Above Pole Base (oriented 180° to the standard hand hole) Motion Sensor Cover Plate with 1/2" NPT Coupling (supplied with pole)Wiring in Pole Attach Motion Sensor to Cover Plate coupling, Complete Wiring in Pole and Attach Cover Plate to Hand Hole Mounting to a Philips Gardco Pole ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 5 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires ECF-MRI Luminaires with Motion Response include a LED driver and an integral programmable motion sensor. The motion sensor is set to a constant 50%. When motion is detected, the luminaire goes to 100%. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. Available with 120V or 277V only. Luminaires include a passive infrared (PIR) motion sensor, WattStopper® FSP-211 equipped with an FSP-L3 lens, capable of detecting motion within 20 feet of the sensor, 180° around the luminaire, when placed at a 20 foot mounting height, or mounted on a wall. Available in 120V or 277V input only. Motion sensor off state power is 0.0 watts. The approximate motion sensor coverage pattern is as shown below. ECF-APD- MRI Luminaires with Automatic Profile Dimming and Motion Response Override combine the benefits of both automatic profile dimming and motion response. APD-MRI luminaires utilize Philips DynaDimmer. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for APD luminaires (see page 4). If motion is detected during the time that the luminaire is operating at 50%, the luminaire goes to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. APD-MRI luminaires are available with 120V or 277V input voltages only. APD-MRI luminaires use the identical motion sensor as MRI luminaires. See motion sensor details for ECF-MRI. FS1R-100 Wireless Remote Programming Tool The FS1R-100 Remote Programming Tool accessory permits adjustment of ECF-MRI and ECF-APD-MRI sensor settings, including duration and dimming level on low, without the need to connect any wires to the luminaire. The FS1R-100 Wireless IR Programming Tool is a handheld tool for setup and testing of WattStopper FSP-211. It provides wireless access to the FSP-211 sensors for setup and parameter changes. The FS1R-100 display shows menus and prompts to lead you through each process. The navigation pad provides a familiar way to navigate through the customization fields. Within a certain mounting height of the sensor, the FS1R-100 allows modification of the system without requiring ladders or tools simply with a touch of a few buttons. The FS1R-100 IR transceiver allows bi-directional communication between the FSP-211 and the FS1R-100 programming tool . Simple menu screens let you see the current status of the system and make changes. It can change FSP-211 sensor parameters such as high/low mode, sensitivity, time delay, cut off and more. With the FS1R-100 you can also establish and store FSP-211 parameter profiles. The FS1R-100 operates on three standard 1.5V AAA Alkaline batteries or three rechargeable AAA NiMH batteries. The battery status displays in the upper right corner of the display. Three bars next to BAT= indicates a full battery charge. A warning appears on the display when the battery level falls below a minimum acceptable level. To conserve battery power, the FS1R-100 automatically shuts off 10 minutes after the last key press. You navigate from one field to another using (up) or (down) arrow keys. The active field is indicated by flashing (alternates between yellow text on black background and black text on yellow background.) Once active, use the Select button to move to a menu or function within the active field. Value fields are used to adjust parameter settings. They are shown in “less- than/greater-than” symbols: <value>. Once active, change them using (left) and (right) arrow keys. In general the up key increments and the down key decrements a value. Selections wrap-around if you continue to press the key beyond maximum or minimum values. Moving away from the value field overwrites the original value. The Home button takes you to the main menu. The Back button can be thought of as an undo function. It takes you back one screen. Changes that were in process prior to pressing the key are lost.More information on the FS1R-100 Remote Programming Tool is available at wattstopper.com. Luminaire Configuration Information (Continued) Top Coverage PatternSide Coverage Pattern 1H 2H 2H Distances are approximate. H = Height above ground. FSP-201FSP-211FD-101FD-301 Home/Main Menu Up Select Down Right/NextLeft Back Power On/Off BAT= ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 6 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires General Description The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. Integral control systems including motion response are available for further energy savings during off peak hours. Housing One piece die cast aluminum housing with integral arm and separate,self retained hinged, one piece die cast door frame. IP Rating LED light engine rated IP66. Vibration Resistance EcoForm with Standard Arm carries a 3G vibration rating that conforms to standards set forth by ANSI C136.31. Testing includes vibration to 3G acceleration in three axes, all performed on the same luminaire. Electrical Driver efficiency (>90% standard). 120-480V available (restrictions apply). Open/short circuit protection. Optional 0-10V dimming to 10% power. RoHS compliant. Surge protector standard. 10KA per ANSI/ IEEE C62.41.2. LED Board and Array 32, 48, or 64 LEDs. Color temperatures: 3000K, 4000K, 5700K +/- 250K. Minimum CRI of 70. Aluminum metal clad board. RoHS compliant. Energy Saving Benefits System efficacy up to 95 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods. Motion Sensors ECF-MR50, ECF-APD-MRO, ECF-MRI, ECF-APD- MRI luminaires may be specified for additional energy savings during unoccupied periods. See pages 4-6 for complete details. LED Thermal Management The housing design allows the one piece housing to provide excellent thermal management critical to long LED system life. Optical Systems Type 2, 3, 4, and 5 distributions available. Internal Shield option mounts to LED optics and is available with Type 2, 3, and 4 distributions to control backlight. Mounting Standard luminaire arm mounts to 4" round poles. Square pole adapter included with every luminaire. Round Pole Adapter (RPA) required for 3-3.9" poles. Retrofit Arm Mount EcoForm features an innovative retrofit arm kit. When specified with the retrofit arm (RAM) option, EcoForm seamlessly simplifies site conversions to LED by eliminating the need for additional pole drilling on most existing poles. RAM will be boxed separately. Listings ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations. Suitable for use in ambients from -30° to 40°C (-22° to 104°F). The quality systems of this facility have been registered by UL to the ISO 9001 series standards. All EcoForm luminaires equipped with NW and CW are DesignLights Consortium® qualified. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BRP), black (BLP), white (WP), and natural aluminum (NP). Consult factory for specs on optional or custom colors. Warranty EcoForm luminaires feature a 5 year limited warranty. Philips Gardco LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. LED Drivers also carry a 5 year limited warranty. Motion sensors are covered by warranty for 5 years by the motion sensor manufacturer. Specifications 5.1875” 13.18 cm 2.375”6.03 cm26. LED Performance: PREDICTED LUMEN DEPRECIATION DATA13 Ambient Temperature °C Driver mA Calculated L70 Hours13,14 L70 Per TM-2114,15 Lumen Maintenance % @ 60,000 hours Up to 40 °C Up to 1050 mA > 350,000 Hours > 60,000 Hours 97% 13. Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. 14. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. 15. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours. ECOFORM OUTDOOR SITE & AREA PHILIPS GARDCO, LED SITE & AREA LUMINAIRE, ECOFORM The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. EcoForm features an innovative retrofit arm kit, simplifying site conversions to LED by eliminating the need to drill additional holes in most existing poles. Integral control systems available for further energy savings. Redefining value with outstanding performance Project: Location: Catalog No: Fixture Type: Mfg: Qty: Notes: G200-047 08/13 page 1 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Ordering guide Prefix Mounting Optics LED Array & LED Wattage LED Selection Voltage Finish Options ECF EcoForm Standard Luminaire ECF-DIM EcoForm with 0-10V Dimming ECF-APD1 EcoForm with Auto Profile Dimming ECF-MR502 EcoForm with Motion Response at 50% low Pole mounted sensor ECF-APD-MRO2 EcoForm with Auto Profile Dimming and Motion Response Override Pole mounted sensor ECF-MRI2,4 EcoForm with Motion Response at 50% low Luminaire mounted sensor ECF-APD-MRI2,4 EcoForm with Auto Profile Dimming with Motion Response Override Luminaire mounted sensor 1 Single 2 2@180 2@90 2@90 3 3@90 3@120 3@120 4 4@90 WS Wall mount including Surface conduit Rear entry permitted MA Mast Arm Fitter (requires 2-3/8" O.D. Mast Arm) 2 Type 2 3 Type 3 4 Type 4 5 Type 5 530 mA 55LA-32531 75LA-4853 100LA-6453 700mA 70LA-3270 105LA-4870 135LA-6470 1050mA 105LA-321A1 160LA-481A 215LA-641A CW 5,700K 70 CRI NW 4,000K 70 CRI WW3 3,000K 70 CRI UNV 120-277V HVU 347-480V 120 208 240 277 347 480 BRP Bronze Paint BLP Black Paint WP White Paint NP Natural Paint OC Optional Color Specify optional color or RAL ex: OC-LGP or OC-RAL7024. SC Special Color Specify. Must supply color chip. Requires factory quote. TL Tool-Less entry & driver removal hardware TB4 Terminal Block IS5 Internal Shield LF6,10 Line Fusing LFC6,10 Line Fusing for Canada PCR Photocell Receptacle Only PC6,7,10 Receptacle with Photocell PCB6,7,10 Photocell Button RAM Retrofit Arm Mount Kit PTF28 Pole Top Fitter for 2-3/8"-3" Tenon PTF38 Pole Top Fitter for 3"-3.5" Tenon PTF48 Pole Top Fitter for 3.5"-4" Tenon RPA9 Round Pole Adaptor for 3" to 3.9" OD BD Bird Deterrant (field installed only) 1. Available in 120V thru 277V only. 4. ECF-MRI requires outboarded sensor 6. Voltage must be specified. 9. No adaptor required for 4" round poles. 2. Available in 120V or 277V only. when used with Terminal Block (TB) option. 7. Not available in 480V. RPAs provided with Black Paint standard. 3. Contact factory for lead times on warm white. 5. Not available with Type 5 optics. 8. Not available in 3 @ 120. 10. Not available with UNV (120-277V). ® ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 2 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires LED Wattage and Lumen Values - Standard EcoForm Luminaire EcoForm Drill Template (Standard Arm Mount) Initial Lumens12 Order Code (standard units) Array Quantity Total LEDs LED Current (mA) Average System Watts11 LED Selection 2 Type 2 3 Type 3 4 Type 4 5 Type 5 55LA-3253 232530 52 NW5,994 (s)5,895 (s)5,823 (s)5,588 (s) 75LA-4853 348530 77NW8,899 (s)8,753 (s)8,646 (s)8,297 (s) 100LA-6453 464530 103NW11,896 (s)11,700 11,558 11,091 70LA-3270 232700 69 NW7,385 (s)7,576 (s)7,293 (s)7,068 (s) 105LA-4870 348700 104NW10,965 (s)11,249 (s)10,828 (s)10,494 (s) 135LA-6470 464700 139NW14,657 (s)15,037 14,475 (s)14,028 105LA-321A 2321050107NW10,199 (s)10,458 10,072 (s)9,767 160LA-481A 3481050158NW15,144 (s)15,565 14,955 (s)14,465 215LA-641A 4 64 1050 211 NW 20,243 20,252 19,991 19,880 11. System input wattage may vary based on input voltage, by up to +/- 10% , and based on manufacturer forward voltage, by up to +/- 8%. 12. Lumen values based on photometric tests performed in compliance with IESNA LM-79. (s). Data is scaled based on tests of similar, but not identical, luminaires. Accessories (Order Separately) FS1R-100 MR hand held programmer (For use with 'MRI' motion response when field programming is required). If desired, only one is needed per job. MS-A-120V 120V input - Motion Sensor for MR50 or APD-MRO MS-A-277V 277V input - Motion Sensor for MR50 or APD-MRO 1.00” 2.54 cm 2.50” 6.35 cm 2.0” 5.08 cm Ø 0.41” 1.04 cm Ø 0.875” 2.22 cm Note: For reference only. Drawing not to scale. ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 3 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Dimensions - Standard EcoForm Luminaire Dimensions - EcoForm with Mast Arm Fitter (MA) Dimensions - EcoForm with Wall Mount (WS) Dimensions - EcoForm with Retrofit Arm Mount (RAM) 13”33 cm 3.3”8.38 cm 2.1” 5.3 cm 1.3”3.3 cm 24.2”61.47 cm 2.5”6.35 cm 24.2” 61.47 cm 6.1”15.5 cm Top View Top View Top View Top View Side View Side View Side View Side View End View End View End View End View 2.2” 5.58 cm 26”66.04 cm 23.8”60.45 cm 6.6”16.76 cm 13”33.02 cm 6.6”16.76 cm 3.3”8.38 cm Approximate Luminaire Weight: 20 Lbs (9.07 Kg) Approximate Luminaire Weight: 21 Lbs (9.53 Kg) Approximate Luminaire Weight: 21.5 Lbs (9.77 Kg) Approximate Luminaire Weight: 23.36 Lbs (10.6 Kg) Single Twin (2@180) 3/4@90 0.2 / 0.019 0.5 / 0.046 0.5 / 0.046 Single Twin (2@180) 3/4@90 0.3 / 0.028 0.6 / 0.056 0.7 / 0.065 Single 0.51 / 0.047 26.2” 66.55 cm 26.2” 66.55 cm 3.3” 8.4 cm 3.23” 8.2 cm 1.5”3.8 cm 2.0” 5.1 cm 6.5” 16.5 cm 6.5”16.5 cm 6.5” 16.5 cm 8.1” 20.57 cm 13”33 cm 13”33 cm 31.5” 80.01 cm 31.5” 80.01 cm 7.7” 19.56 cm 3.3” 8.4 cm 3.3”8.38 cm 2.1” 5.3 cm 13.4”34.04 cm 2.9”7.4 cm EPA (Ft2/M2) EPA (Ft2/M2) EPA (Ft2/M2) ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 4 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Black, 120V OR 277V Input White - Neutral Sensor Red Connects to Override Input (Orange) Line of DynaDimmer ECF Philips Gardco EcoForm LED standard luminaire providing constant wattage and constant light output when power to the luminaire is energized. ECF-DIM Philips Gardco EcoForm LED luminaire provided with 0-10V dimming for connection to a control system provided by others. ECF-APD Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming. Luminaire is provided with a Philips DynaDimmer module, programmed to go to 50% power, 50% light output two (2) hours prior to night time mid-point and remain at 50% for six (6) hours after night time mid-point. Mid-point is continuously recalculated by the Philips DynaDimmer module based on the average mid-point of the last two full night cycles. Short duration cycles, and power interruptions are ignored and do not affect the determination of mid-point. ECF-APD is available in 120V through 277V input only. ECF-APD Dimming Profile: ECF-MR50 Philips Gardco EcoForm LED luminaire with motion response, providing a 50% power reduction on low and a commensurate reduction in light output. The power and light output reduction is accomplished utilizing the Philips DynaDimmer module, programmed for a constant 50% power. Power supplied by the motion sensor connected to the override line on the DynaDimmer takes the luminaire to high setting, 100% power and light output, when motion is detected. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. ECF-MR50 is available in 120V through 277V input only to the luminaire. Motion sensors require single voltage 120V or 277V input. The Area PIR motion sensor is the WattStopper EW-200-120-W (120V Input - MSA- 120V) or the WattStopper EW-200-277-W (277V Input - MSA-277V.) One motion sensor per pole is required and is ordered separately. Area sensors require single voltage 120V or 277V input. The area motion detector provides coverage equal to up to 6 times the sensor height above ground, 270° from the front-center of the sensor. Area PIR Motion Sensor Coverage Pattern: Motion response requires that the pole include an additional hand hole 15 feet above the pole base, normally oriented 180° to the standard hand hole. For Philips Gardco poles, order the pole with the Motion Sensor Mounting (MSM) option which includes the hand hole and a special hand hole cover plate for the sensor with a 1/2" NPT receptacle centered on the hand hole cover plate into which the motion sensor mounts. Once the motion sensor is connected to the hand hole cover plate, then wiring connections are completed in the pole. The plate (complete with motion sensor attached and wired) is then mounted to the hand hole. If poles are supplied by others, the customer is responsible for providing suitable mounting accommodations for the motion sensor in the pole. ECF-APD-MRO Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming, with Motion Response Override. The ECF-APD-MRO combines the benefits of both automatic profile dimming and motion response, using the Philips DynaDimmer module. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for the ECF-APD. If motion is detected during the time that the luminaire is operating at 50%, the luminaire returns to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. NOTES: ECF-APD-MRO is available in 120V through 277V input only to luminaire. The motion sensor requires either 120V or 277V input to the motion sensor. The ECF-APD-MRO has the same pole requirements and utilizes the same motion sensors as the ECF-MR50. The motion sensor mounts and wires identically as well. The ECF-APD-MRO utilizes the identical dimming profile as shown for the ECF-APD. By combining the benefits of automatic profile dimming and motion response, the ECF-APD-MRO assures maximum energy savings, and insures that adequate light is present if motion is detected. All motion sensors utilized consume 0.0 watts in the off state. Luminaire Configuration Information 100% 100% 50% 50% Power On Mid Point 2 Hours 6 Hours Power Off 90° 9.5ft(3m)25ft(8m)52.5ft(16m) 8ft(2.4m) 90° 1H Height 6H3H Distances are approximate. H= Height Above Ground 270° Front Coverage Additional Hand Hole 15' Above Pole Base (oriented 180° to the standard hand hole) Motion Sensor Cover Plate with 1/2" NPT Coupling (supplied with pole)Wiring in Pole Attach Motion Sensor to Cover Plate coupling, Complete Wiring in Pole and Attach Cover Plate to Hand Hole Mounting to a Philips Gardco Pole ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 5 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires ECF-MRI Luminaires with Motion Response include a LED driver and an integral programmable motion sensor. The motion sensor is set to a constant 50%. When motion is detected, the luminaire goes to 100%. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. Available with 120V or 277V only. Luminaires include a passive infrared (PIR) motion sensor, WattStopper® FSP-211 equipped with an FSP-L3 lens, capable of detecting motion within 20 feet of the sensor, 180° around the luminaire, when placed at a 20 foot mounting height, or mounted on a wall. Available in 120V or 277V input only. Motion sensor off state power is 0.0 watts. The approximate motion sensor coverage pattern is as shown below. ECF-APD- MRI Luminaires with Automatic Profile Dimming and Motion Response Override combine the benefits of both automatic profile dimming and motion response. APD-MRI luminaires utilize Philips DynaDimmer. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for APD luminaires (see page 4). If motion is detected during the time that the luminaire is operating at 50%, the luminaire goes to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. APD-MRI luminaires are available with 120V or 277V input voltages only. APD-MRI luminaires use the identical motion sensor as MRI luminaires. See motion sensor details for ECF-MRI. FS1R-100 Wireless Remote Programming Tool The FS1R-100 Remote Programming Tool accessory permits adjustment of ECF-MRI and ECF-APD-MRI sensor settings, including duration and dimming level on low, without the need to connect any wires to the luminaire. The FS1R-100 Wireless IR Programming Tool is a handheld tool for setup and testing of WattStopper FSP-211. It provides wireless access to the FSP-211 sensors for setup and parameter changes. The FS1R-100 display shows menus and prompts to lead you through each process. The navigation pad provides a familiar way to navigate through the customization fields. Within a certain mounting height of the sensor, the FS1R-100 allows modification of the system without requiring ladders or tools simply with a touch of a few buttons. The FS1R-100 IR transceiver allows bi-directional communication between the FSP-211 and the FS1R-100 programming tool . Simple menu screens let you see the current status of the system and make changes. It can change FSP-211 sensor parameters such as high/low mode, sensitivity, time delay, cut off and more. With the FS1R-100 you can also establish and store FSP-211 parameter profiles. The FS1R-100 operates on three standard 1.5V AAA Alkaline batteries or three rechargeable AAA NiMH batteries. The battery status displays in the upper right corner of the display. Three bars next to BAT= indicates a full battery charge. A warning appears on the display when the battery level falls below a minimum acceptable level. To conserve battery power, the FS1R-100 automatically shuts off 10 minutes after the last key press. You navigate from one field to another using (up) or (down) arrow keys. The active field is indicated by flashing (alternates between yellow text on black background and black text on yellow background.) Once active, use the Select button to move to a menu or function within the active field. Value fields are used to adjust parameter settings. They are shown in “less- than/greater-than” symbols: <value>. Once active, change them using (left) and (right) arrow keys. In general the up key increments and the down key decrements a value. Selections wrap-around if you continue to press the key beyond maximum or minimum values. Moving away from the value field overwrites the original value. The Home button takes you to the main menu. The Back button can be thought of as an undo function. It takes you back one screen. Changes that were in process prior to pressing the key are lost.More information on the FS1R-100 Remote Programming Tool is available at wattstopper.com. Luminaire Configuration Information (Continued) Top Coverage PatternSide Coverage Pattern 1H 2H 2H Distances are approximate. H = Height above ground. FSP-201FSP-211FD-101FD-301 Home/Main Menu Up Select Down Right/NextLeft Back Power On/Off BAT= ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 6 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires General Description The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. Integral control systems including motion response are available for further energy savings during off peak hours. Housing One piece die cast aluminum housing with integral arm and separate,self retained hinged, one piece die cast door frame. IP Rating LED light engine rated IP66. Vibration Resistance EcoForm with Standard Arm carries a 3G vibration rating that conforms to standards set forth by ANSI C136.31. Testing includes vibration to 3G acceleration in three axes, all performed on the same luminaire. Electrical Driver efficiency (>90% standard). 120-480V available (restrictions apply). Open/short circuit protection. Optional 0-10V dimming to 10% power. RoHS compliant. Surge protector standard. 10KA per ANSI/ IEEE C62.41.2. LED Board and Array 32, 48, or 64 LEDs. Color temperatures: 3000K, 4000K, 5700K +/- 250K. Minimum CRI of 70. Aluminum metal clad board. RoHS compliant. Energy Saving Benefits System efficacy up to 95 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods. Motion Sensors ECF-MR50, ECF-APD-MRO, ECF-MRI, ECF-APD- MRI luminaires may be specified for additional energy savings during unoccupied periods. See pages 4-6 for complete details. LED Thermal Management The housing design allows the one piece housing to provide excellent thermal management critical to long LED system life. Optical Systems Type 2, 3, 4, and 5 distributions available. Internal Shield option mounts to LED optics and is available with Type 2, 3, and 4 distributions to control backlight. Mounting Standard luminaire arm mounts to 4" round poles. Square pole adapter included with every luminaire. Round Pole Adapter (RPA) required for 3-3.9" poles. Retrofit Arm Mount EcoForm features an innovative retrofit arm kit. When specified with the retrofit arm (RAM) option, EcoForm seamlessly simplifies site conversions to LED by eliminating the need for additional pole drilling on most existing poles. RAM will be boxed separately. Listings ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations. Suitable for use in ambients from -30° to 40°C (-22° to 104°F). The quality systems of this facility have been registered by UL to the ISO 9001 series standards. All EcoForm luminaires equipped with NW and CW are DesignLights Consortium® qualified. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BRP), black (BLP), white (WP), and natural aluminum (NP). Consult factory for specs on optional or custom colors. Warranty EcoForm luminaires feature a 5 year limited warranty. Philips Gardco LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. LED Drivers also carry a 5 year limited warranty. Motion sensors are covered by warranty for 5 years by the motion sensor manufacturer. Specifications 5.1875” 13.18 cm 2.375”6.03 cm26. LED Performance: PREDICTED LUMEN DEPRECIATION DATA13 Ambient Temperature °C Driver mA Calculated L70 Hours13,14 L70 Per TM-2114,15 Lumen Maintenance % @ 60,000 hours Up to 40 °C Up to 1050 mA > 350,000 Hours > 60,000 Hours 97% 13. Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. 14. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. 15. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours. ECOFORM OUTDOOR SITE & AREA PHILIPS GARDCO, LED SITE & AREA LUMINAIRE, ECOFORM The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. EcoForm features an innovative retrofit arm kit, simplifying site conversions to LED by eliminating the need to drill additional holes in most existing poles. Integral control systems available for further energy savings. Redefining value with outstanding performance Project: Location: Catalog No: Fixture Type: Mfg: Qty: Notes: G200-047 08/13 page 1 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Ordering guide Prefix Mounting Optics LED Array & LED Wattage LED Selection Voltage Finish Options ECF EcoForm Standard Luminaire ECF-DIM EcoForm with 0-10V Dimming ECF-APD1 EcoForm with Auto Profile Dimming ECF-MR502 EcoForm with Motion Response at 50% low Pole mounted sensor ECF-APD-MRO2 EcoForm with Auto Profile Dimming and Motion Response Override Pole mounted sensor ECF-MRI2,4 EcoForm with Motion Response at 50% low Luminaire mounted sensor ECF-APD-MRI2,4 EcoForm with Auto Profile Dimming with Motion Response Override Luminaire mounted sensor 1 Single 2 2@180 2@90 2@90 3 3@90 3@120 3@120 4 4@90 WS Wall mount including Surface conduit Rear entry permitted MA Mast Arm Fitter (requires 2-3/8" O.D. Mast Arm) 2 Type 2 3 Type 3 4 Type 4 5 Type 5 530 mA 55LA-32531 75LA-4853 100LA-6453 700mA 70LA-3270 105LA-4870 135LA-6470 1050mA 105LA-321A1 160LA-481A 215LA-641A CW 5,700K 70 CRI NW 4,000K 70 CRI WW3 3,000K 70 CRI UNV 120-277V HVU 347-480V 120 208 240 277 347 480 BRP Bronze Paint BLP Black Paint WP White Paint NP Natural Paint OC Optional Color Specify optional color or RAL ex: OC-LGP or OC-RAL7024. SC Special Color Specify. Must supply color chip. Requires factory quote. TL Tool-Less entry & driver removal hardware TB4 Terminal Block IS5 Internal Shield LF6,10 Line Fusing LFC6,10 Line Fusing for Canada PCR Photocell Receptacle Only PC6,7,10 Receptacle with Photocell PCB6,7,10 Photocell Button RAM Retrofit Arm Mount Kit PTF28 Pole Top Fitter for 2-3/8"-3" Tenon PTF38 Pole Top Fitter for 3"-3.5" Tenon PTF48 Pole Top Fitter for 3.5"-4" Tenon RPA9 Round Pole Adaptor for 3" to 3.9" OD BD Bird Deterrant (field installed only) 1. Available in 120V thru 277V only. 4. ECF-MRI requires outboarded sensor 6. Voltage must be specified. 9. No adaptor required for 4" round poles. 2. Available in 120V or 277V only. when used with Terminal Block (TB) option. 7. Not available in 480V. RPAs provided with Black Paint standard. 3. Contact factory for lead times on warm white. 5. Not available with Type 5 optics. 8. Not available in 3 @ 120. 10. Not available with UNV (120-277V). ® ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 2 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires LED Wattage and Lumen Values - Standard EcoForm Luminaire EcoForm Drill Template (Standard Arm Mount) Initial Lumens12 Order Code (standard units) Array Quantity Total LEDs LED Current (mA) Average System Watts11 LED Selection 2 Type 2 3 Type 3 4 Type 4 5 Type 5 55LA-3253 232530 52 NW5,994 (s)5,895 (s)5,823 (s)5,588 (s) 75LA-4853 348530 77NW8,899 (s)8,753 (s)8,646 (s)8,297 (s) 100LA-6453 464530 103NW11,896 (s)11,700 11,558 11,091 70LA-3270 232700 69 NW7,385 (s)7,576 (s)7,293 (s)7,068 (s) 105LA-4870 348700 104NW10,965 (s)11,249 (s)10,828 (s)10,494 (s) 135LA-6470 464700 139NW14,657 (s)15,037 14,475 (s)14,028 105LA-321A 2321050107NW10,199 (s)10,458 10,072 (s)9,767 160LA-481A 3481050158NW15,144 (s)15,565 14,955 (s)14,465 215LA-641A 4 64 1050 211 NW 20,243 20,252 19,991 19,880 11. System input wattage may vary based on input voltage, by up to +/- 10% , and based on manufacturer forward voltage, by up to +/- 8%. 12. Lumen values based on photometric tests performed in compliance with IESNA LM-79. (s). Data is scaled based on tests of similar, but not identical, luminaires. Accessories (Order Separately) FS1R-100 MR hand held programmer (For use with 'MRI' motion response when field programming is required). If desired, only one is needed per job. MS-A-120V 120V input - Motion Sensor for MR50 or APD-MRO MS-A-277V 277V input - Motion Sensor for MR50 or APD-MRO 1.00” 2.54 cm 2.50” 6.35 cm 2.0” 5.08 cm Ø 0.41” 1.04 cm Ø 0.875” 2.22 cm Note: For reference only. Drawing not to scale. ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 3 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Dimensions - Standard EcoForm Luminaire Dimensions - EcoForm with Mast Arm Fitter (MA) Dimensions - EcoForm with Wall Mount (WS) Dimensions - EcoForm with Retrofit Arm Mount (RAM) 13”33 cm 3.3”8.38 cm 2.1” 5.3 cm 1.3”3.3 cm 24.2”61.47 cm 2.5”6.35 cm 24.2” 61.47 cm 6.1”15.5 cm Top View Top View Top View Top View Side View Side View Side View Side View End View End View End View End View 2.2” 5.58 cm 26”66.04 cm 23.8”60.45 cm 6.6”16.76 cm 13”33.02 cm 6.6”16.76 cm 3.3”8.38 cm Approximate Luminaire Weight: 20 Lbs (9.07 Kg) Approximate Luminaire Weight: 21 Lbs (9.53 Kg) Approximate Luminaire Weight: 21.5 Lbs (9.77 Kg) Approximate Luminaire Weight: 23.36 Lbs (10.6 Kg) Single Twin (2@180) 3/4@90 0.2 / 0.019 0.5 / 0.046 0.5 / 0.046 Single Twin (2@180) 3/4@90 0.3 / 0.028 0.6 / 0.056 0.7 / 0.065 Single 0.51 / 0.047 26.2” 66.55 cm 26.2” 66.55 cm 3.3” 8.4 cm 3.23” 8.2 cm 1.5”3.8 cm 2.0” 5.1 cm 6.5” 16.5 cm 6.5”16.5 cm 6.5” 16.5 cm 8.1” 20.57 cm 13”33 cm 13”33 cm 31.5” 80.01 cm 31.5” 80.01 cm 7.7” 19.56 cm 3.3” 8.4 cm 3.3”8.38 cm 2.1” 5.3 cm 13.4”34.04 cm 2.9”7.4 cm EPA (Ft2/M2) EPA (Ft2/M2) EPA (Ft2/M2) ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 4 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Black, 120V OR 277V Input White - Neutral Sensor Red Connects to Override Input (Orange) Line of DynaDimmer ECF Philips Gardco EcoForm LED standard luminaire providing constant wattage and constant light output when power to the luminaire is energized. ECF-DIM Philips Gardco EcoForm LED luminaire provided with 0-10V dimming for connection to a control system provided by others. ECF-APD Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming. Luminaire is provided with a Philips DynaDimmer module, programmed to go to 50% power, 50% light output two (2) hours prior to night time mid-point and remain at 50% for six (6) hours after night time mid-point. Mid-point is continuously recalculated by the Philips DynaDimmer module based on the average mid-point of the last two full night cycles. Short duration cycles, and power interruptions are ignored and do not affect the determination of mid-point. ECF-APD is available in 120V through 277V input only. ECF-APD Dimming Profile: ECF-MR50 Philips Gardco EcoForm LED luminaire with motion response, providing a 50% power reduction on low and a commensurate reduction in light output. The power and light output reduction is accomplished utilizing the Philips DynaDimmer module, programmed for a constant 50% power. Power supplied by the motion sensor connected to the override line on the DynaDimmer takes the luminaire to high setting, 100% power and light output, when motion is detected. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. ECF-MR50 is available in 120V through 277V input only to the luminaire. Motion sensors require single voltage 120V or 277V input. The Area PIR motion sensor is the WattStopper EW-200-120-W (120V Input - MSA- 120V) or the WattStopper EW-200-277-W (277V Input - MSA-277V.) One motion sensor per pole is required and is ordered separately. Area sensors require single voltage 120V or 277V input. The area motion detector provides coverage equal to up to 6 times the sensor height above ground, 270° from the front-center of the sensor. Area PIR Motion Sensor Coverage Pattern: Motion response requires that the pole include an additional hand hole 15 feet above the pole base, normally oriented 180° to the standard hand hole. For Philips Gardco poles, order the pole with the Motion Sensor Mounting (MSM) option which includes the hand hole and a special hand hole cover plate for the sensor with a 1/2" NPT receptacle centered on the hand hole cover plate into which the motion sensor mounts. Once the motion sensor is connected to the hand hole cover plate, then wiring connections are completed in the pole. The plate (complete with motion sensor attached and wired) is then mounted to the hand hole. If poles are supplied by others, the customer is responsible for providing suitable mounting accommodations for the motion sensor in the pole. ECF-APD-MRO Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming, with Motion Response Override. The ECF-APD-MRO combines the benefits of both automatic profile dimming and motion response, using the Philips DynaDimmer module. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for the ECF-APD. If motion is detected during the time that the luminaire is operating at 50%, the luminaire returns to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. NOTES: ECF-APD-MRO is available in 120V through 277V input only to luminaire. The motion sensor requires either 120V or 277V input to the motion sensor. The ECF-APD-MRO has the same pole requirements and utilizes the same motion sensors as the ECF-MR50. The motion sensor mounts and wires identically as well. The ECF-APD-MRO utilizes the identical dimming profile as shown for the ECF-APD. By combining the benefits of automatic profile dimming and motion response, the ECF-APD-MRO assures maximum energy savings, and insures that adequate light is present if motion is detected. All motion sensors utilized consume 0.0 watts in the off state. Luminaire Configuration Information 100% 100% 50% 50% Power On Mid Point 2 Hours 6 Hours Power Off 90° 9.5ft(3m)25ft(8m)52.5ft(16m) 8ft(2.4m) 90° 1H Height 6H3H Distances are approximate. H= Height Above Ground 270° Front Coverage Additional Hand Hole 15' Above Pole Base (oriented 180° to the standard hand hole) Motion Sensor Cover Plate with 1/2" NPT Coupling (supplied with pole)Wiring in Pole Attach Motion Sensor to Cover Plate coupling, Complete Wiring in Pole and Attach Cover Plate to Hand Hole Mounting to a Philips Gardco Pole ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 5 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires ECF-MRI Luminaires with Motion Response include a LED driver and an integral programmable motion sensor. The motion sensor is set to a constant 50%. When motion is detected, the luminaire goes to 100%. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. Available with 120V or 277V only. Luminaires include a passive infrared (PIR) motion sensor, WattStopper® FSP-211 equipped with an FSP-L3 lens, capable of detecting motion within 20 feet of the sensor, 180° around the luminaire, when placed at a 20 foot mounting height, or mounted on a wall. Available in 120V or 277V input only. Motion sensor off state power is 0.0 watts. The approximate motion sensor coverage pattern is as shown below. ECF-APD- MRI Luminaires with Automatic Profile Dimming and Motion Response Override combine the benefits of both automatic profile dimming and motion response. APD-MRI luminaires utilize Philips DynaDimmer. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for APD luminaires (see page 4). If motion is detected during the time that the luminaire is operating at 50%, the luminaire goes to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. APD-MRI luminaires are available with 120V or 277V input voltages only. APD-MRI luminaires use the identical motion sensor as MRI luminaires. See motion sensor details for ECF-MRI. FS1R-100 Wireless Remote Programming Tool The FS1R-100 Remote Programming Tool accessory permits adjustment of ECF-MRI and ECF-APD-MRI sensor settings, including duration and dimming level on low, without the need to connect any wires to the luminaire. The FS1R-100 Wireless IR Programming Tool is a handheld tool for setup and testing of WattStopper FSP-211. It provides wireless access to the FSP-211 sensors for setup and parameter changes. The FS1R-100 display shows menus and prompts to lead you through each process. The navigation pad provides a familiar way to navigate through the customization fields. Within a certain mounting height of the sensor, the FS1R-100 allows modification of the system without requiring ladders or tools simply with a touch of a few buttons. The FS1R-100 IR transceiver allows bi-directional communication between the FSP-211 and the FS1R-100 programming tool . Simple menu screens let you see the current status of the system and make changes. It can change FSP-211 sensor parameters such as high/low mode, sensitivity, time delay, cut off and more. With the FS1R-100 you can also establish and store FSP-211 parameter profiles. The FS1R-100 operates on three standard 1.5V AAA Alkaline batteries or three rechargeable AAA NiMH batteries. The battery status displays in the upper right corner of the display. Three bars next to BAT= indicates a full battery charge. A warning appears on the display when the battery level falls below a minimum acceptable level. To conserve battery power, the FS1R-100 automatically shuts off 10 minutes after the last key press. You navigate from one field to another using (up) or (down) arrow keys. The active field is indicated by flashing (alternates between yellow text on black background and black text on yellow background.) Once active, use the Select button to move to a menu or function within the active field. Value fields are used to adjust parameter settings. They are shown in “less- than/greater-than” symbols: <value>. Once active, change them using (left) and (right) arrow keys. In general the up key increments and the down key decrements a value. Selections wrap-around if you continue to press the key beyond maximum or minimum values. Moving away from the value field overwrites the original value. The Home button takes you to the main menu. The Back button can be thought of as an undo function. It takes you back one screen. Changes that were in process prior to pressing the key are lost.More information on the FS1R-100 Remote Programming Tool is available at wattstopper.com. Luminaire Configuration Information (Continued) Top Coverage PatternSide Coverage Pattern 1H 2H 2H Distances are approximate. H = Height above ground. FSP-201FSP-211FD-101FD-301 Home/Main Menu Up Select Down Right/NextLeft Back Power On/Off BAT= ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 6 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires General Description The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. Integral control systems including motion response are available for further energy savings during off peak hours. Housing One piece die cast aluminum housing with integral arm and separate,self retained hinged, one piece die cast door frame. IP Rating LED light engine rated IP66. Vibration Resistance EcoForm with Standard Arm carries a 3G vibration rating that conforms to standards set forth by ANSI C136.31. Testing includes vibration to 3G acceleration in three axes, all performed on the same luminaire. Electrical Driver efficiency (>90% standard). 120-480V available (restrictions apply). Open/short circuit protection. Optional 0-10V dimming to 10% power. RoHS compliant. Surge protector standard. 10KA per ANSI/ IEEE C62.41.2. LED Board and Array 32, 48, or 64 LEDs. Color temperatures: 3000K, 4000K, 5700K +/- 250K. Minimum CRI of 70. Aluminum metal clad board. RoHS compliant. Energy Saving Benefits System efficacy up to 95 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods. Motion Sensors ECF-MR50, ECF-APD-MRO, ECF-MRI, ECF-APD- MRI luminaires may be specified for additional energy savings during unoccupied periods. See pages 4-6 for complete details. LED Thermal Management The housing design allows the one piece housing to provide excellent thermal management critical to long LED system life. Optical Systems Type 2, 3, 4, and 5 distributions available. Internal Shield option mounts to LED optics and is available with Type 2, 3, and 4 distributions to control backlight. Mounting Standard luminaire arm mounts to 4" round poles. Square pole adapter included with every luminaire. Round Pole Adapter (RPA) required for 3-3.9" poles. Retrofit Arm Mount EcoForm features an innovative retrofit arm kit. When specified with the retrofit arm (RAM) option, EcoForm seamlessly simplifies site conversions to LED by eliminating the need for additional pole drilling on most existing poles. RAM will be boxed separately. Listings ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations. Suitable for use in ambients from -30° to 40°C (-22° to 104°F). The quality systems of this facility have been registered by UL to the ISO 9001 series standards. All EcoForm luminaires equipped with NW and CW are DesignLights Consortium® qualified. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BRP), black (BLP), white (WP), and natural aluminum (NP). Consult factory for specs on optional or custom colors. Warranty EcoForm luminaires feature a 5 year limited warranty. Philips Gardco LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. LED Drivers also carry a 5 year limited warranty. Motion sensors are covered by warranty for 5 years by the motion sensor manufacturer. Specifications 5.1875” 13.18 cm 2.375”6.03 cm26. LED Performance: PREDICTED LUMEN DEPRECIATION DATA13 Ambient Temperature °C Driver mA Calculated L70 Hours13,14 L70 Per TM-2114,15 Lumen Maintenance % @ 60,000 hours Up to 40 °C Up to 1050 mA > 350,000 Hours > 60,000 Hours 97% 13. Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. 14. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. 15. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours. ECOFORM OUTDOOR SITE & AREA PHILIPS GARDCO, LED SITE & AREA LUMINAIRE, ECOFORM The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. EcoForm features an innovative retrofit arm kit, simplifying site conversions to LED by eliminating the need to drill additional holes in most existing poles. Integral control systems available for further energy savings. Redefining value with outstanding performance Project: Location: Catalog No: Fixture Type: Mfg: Qty: Notes: G200-047 08/13 page 1 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Ordering guide Prefix Mounting Optics LED Array & LED Wattage LED Selection Voltage Finish Options ECF EcoForm Standard Luminaire ECF-DIM EcoForm with 0-10V Dimming ECF-APD1 EcoForm with Auto Profile Dimming ECF-MR502 EcoForm with Motion Response at 50% low Pole mounted sensor ECF-APD-MRO2 EcoForm with Auto Profile Dimming and Motion Response Override Pole mounted sensor ECF-MRI2,4 EcoForm with Motion Response at 50% low Luminaire mounted sensor ECF-APD-MRI2,4 EcoForm with Auto Profile Dimming with Motion Response Override Luminaire mounted sensor 1 Single 2 2@180 2@90 2@90 3 3@90 3@120 3@120 4 4@90 WS Wall mount including Surface conduit Rear entry permitted MA Mast Arm Fitter (requires 2-3/8" O.D. Mast Arm) 2 Type 2 3 Type 3 4 Type 4 5 Type 5 530 mA 55LA-32531 75LA-4853 100LA-6453 700mA 70LA-3270 105LA-4870 135LA-6470 1050mA 105LA-321A1 160LA-481A 215LA-641A CW 5,700K 70 CRI NW 4,000K 70 CRI WW3 3,000K 70 CRI UNV 120-277V HVU 347-480V 120 208 240 277 347 480 BRP Bronze Paint BLP Black Paint WP White Paint NP Natural Paint OC Optional Color Specify optional color or RAL ex: OC-LGP or OC-RAL7024. SC Special Color Specify. Must supply color chip. Requires factory quote. TL Tool-Less entry & driver removal hardware TB4 Terminal Block IS5 Internal Shield LF6,10 Line Fusing LFC6,10 Line Fusing for Canada PCR Photocell Receptacle Only PC6,7,10 Receptacle with Photocell PCB6,7,10 Photocell Button RAM Retrofit Arm Mount Kit PTF28 Pole Top Fitter for 2-3/8"-3" Tenon PTF38 Pole Top Fitter for 3"-3.5" Tenon PTF48 Pole Top Fitter for 3.5"-4" Tenon RPA9 Round Pole Adaptor for 3" to 3.9" OD BD Bird Deterrant (field installed only) 1. Available in 120V thru 277V only. 4. ECF-MRI requires outboarded sensor 6. Voltage must be specified. 9. No adaptor required for 4" round poles. 2. Available in 120V or 277V only. when used with Terminal Block (TB) option. 7. Not available in 480V. RPAs provided with Black Paint standard. 3. Contact factory for lead times on warm white. 5. Not available with Type 5 optics. 8. Not available in 3 @ 120. 10. Not available with UNV (120-277V). ® ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 2 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires LED Wattage and Lumen Values - Standard EcoForm Luminaire EcoForm Drill Template (Standard Arm Mount) Initial Lumens12 Order Code (standard units) Array Quantity Total LEDs LED Current (mA) Average System Watts11 LED Selection 2 Type 2 3 Type 3 4 Type 4 5 Type 5 55LA-3253 232530 52 NW5,994 (s)5,895 (s)5,823 (s)5,588 (s) 75LA-4853 348530 77NW8,899 (s)8,753 (s)8,646 (s)8,297 (s) 100LA-6453 464530 103NW11,896 (s)11,700 11,558 11,091 70LA-3270 232700 69 NW7,385 (s)7,576 (s)7,293 (s)7,068 (s) 105LA-4870 348700 104NW10,965 (s)11,249 (s)10,828 (s)10,494 (s) 135LA-6470 464700 139NW14,657 (s)15,037 14,475 (s)14,028 105LA-321A 2321050107NW10,199 (s)10,458 10,072 (s)9,767 160LA-481A 3481050158NW15,144 (s)15,565 14,955 (s)14,465 215LA-641A 4 64 1050 211 NW 20,243 20,252 19,991 19,880 11. System input wattage may vary based on input voltage, by up to +/- 10% , and based on manufacturer forward voltage, by up to +/- 8%. 12. Lumen values based on photometric tests performed in compliance with IESNA LM-79. (s). Data is scaled based on tests of similar, but not identical, luminaires. Accessories (Order Separately) FS1R-100 MR hand held programmer (For use with 'MRI' motion response when field programming is required). If desired, only one is needed per job. MS-A-120V 120V input - Motion Sensor for MR50 or APD-MRO MS-A-277V 277V input - Motion Sensor for MR50 or APD-MRO 1.00” 2.54 cm 2.50” 6.35 cm 2.0” 5.08 cm Ø 0.41” 1.04 cm Ø 0.875” 2.22 cm Note: For reference only. Drawing not to scale. ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 3 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Dimensions - Standard EcoForm Luminaire Dimensions - EcoForm with Mast Arm Fitter (MA) Dimensions - EcoForm with Wall Mount (WS) Dimensions - EcoForm with Retrofit Arm Mount (RAM) 13”33 cm 3.3”8.38 cm 2.1” 5.3 cm 1.3”3.3 cm 24.2”61.47 cm 2.5”6.35 cm 24.2” 61.47 cm 6.1”15.5 cm Top View Top View Top View Top View Side View Side View Side View Side View End View End View End View End View 2.2” 5.58 cm 26”66.04 cm 23.8”60.45 cm 6.6”16.76 cm 13”33.02 cm 6.6”16.76 cm 3.3”8.38 cm Approximate Luminaire Weight: 20 Lbs (9.07 Kg) Approximate Luminaire Weight: 21 Lbs (9.53 Kg) Approximate Luminaire Weight: 21.5 Lbs (9.77 Kg) Approximate Luminaire Weight: 23.36 Lbs (10.6 Kg) Single Twin (2@180) 3/4@90 0.2 / 0.019 0.5 / 0.046 0.5 / 0.046 Single Twin (2@180) 3/4@90 0.3 / 0.028 0.6 / 0.056 0.7 / 0.065 Single 0.51 / 0.047 26.2” 66.55 cm 26.2” 66.55 cm 3.3” 8.4 cm 3.23” 8.2 cm 1.5”3.8 cm 2.0” 5.1 cm 6.5” 16.5 cm 6.5”16.5 cm 6.5” 16.5 cm 8.1” 20.57 cm 13”33 cm 13”33 cm 31.5” 80.01 cm 31.5” 80.01 cm 7.7” 19.56 cm 3.3” 8.4 cm 3.3”8.38 cm 2.1” 5.3 cm 13.4”34.04 cm 2.9”7.4 cm EPA (Ft2/M2) EPA (Ft2/M2) EPA (Ft2/M2) ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 4 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Black, 120V OR 277V Input White - Neutral Sensor Red Connects to Override Input (Orange) Line of DynaDimmer ECF Philips Gardco EcoForm LED standard luminaire providing constant wattage and constant light output when power to the luminaire is energized. ECF-DIM Philips Gardco EcoForm LED luminaire provided with 0-10V dimming for connection to a control system provided by others. ECF-APD Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming. Luminaire is provided with a Philips DynaDimmer module, programmed to go to 50% power, 50% light output two (2) hours prior to night time mid-point and remain at 50% for six (6) hours after night time mid-point. Mid-point is continuously recalculated by the Philips DynaDimmer module based on the average mid-point of the last two full night cycles. Short duration cycles, and power interruptions are ignored and do not affect the determination of mid-point. ECF-APD is available in 120V through 277V input only. ECF-APD Dimming Profile: ECF-MR50 Philips Gardco EcoForm LED luminaire with motion response, providing a 50% power reduction on low and a commensurate reduction in light output. The power and light output reduction is accomplished utilizing the Philips DynaDimmer module, programmed for a constant 50% power. Power supplied by the motion sensor connected to the override line on the DynaDimmer takes the luminaire to high setting, 100% power and light output, when motion is detected. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. ECF-MR50 is available in 120V through 277V input only to the luminaire. Motion sensors require single voltage 120V or 277V input. The Area PIR motion sensor is the WattStopper EW-200-120-W (120V Input - MSA- 120V) or the WattStopper EW-200-277-W (277V Input - MSA-277V.) One motion sensor per pole is required and is ordered separately. Area sensors require single voltage 120V or 277V input. The area motion detector provides coverage equal to up to 6 times the sensor height above ground, 270° from the front-center of the sensor. Area PIR Motion Sensor Coverage Pattern: Motion response requires that the pole include an additional hand hole 15 feet above the pole base, normally oriented 180° to the standard hand hole. For Philips Gardco poles, order the pole with the Motion Sensor Mounting (MSM) option which includes the hand hole and a special hand hole cover plate for the sensor with a 1/2" NPT receptacle centered on the hand hole cover plate into which the motion sensor mounts. Once the motion sensor is connected to the hand hole cover plate, then wiring connections are completed in the pole. The plate (complete with motion sensor attached and wired) is then mounted to the hand hole. If poles are supplied by others, the customer is responsible for providing suitable mounting accommodations for the motion sensor in the pole. ECF-APD-MRO Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming, with Motion Response Override. The ECF-APD-MRO combines the benefits of both automatic profile dimming and motion response, using the Philips DynaDimmer module. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for the ECF-APD. If motion is detected during the time that the luminaire is operating at 50%, the luminaire returns to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. NOTES: ECF-APD-MRO is available in 120V through 277V input only to luminaire. The motion sensor requires either 120V or 277V input to the motion sensor. The ECF-APD-MRO has the same pole requirements and utilizes the same motion sensors as the ECF-MR50. The motion sensor mounts and wires identically as well. The ECF-APD-MRO utilizes the identical dimming profile as shown for the ECF-APD. By combining the benefits of automatic profile dimming and motion response, the ECF-APD-MRO assures maximum energy savings, and insures that adequate light is present if motion is detected. All motion sensors utilized consume 0.0 watts in the off state. Luminaire Configuration Information 100% 100% 50% 50% Power On Mid Point 2 Hours 6 Hours Power Off 90° 9.5ft(3m)25ft(8m)52.5ft(16m) 8ft(2.4m) 90° 1H Height 6H3H Distances are approximate. H= Height Above Ground 270° Front Coverage Additional Hand Hole 15' Above Pole Base (oriented 180° to the standard hand hole) Motion Sensor Cover Plate with 1/2" NPT Coupling (supplied with pole)Wiring in Pole Attach Motion Sensor to Cover Plate coupling, Complete Wiring in Pole and Attach Cover Plate to Hand Hole Mounting to a Philips Gardco Pole ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 5 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires ECF-MRI Luminaires with Motion Response include a LED driver and an integral programmable motion sensor. The motion sensor is set to a constant 50%. When motion is detected, the luminaire goes to 100%. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. Available with 120V or 277V only. Luminaires include a passive infrared (PIR) motion sensor, WattStopper® FSP-211 equipped with an FSP-L3 lens, capable of detecting motion within 20 feet of the sensor, 180° around the luminaire, when placed at a 20 foot mounting height, or mounted on a wall. Available in 120V or 277V input only. Motion sensor off state power is 0.0 watts. The approximate motion sensor coverage pattern is as shown below. ECF-APD- MRI Luminaires with Automatic Profile Dimming and Motion Response Override combine the benefits of both automatic profile dimming and motion response. APD-MRI luminaires utilize Philips DynaDimmer. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for APD luminaires (see page 4). If motion is detected during the time that the luminaire is operating at 50%, the luminaire goes to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. APD-MRI luminaires are available with 120V or 277V input voltages only. APD-MRI luminaires use the identical motion sensor as MRI luminaires. See motion sensor details for ECF-MRI. FS1R-100 Wireless Remote Programming Tool The FS1R-100 Remote Programming Tool accessory permits adjustment of ECF-MRI and ECF-APD-MRI sensor settings, including duration and dimming level on low, without the need to connect any wires to the luminaire. The FS1R-100 Wireless IR Programming Tool is a handheld tool for setup and testing of WattStopper FSP-211. It provides wireless access to the FSP-211 sensors for setup and parameter changes. The FS1R-100 display shows menus and prompts to lead you through each process. The navigation pad provides a familiar way to navigate through the customization fields. Within a certain mounting height of the sensor, the FS1R-100 allows modification of the system without requiring ladders or tools simply with a touch of a few buttons. The FS1R-100 IR transceiver allows bi-directional communication between the FSP-211 and the FS1R-100 programming tool . Simple menu screens let you see the current status of the system and make changes. It can change FSP-211 sensor parameters such as high/low mode, sensitivity, time delay, cut off and more. With the FS1R-100 you can also establish and store FSP-211 parameter profiles. The FS1R-100 operates on three standard 1.5V AAA Alkaline batteries or three rechargeable AAA NiMH batteries. The battery status displays in the upper right corner of the display. Three bars next to BAT= indicates a full battery charge. A warning appears on the display when the battery level falls below a minimum acceptable level. To conserve battery power, the FS1R-100 automatically shuts off 10 minutes after the last key press. You navigate from one field to another using (up) or (down) arrow keys. The active field is indicated by flashing (alternates between yellow text on black background and black text on yellow background.) Once active, use the Select button to move to a menu or function within the active field. Value fields are used to adjust parameter settings. They are shown in “less- than/greater-than” symbols: <value>. Once active, change them using (left) and (right) arrow keys. In general the up key increments and the down key decrements a value. Selections wrap-around if you continue to press the key beyond maximum or minimum values. Moving away from the value field overwrites the original value. The Home button takes you to the main menu. The Back button can be thought of as an undo function. It takes you back one screen. Changes that were in process prior to pressing the key are lost.More information on the FS1R-100 Remote Programming Tool is available at wattstopper.com. Luminaire Configuration Information (Continued) Top Coverage PatternSide Coverage Pattern 1H 2H 2H Distances are approximate. H = Height above ground. FSP-201FSP-211FD-101FD-301 Home/Main Menu Up Select Down Right/NextLeft Back Power On/Off BAT= ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 6 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires General Description The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. Integral control systems including motion response are available for further energy savings during off peak hours. Housing One piece die cast aluminum housing with integral arm and separate,self retained hinged, one piece die cast door frame. IP Rating LED light engine rated IP66. Vibration Resistance EcoForm with Standard Arm carries a 3G vibration rating that conforms to standards set forth by ANSI C136.31. Testing includes vibration to 3G acceleration in three axes, all performed on the same luminaire. Electrical Driver efficiency (>90% standard). 120-480V available (restrictions apply). Open/short circuit protection. Optional 0-10V dimming to 10% power. RoHS compliant. Surge protector standard. 10KA per ANSI/ IEEE C62.41.2. LED Board and Array 32, 48, or 64 LEDs. Color temperatures: 3000K, 4000K, 5700K +/- 250K. Minimum CRI of 70. Aluminum metal clad board. RoHS compliant. Energy Saving Benefits System efficacy up to 95 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods. Motion Sensors ECF-MR50, ECF-APD-MRO, ECF-MRI, ECF-APD- MRI luminaires may be specified for additional energy savings during unoccupied periods. See pages 4-6 for complete details. LED Thermal Management The housing design allows the one piece housing to provide excellent thermal management critical to long LED system life. Optical Systems Type 2, 3, 4, and 5 distributions available. Internal Shield option mounts to LED optics and is available with Type 2, 3, and 4 distributions to control backlight. Mounting Standard luminaire arm mounts to 4" round poles. Square pole adapter included with every luminaire. Round Pole Adapter (RPA) required for 3-3.9" poles. Retrofit Arm Mount EcoForm features an innovative retrofit arm kit. When specified with the retrofit arm (RAM) option, EcoForm seamlessly simplifies site conversions to LED by eliminating the need for additional pole drilling on most existing poles. RAM will be boxed separately. Listings ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations. Suitable for use in ambients from -30° to 40°C (-22° to 104°F). The quality systems of this facility have been registered by UL to the ISO 9001 series standards. All EcoForm luminaires equipped with NW and CW are DesignLights Consortium® qualified. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BRP), black (BLP), white (WP), and natural aluminum (NP). Consult factory for specs on optional or custom colors. Warranty EcoForm luminaires feature a 5 year limited warranty. Philips Gardco LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. LED Drivers also carry a 5 year limited warranty. Motion sensors are covered by warranty for 5 years by the motion sensor manufacturer. Specifications 5.1875” 13.18 cm 2.375”6.03 cm26. LED Performance: PREDICTED LUMEN DEPRECIATION DATA13 Ambient Temperature °C Driver mA Calculated L70 Hours13,14 L70 Per TM-2114,15 Lumen Maintenance % @ 60,000 hours Up to 40 °C Up to 1050 mA > 350,000 Hours > 60,000 Hours 97% 13. Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. 14. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. 15. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours. ECOFORM OUTDOOR SITE & AREA PHILIPS GARDCO, LED SITE & AREA LUMINAIRE, ECOFORM The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. EcoForm features an innovative retrofit arm kit, simplifying site conversions to LED by eliminating the need to drill additional holes in most existing poles. Integral control systems available for further energy savings. Redefining value with outstanding performance Project: Location: Catalog No: Fixture Type: Mfg: Qty: Notes: G200-047 08/13 page 1 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Ordering guide Prefix Mounting Optics LED Array & LED Wattage LED Selection Voltage Finish Options ECF EcoForm Standard Luminaire ECF-DIM EcoForm with 0-10V Dimming ECF-APD1 EcoForm with Auto Profile Dimming ECF-MR502 EcoForm with Motion Response at 50% low Pole mounted sensor ECF-APD-MRO2 EcoForm with Auto Profile Dimming and Motion Response Override Pole mounted sensor ECF-MRI2,4 EcoForm with Motion Response at 50% low Luminaire mounted sensor ECF-APD-MRI2,4 EcoForm with Auto Profile Dimming with Motion Response Override Luminaire mounted sensor 1 Single 2 2@180 2@90 2@90 3 3@90 3@120 3@120 4 4@90 WS Wall mount including Surface conduit Rear entry permitted MA Mast Arm Fitter (requires 2-3/8" O.D. Mast Arm) 2 Type 2 3 Type 3 4 Type 4 5 Type 5 530 mA 55LA-32531 75LA-4853 100LA-6453 700mA 70LA-3270 105LA-4870 135LA-6470 1050mA 105LA-321A1 160LA-481A 215LA-641A CW 5,700K 70 CRI NW 4,000K 70 CRI WW3 3,000K 70 CRI UNV 120-277V HVU 347-480V 120 208 240 277 347 480 BRP Bronze Paint BLP Black Paint WP White Paint NP Natural Paint OC Optional Color Specify optional color or RAL ex: OC-LGP or OC-RAL7024. SC Special Color Specify. Must supply color chip. Requires factory quote. TL Tool-Less entry & driver removal hardware TB4 Terminal Block IS5 Internal Shield LF6,10 Line Fusing LFC6,10 Line Fusing for Canada PCR Photocell Receptacle Only PC6,7,10 Receptacle with Photocell PCB6,7,10 Photocell Button RAM Retrofit Arm Mount Kit PTF28 Pole Top Fitter for 2-3/8"-3" Tenon PTF38 Pole Top Fitter for 3"-3.5" Tenon PTF48 Pole Top Fitter for 3.5"-4" Tenon RPA9 Round Pole Adaptor for 3" to 3.9" OD BD Bird Deterrant (field installed only) 1. Available in 120V thru 277V only. 4. ECF-MRI requires outboarded sensor 6. Voltage must be specified. 9. No adaptor required for 4" round poles. 2. Available in 120V or 277V only. when used with Terminal Block (TB) option. 7. Not available in 480V. RPAs provided with Black Paint standard. 3. Contact factory for lead times on warm white. 5. Not available with Type 5 optics. 8. Not available in 3 @ 120. 10. Not available with UNV (120-277V). ® ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 2 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires LED Wattage and Lumen Values - Standard EcoForm Luminaire EcoForm Drill Template (Standard Arm Mount) Initial Lumens12 Order Code (standard units) Array Quantity Total LEDs LED Current (mA) Average System Watts11 LED Selection 2 Type 2 3 Type 3 4 Type 4 5 Type 5 55LA-3253 232530 52 NW5,994 (s)5,895 (s)5,823 (s)5,588 (s) 75LA-4853 348530 77NW8,899 (s)8,753 (s)8,646 (s)8,297 (s) 100LA-6453 464530 103NW11,896 (s)11,700 11,558 11,091 70LA-3270 232700 69 NW7,385 (s)7,576 (s)7,293 (s)7,068 (s) 105LA-4870 348700 104NW10,965 (s)11,249 (s)10,828 (s)10,494 (s) 135LA-6470 464700 139NW14,657 (s)15,037 14,475 (s)14,028 105LA-321A 2321050107NW10,199 (s)10,458 10,072 (s)9,767 160LA-481A 3481050158NW15,144 (s)15,565 14,955 (s)14,465 215LA-641A 4 64 1050 211 NW 20,243 20,252 19,991 19,880 11. System input wattage may vary based on input voltage, by up to +/- 10% , and based on manufacturer forward voltage, by up to +/- 8%. 12. Lumen values based on photometric tests performed in compliance with IESNA LM-79. (s). Data is scaled based on tests of similar, but not identical, luminaires. Accessories (Order Separately) FS1R-100 MR hand held programmer (For use with 'MRI' motion response when field programming is required). If desired, only one is needed per job. MS-A-120V 120V input - Motion Sensor for MR50 or APD-MRO MS-A-277V 277V input - Motion Sensor for MR50 or APD-MRO 1.00” 2.54 cm 2.50” 6.35 cm 2.0” 5.08 cm Ø 0.41” 1.04 cm Ø 0.875” 2.22 cm Note: For reference only. Drawing not to scale. ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 3 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Dimensions - Standard EcoForm Luminaire Dimensions - EcoForm with Mast Arm Fitter (MA) Dimensions - EcoForm with Wall Mount (WS) Dimensions - EcoForm with Retrofit Arm Mount (RAM) 13”33 cm 3.3”8.38 cm 2.1” 5.3 cm 1.3”3.3 cm 24.2”61.47 cm 2.5”6.35 cm 24.2” 61.47 cm 6.1”15.5 cm Top View Top View Top View Top View Side View Side View Side View Side View End View End View End View End View 2.2” 5.58 cm 26”66.04 cm 23.8”60.45 cm 6.6”16.76 cm 13”33.02 cm 6.6”16.76 cm 3.3”8.38 cm Approximate Luminaire Weight: 20 Lbs (9.07 Kg) Approximate Luminaire Weight: 21 Lbs (9.53 Kg) Approximate Luminaire Weight: 21.5 Lbs (9.77 Kg) Approximate Luminaire Weight: 23.36 Lbs (10.6 Kg) Single Twin (2@180) 3/4@90 0.2 / 0.019 0.5 / 0.046 0.5 / 0.046 Single Twin (2@180) 3/4@90 0.3 / 0.028 0.6 / 0.056 0.7 / 0.065 Single 0.51 / 0.047 26.2” 66.55 cm 26.2” 66.55 cm 3.3” 8.4 cm 3.23” 8.2 cm 1.5”3.8 cm 2.0” 5.1 cm 6.5” 16.5 cm 6.5”16.5 cm 6.5” 16.5 cm 8.1” 20.57 cm 13”33 cm 13”33 cm 31.5” 80.01 cm 31.5” 80.01 cm 7.7” 19.56 cm 3.3” 8.4 cm 3.3”8.38 cm 2.1” 5.3 cm 13.4”34.04 cm 2.9”7.4 cm EPA (Ft2/M2) EPA (Ft2/M2) EPA (Ft2/M2) ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 4 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires Black, 120V OR 277V Input White - Neutral Sensor Red Connects to Override Input (Orange) Line of DynaDimmer ECF Philips Gardco EcoForm LED standard luminaire providing constant wattage and constant light output when power to the luminaire is energized. ECF-DIM Philips Gardco EcoForm LED luminaire provided with 0-10V dimming for connection to a control system provided by others. ECF-APD Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming. Luminaire is provided with a Philips DynaDimmer module, programmed to go to 50% power, 50% light output two (2) hours prior to night time mid-point and remain at 50% for six (6) hours after night time mid-point. Mid-point is continuously recalculated by the Philips DynaDimmer module based on the average mid-point of the last two full night cycles. Short duration cycles, and power interruptions are ignored and do not affect the determination of mid-point. ECF-APD is available in 120V through 277V input only. ECF-APD Dimming Profile: ECF-MR50 Philips Gardco EcoForm LED luminaire with motion response, providing a 50% power reduction on low and a commensurate reduction in light output. The power and light output reduction is accomplished utilizing the Philips DynaDimmer module, programmed for a constant 50% power. Power supplied by the motion sensor connected to the override line on the DynaDimmer takes the luminaire to high setting, 100% power and light output, when motion is detected. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. ECF-MR50 is available in 120V through 277V input only to the luminaire. Motion sensors require single voltage 120V or 277V input. The Area PIR motion sensor is the WattStopper EW-200-120-W (120V Input - MSA- 120V) or the WattStopper EW-200-277-W (277V Input - MSA-277V.) One motion sensor per pole is required and is ordered separately. Area sensors require single voltage 120V or 277V input. The area motion detector provides coverage equal to up to 6 times the sensor height above ground, 270° from the front-center of the sensor. Area PIR Motion Sensor Coverage Pattern: Motion response requires that the pole include an additional hand hole 15 feet above the pole base, normally oriented 180° to the standard hand hole. For Philips Gardco poles, order the pole with the Motion Sensor Mounting (MSM) option which includes the hand hole and a special hand hole cover plate for the sensor with a 1/2" NPT receptacle centered on the hand hole cover plate into which the motion sensor mounts. Once the motion sensor is connected to the hand hole cover plate, then wiring connections are completed in the pole. The plate (complete with motion sensor attached and wired) is then mounted to the hand hole. If poles are supplied by others, the customer is responsible for providing suitable mounting accommodations for the motion sensor in the pole. ECF-APD-MRO Philips Gardco EcoForm LED luminaire with Automatic Profile Dimming, with Motion Response Override. The ECF-APD-MRO combines the benefits of both automatic profile dimming and motion response, using the Philips DynaDimmer module. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for the ECF-APD. If motion is detected during the time that the luminaire is operating at 50%, the luminaire returns to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. NOTES: ECF-APD-MRO is available in 120V through 277V input only to luminaire. The motion sensor requires either 120V or 277V input to the motion sensor. The ECF-APD-MRO has the same pole requirements and utilizes the same motion sensors as the ECF-MR50. The motion sensor mounts and wires identically as well. The ECF-APD-MRO utilizes the identical dimming profile as shown for the ECF-APD. By combining the benefits of automatic profile dimming and motion response, the ECF-APD-MRO assures maximum energy savings, and insures that adequate light is present if motion is detected. All motion sensors utilized consume 0.0 watts in the off state. Luminaire Configuration Information 100% 100% 50% 50% Power On Mid Point 2 Hours 6 Hours Power Off 90° 9.5ft(3m)25ft(8m)52.5ft(16m) 8ft(2.4m) 90° 1H Height 6H3H Distances are approximate. H= Height Above Ground 270° Front Coverage Additional Hand Hole 15' Above Pole Base (oriented 180° to the standard hand hole) Motion Sensor Cover Plate with 1/2" NPT Coupling (supplied with pole)Wiring in Pole Attach Motion Sensor to Cover Plate coupling, Complete Wiring in Pole and Attach Cover Plate to Hand Hole Mounting to a Philips Gardco Pole ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 5 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires ECF-MRI Luminaires with Motion Response include a LED driver and an integral programmable motion sensor. The motion sensor is set to a constant 50%. When motion is detected, the luminaire goes to 100%. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. Available with 120V or 277V only. Luminaires include a passive infrared (PIR) motion sensor, WattStopper® FSP-211 equipped with an FSP-L3 lens, capable of detecting motion within 20 feet of the sensor, 180° around the luminaire, when placed at a 20 foot mounting height, or mounted on a wall. Available in 120V or 277V input only. Motion sensor off state power is 0.0 watts. The approximate motion sensor coverage pattern is as shown below. ECF-APD- MRI Luminaires with Automatic Profile Dimming and Motion Response Override combine the benefits of both automatic profile dimming and motion response. APD-MRI luminaires utilize Philips DynaDimmer. The luminaire will dim to 50% power, 50% light output, per the dimming profile shown for APD luminaires (see page 4). If motion is detected during the time that the luminaire is operating at 50%, the luminaire goes to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 5 minutes. APD-MRI luminaires are available with 120V or 277V input voltages only. APD-MRI luminaires use the identical motion sensor as MRI luminaires. See motion sensor details for ECF-MRI. FS1R-100 Wireless Remote Programming Tool The FS1R-100 Remote Programming Tool accessory permits adjustment of ECF-MRI and ECF-APD-MRI sensor settings, including duration and dimming level on low, without the need to connect any wires to the luminaire. The FS1R-100 Wireless IR Programming Tool is a handheld tool for setup and testing of WattStopper FSP-211. It provides wireless access to the FSP-211 sensors for setup and parameter changes. The FS1R-100 display shows menus and prompts to lead you through each process. The navigation pad provides a familiar way to navigate through the customization fields. Within a certain mounting height of the sensor, the FS1R-100 allows modification of the system without requiring ladders or tools simply with a touch of a few buttons. The FS1R-100 IR transceiver allows bi-directional communication between the FSP-211 and the FS1R-100 programming tool . Simple menu screens let you see the current status of the system and make changes. It can change FSP-211 sensor parameters such as high/low mode, sensitivity, time delay, cut off and more. With the FS1R-100 you can also establish and store FSP-211 parameter profiles. The FS1R-100 operates on three standard 1.5V AAA Alkaline batteries or three rechargeable AAA NiMH batteries. The battery status displays in the upper right corner of the display. Three bars next to BAT= indicates a full battery charge. A warning appears on the display when the battery level falls below a minimum acceptable level. To conserve battery power, the FS1R-100 automatically shuts off 10 minutes after the last key press. You navigate from one field to another using (up) or (down) arrow keys. The active field is indicated by flashing (alternates between yellow text on black background and black text on yellow background.) Once active, use the Select button to move to a menu or function within the active field. Value fields are used to adjust parameter settings. They are shown in “less- than/greater-than” symbols: <value>. Once active, change them using (left) and (right) arrow keys. In general the up key increments and the down key decrements a value. Selections wrap-around if you continue to press the key beyond maximum or minimum values. Moving away from the value field overwrites the original value. The Home button takes you to the main menu. The Back button can be thought of as an undo function. It takes you back one screen. Changes that were in process prior to pressing the key are lost.More information on the FS1R-100 Remote Programming Tool is available at wattstopper.com. Luminaire Configuration Information (Continued) Top Coverage PatternSide Coverage Pattern 1H 2H 2H Distances are approximate. H = Height above ground. FSP-201FSP-211FD-101FD-301 Home/Main Menu Up Select Down Right/NextLeft Back Power On/Off BAT= ECOFORM OUTDOOR SITE & AREA G200-047 08/13 page 6 of 6 © 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires General Description The Philips Gardco EcoForm combines economy with performance in an LED area luminaire. Capable of delivering up to 20,000 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. Integral control systems including motion response are available for further energy savings during off peak hours. Housing One piece die cast aluminum housing with integral arm and separate,self retained hinged, one piece die cast door frame. IP Rating LED light engine rated IP66. Vibration Resistance EcoForm with Standard Arm carries a 3G vibration rating that conforms to standards set forth by ANSI C136.31. Testing includes vibration to 3G acceleration in three axes, all performed on the same luminaire. Electrical Driver efficiency (>90% standard). 120-480V available (restrictions apply). Open/short circuit protection. Optional 0-10V dimming to 10% power. RoHS compliant. Surge protector standard. 10KA per ANSI/ IEEE C62.41.2. LED Board and Array 32, 48, or 64 LEDs. Color temperatures: 3000K, 4000K, 5700K +/- 250K. Minimum CRI of 70. Aluminum metal clad board. RoHS compliant. Energy Saving Benefits System efficacy up to 95 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods. Motion Sensors ECF-MR50, ECF-APD-MRO, ECF-MRI, ECF-APD- MRI luminaires may be specified for additional energy savings during unoccupied periods. See pages 4-6 for complete details. LED Thermal Management The housing design allows the one piece housing to provide excellent thermal management critical to long LED system life. Optical Systems Type 2, 3, 4, and 5 distributions available. Internal Shield option mounts to LED optics and is available with Type 2, 3, and 4 distributions to control backlight. Mounting Standard luminaire arm mounts to 4" round poles. Square pole adapter included with every luminaire. Round Pole Adapter (RPA) required for 3-3.9" poles. Retrofit Arm Mount EcoForm features an innovative retrofit arm kit. When specified with the retrofit arm (RAM) option, EcoForm seamlessly simplifies site conversions to LED by eliminating the need for additional pole drilling on most existing poles. RAM will be boxed separately. Listings ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations. Suitable for use in ambients from -30° to 40°C (-22° to 104°F). The quality systems of this facility have been registered by UL to the ISO 9001 series standards. All EcoForm luminaires equipped with NW and CW are DesignLights Consortium® qualified. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BRP), black (BLP), white (WP), and natural aluminum (NP). Consult factory for specs on optional or custom colors. Warranty EcoForm luminaires feature a 5 year limited warranty. Philips Gardco LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. LED Drivers also carry a 5 year limited warranty. Motion sensors are covered by warranty for 5 years by the motion sensor manufacturer. Specifications 5.1875” 13.18 cm 2.375”6.03 cm26. LED Performance: PREDICTED LUMEN DEPRECIATION DATA13 Ambient Temperature °C Driver mA Calculated L70 Hours13,14 L70 Per TM-2114,15 Lumen Maintenance % @ 60,000 hours Up to 40 °C Up to 1050 mA > 350,000 Hours > 60,000 Hours 97% 13. Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. 14. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. 15. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours.