HomeMy WebLinkAbout14- Professional Services Agreement Sanborn Map CompanyPROFESSIONAL SERVICES AGREEMENT
THIS AGREEMENT is made and entered into this 15' uay of September, 2014, by and
between the CITY OF BOZEMAN, MONTANA, a self governing municipal corporation
organized and existing under its Charter and the laws of the State of Montana, 121 North Rouse
Street, Bozeman, Montana, with a mailing address of PO Box 1230, Bozeman, MT 59771,
hereinafter referred to as "City," and, The Sanborn Map Company, Inc., 1935 Jamboree Drive,
Suite 100, Colorado Springs, CO 80920, hereinafter referred to as "Contractor."
In consideration of the mutual covenants and agreements herein contained, the receipt and
sufficiency whereof being hereby acknowledged, the parties hereto agree as follows:
1. Purpose: City agrees to enter this Agreement with Contractor to perform the
services described in the Scope of Services attached hereto as Attachment "A" and by this reference
made a part hereof.
2. Term/Effective Date: This Agreement is effective upon the date of its execution.
3. Scope of Work: Contractor will perform the work and provide the services in
accordance with the requirements of the Scope of Services. For conflicts between this Agreement
and the Scope of Services, unless specifically provided otherwise, the Agreement governs.
4. Payment: City agrees to pay Contractor the amount specified in the Scope of
Services set forth in Attachment A incorporated herein by this reference. Any alteration or
deviation from the described services that involves additional costs above the Agreement amount
will be performed by Contractor after written request by the City, and will become an additional
charge over and above the amount listed in the Scope of Services. The City must agree in writing
upon any additional charges.
5. Contractor's Representations: To induce City to enter into this Agreement,
Contractor makes the following representations:
a. Contractor has familiarized itself with the nature and extent of this Agreement, the
Scope of Services, and with all local conditions and federal, state and local laws, ordinances, rules,
Professional Services Agreement for Impervious Surface Data Collection
FY 2015
Page 1 of 10
and regulations that in any manner may affect cost, progress or performance of the Scope of
Services.
b. Contractor represents and warrants to City that it has the experience and ability to
perform the services required by this Agreement; that it will perform said services in a professional,
competent and timely manner and with diligence and skill; that it has the power to enter into and
perform this Agreement and grant the rights granted in it; and that its performance of this
Agreement shall not infringe upon or violate the rights of any third party, whether rights of
copyright, trademark, privacy, publicity, libel, slander or any other rights of any nature whatsoever,
or violate any federal, state and municipal laws. The City will not determine or exercise control as
to general procedures or formats necessary to have these services meet this warranty.
6. Independent Contractor Status/Labor Relations: The parties agree that
Contractor is an independent contractor for purposes of this Agreement and is not to be considered
an employee of the City for any purpose. Contractor is not subject to the terms and provisions of
the City's personnel policies handbook and may not be considered a City employee for workers'
compensation or any other purpose. Contractor is not authorized to represent the City or otherwise
bind the City in any dealings between Contractor and any third parties.
Contractor shall comply with the applicable requirements of the Workers' Compensation
Act, Title 39, Chapter 71, MCA, and the Occupational Disease Act of Montana, Title 39, Chapter
71, MCA. Contractor shall maintain workers' compensation coverage for all members and
employees of Contractor's business, except for those members who are exempted by law.
Contractor shall furnish the City with copies showing one of the following: (1) a binder for
workers' compensation coverage by an insurer licensed and authorized to provide workers'
compensation insurance in the State of Montana; or (2) proof of exemption from workers'
compensation granted by law for independent contractors.
Contractor shall indemnify, defend, and hold the City harmless from any and all claims,
demands, costs, expenses, damages, and liabilities arising out of, resulting from, or occurring in
connection with any labor problems or disputes or any delays or stoppages of work associated with
such problems or disputes.
Contractor shall indemnify, defend, and hold the City harmless from any and all claims,
demands, costs, expenses, damages, and liabilities arising out of, resulting from, or occurring in
connection with any labor problems or disputes or any delays or stoppages of work associated with
such problems or disputes and for any claims regarding underpaid prevailing wages.
Professional Services Agreement for Impervious Surface Data Collection
FY 2015
Page 2 of 10
7. Indemnity/Waiver of Claims/Insurance: For other than professional services
rendered, to the fullest extent permitted by law, Contractor agrees to release, defend, indemnify, and
hold harmless the City, its agents, representatives, employees, and officers (collectively referred to
for purposes of this Section as the City) from and against any and all claims, demands, actions, fees
and costs (including attorney's fees and the costs and fees of and expert witness and consultants),
losses, expenses, liabilities (including liability where activity is inherently or intrinsically
dangerous) or damages of whatever kind or nature connected therewith and without limit and
without regard to the cause or causes thereof or the negligence of any party or parties that may be
asserted against, recovered from or suffered by the City occasioned by, growing or arising out of or
resulting from or in any way related to: (i) the negligent, reckless, or intentional misconduct of the
Contractor; (ii) any negligent, reckless, or intentional misconduct of any of the Contractor's agents.
For the professional services rendered, to the fullest extent permitted by law, Contractor
agrees to indemnify and hold the City harmless against claims, demands, suits, damages, losses, and
expenses, including reasonable defense attorney fees, to the extent caused by the negligence or
willful misconduct of the Contractor or Contractor's agents or employees.
Such obligations shall not be construed to negate, abridge, or reduce other rights or
obligations of indemnity that would otherwise exist. The indemnification obligations of this Section
must not be construed to negate, abridge, or reduce any common-law or statutory rights of the
indemnitee(s) which would otherwise exist as to such indemnitee(s).
Contractor's indemnity under this Section shall be without regard to and without any right to
contribution from any insurance maintained by City.
Should any indemnitee described herein be required to bring an action against the Contractor
to assert its right to defense or indemnification under this Agreement or under the Contractor's
applicable insurance policies required below the indemnitee shall be entitled to recover reasonable
costs and attorney fees incurred in asserting its right to indemnification or defense but only if a
court of competent jurisdiction determines the Contractor was obligated to defend the claim(s) or
was obligated to indemnify the indemnitee for a claim(s) or any portion(s) thereof.
In the event of an action filed against City resulting from the City's performance under this
Agreement, the City may elect to represent itself and incur all costs and expenses of suit.
Contractor also waives any and all claims and recourse against the City or its officers, agents
or employees, including the right of contribution for loss or damage to person or property arising
from, growing out of, or in any way connected with or incident to the performance of this
Professional Services Agreement for Impervious Surface Data Collection
FY 2015
Page 3 of 10
Agreement except "responsibility for his own fraud, for willful injury to the person or property of
another, or for violation of law, whether willful or negligent" as per 28-2-702, MCA.
These obligations shall survive termination of this Agreement and the services performed
hereunder.
In addition to and independent from the above, Contractor shall at Contractor's expense
secure insurance coverage through an insurance company or companies duly licensed and
authorized to conduct insurance business in Montana which insures the liabilities and obligations
specifically assumed by the Contractor in this Section. The insurance coverage shall not contain any
exclusion for liabilities specifically assumed by the Contractor in subsection (a) of this Section.
The insurance shall cover and apply to all claims, demands, suits, damages, losses, and
expenses that may be asserted or claimed against, recovered from, or suffered by the City without
limit and without regard to the cause therefore and which is acceptable to the City and Contractor
shall furnish to the City an accompanying certificate of insurance and accompanying endorsements
in amounts not less than as follows:
Workers' Compensation — statutory;
Employers' Liability - $1,000,000 per occurrence; $2,000,000 annual aggregate;
Commercial General Liability - $1,000,000 per occurrence; $2,000,000 annual
aggregate;
Automobile Liability - $1,000,000 property damage/bodily injury; $2,000,000
annual aggregate; and
Professional Liability - $1,000,000 per claim; $2,000,000 annual aggregate.
The above amounts shall be exclusive of defense costs. The City of Bozeman, its officers,
agents, and employees, shall be endorsed as an additional or named insured on a primary non-
contributory basis on both the Commercial General and Automobile Liability policies. The
insurance and required endorsements must be in a form suitable to City and shall include no less
than a sixty (60) day notice of cancellation or non -renewal. The City must approve all insurance
coverage and endorsements prior to the Contractor commencing work. Contractor shall notify City
within two (2) business days of Contractor's receipt of notice that any required insurance coverage
will be terminated or Contractor's decision to terminate any required insurance coverage for any
reason.
The City must approve all insurance coverage and endorsements prior to the
Contractor commencing work.
Professional Services Agreement for Impervious Surface Data Collection
FY 2015
Page 4 of 10
8. Termination for Contractor's Fault:
a. If Contractor refuses or fails to timely do the work, or any part thereof, or
fails to perform any of its obligations under this Agreement, or otherwise breaches any terms
or conditions of this Agreement, the City may, by written notice, terminate this Agreement
and the Contractor's right to proceed with all or any part of the work ("Termination Notice
Due to Contractor's Fault"). The City may then take over the work and complete it, either
with its own resources or by re -letting the contract to any other third party.
b. In the event of a termination pursuant to this Section 8, Contractor shall be
entitled to payment only for those services Contractor actually rendered.
C. Any termination provided for by this Section 8 shall be in addition to any
other remedies to which the City may be entitled under the law or at equity.
d. In the event of termination under this Section 8, Contractor shall, under no
circumstances, be entitled to claim or recover consequential, special, punitive, lost business
opportunity, lost productivity, field office overhead, general conditions costs, or lost profits
damages of any nature arising, or claimed to have arisen, as a result of the termination.
9. Termination for City's Convenience:
a. Should conditions arise which, in the sole opinion and discretion of the City,
make it advisable to the City to cease performance under this Agreement City may terminate
this Agreement by written notice to Contractor ("Notice of Termination for City's
Convenience"). The termination shall be effective in the manner specified in the Notice of
Termination for City's Convenience and shall be without prejudice to any claims that the
City may otherwise have against Contractor.
b. Upon receipt of the Notice of Termination for City's Convenience, unless
otherwise directed in the Notice, the Contractor shall immediately cease performance under
this Agreement and make every reasonable effort to refrain from continuing work, incurring
additional expenses or costs under this Agreement and shall immediately cancel all existing
orders or contracts upon terms satisfactory to the City. Contractor shall do only such work
as may be necessary to preserve, protect, and maintain work already completed or
immediately in progress.
Professional Services Agreement for Impervious Surface Data Collection
FY 2015
Page 5 of 10
C. In the event of a termination pursuant to this Section 13, Contractor is
entitled to payment only for those services Contractor actually rendered on or before the
receipt of the Notice of Termination for City's Convenience.
d. The compensation described in Section 13(c) is the sole compensation due to
Contractor for its performance of this Agreement. Contractor shall, under no circumstances,
be entitled to claim or recover consequential, special, punitive, lost business opportunity,
lost productivity, field office overhead, general conditions costs, or lost profits damages of
any nature arising, or claimed to have arisen, as a result of the termination.
10. Limitation on Contractor's Damages, Time for Asserting Claim:
a. In the event of a claim for damages by Contractor under this Agreement,
Contractor's damages shall be limited to contract damages and Contractor hereby expressly
waives any right to claim or recover consequential, special, punitive, lost business
opportunity, lost productivity, field office overhead, general conditions costs, or lost profits
damages of any nature or kind.
b. In the event Contractor wants to assert a claim for damages of any kind or
nature, Contractor shall provide City with written notice of its claim, the facts and
circumstances surrounding and giving rise to the claim, and the total amount of damages
sought by the claim, within ten (10) days of the facts and circumstances giving rise to the
claim. In the event Contractor fails to provide such notice, Contractor shall waive all rights
to assert such claim.
11. Representatives:
a. City's Representative: The City's Representative for the purpose of this
Agreement shall be Jon Henderson (GIS Manager) or such other individual as City shall
designate in writing. Whenever approval or authorization from or communication or
submission to City is required by this Agreement, such communication or submission shall
be directed to James Goehrung as the City's Representative and approvals or authorizations
shall be issued only by such Representative; provided, however, that in exigent
circumstances when City's Representative is not available, Contractor may direct its
communication or submission to other designated City personnel or agents as listed above
and may receive approvals or authorization from such persons.
b. Contractor's Representative: The Contractor's Representative for the
Professional Services Agreement for Impervious Surface Data Collection
FY 2015
Page 6 of 10
purpose of this Agreement shall be Luiz Cortes (General Manager) or such other individual
as Contractor shall designate in writing. Whenever direction to or communication with
Contractor is required by this Agreement, such direction or communication shall be directed
to Contractor's Representative; provided, however, that in exigent circumstances when
Contractor's Representative is not available, City may direct its direction or communication
to other designated Contractor personnel or agents.
12. Permits: Contractor shall provide all notices, comply with all applicable laws,
ordinances, rules, and regulations, obtain all necessary permits, licenses, including a City of
Bozeman business license, and inspections from applicable governmental authorities, and pay all
fees and charges in connection therewith.
13 Laws and Regulations: Contractor shall comply fully with all applicable state and
federal laws, regulations, and municipal ordinances including, but not limited to, all workers'
compensation laws, all environmental laws including, but not limited to, the generation and disposal
of hazardous waste, the Occupational Safety and Health Act (OSHA), the safety rules, codes, and
provisions of the Montana Safety Act in Title 50, Chapter 71, MCA, all applicable City, County,
and State building and electrical codes, the Americans with Disabilities Act, and all non-
discrimination, affirmative action, and utilization of minority and small business statutes and
regulations.
14. Nondiscrimination: The Contractor will have a policy to provide equal
employment opportunity in accordance with all applicable state and federal anti -discrimination
laws, regulations, and contracts. The Contractor will not refuse employment to a person, bar a
person from employment, or discriminate against a person in compensation or in a term, condition,
or privilege of employment because of race, color, religion, creed, political ideas, sex, age, marital
status, national origin, actual or perceived sexual orientation, gender identity, physical or mental
disability, except when the reasonable demands of the position require an age, physical or mental
disability, marital status or sex distinction. The Contractor shall be subject to and comply with Title
VI of the Civil Rights Act of 1964; Section 140, Title 2, United States Code, and all regulations
promulgated thereunder. The Contractor shall require these nondiscrimination terms of its sub -
Contractors providing services under this agreement.
15. Intoxicants; DOT Drug and Alcohol Regulations/Safety and Training:
Contractor shall not permit or suffer the introduction or use of any intoxicants, including alcohol or
illegal drugs, by any employee or agent engaged in services to the City under this Agreement while
on City property or in the performance of any activities under this Agreement. Contractor
acknowledges it is aware of and shall comply with its responsibilities and obligations under the U.S.
Professional Services Agreement for Impervious Surface Data Collection
FY 2015
Page 7 of 10
Department of Transportation (DOT) regulations governing anti-drug and alcohol misuse
prevention plans and related testing. City shall have the right to request proof of such compliance
and Contractor shall be obligated to fumish such proof.
The Contractor shall be responsible for instructing and training the Contractor's employees
and agents in proper and specified work methods and procedures. The Contractor shall provide
continuous inspection and supervision of the work performed. The Contractor is responsible for
instructing his employees and agents in safe work practices.
16. Modification and Assignability: This Agreement may not be enlarged, modified or
altered except by written agreement signed by both parties hereto. The Contractor may not
subcontract or assign Contractor's rights, including the right to compensation or duties arising
hereunder, without the prior written consent of City. Any subcontractor or assignee will be bound
by all of the terms and conditions of this Agreement.
17. Reports/Accountability/Public Information: Contractor agrees to develop and/or
provide documentation as requested by the City demonstrating Contractor's compliance with the
requirements of this Agreement. Contractor shall allow the City, its auditors, and other persons
authorized by the City to inspect and copy its books and records for the purpose of verifying that the
reimbursement of monies distributed to Contractor pursuant to this Agreement was used in
compliance with this Agreement and all applicable provisions of federal, state, and local law. The
Contractor shall not issue any statements, releases or information for public dissemination without
prior approval of the City.
18. Non -Waiver: A waiver by either party any default or breach by the other party of
any terms or conditions of this Agreement does not limit the other party's right to enforce such term
or conditions or to pursue any available legal or equitable rights in the event of any subsequent
default or breach.
19. Attorney's Fees and Costs: That in the event it becomes necessary for either Party
of this Agreement to retain an attorney to enforce any of the terms or conditions of this Agreement
or to give any notice required herein, then the prevailing Party or the Party giving notice shall be
entitled to reasonable attorney's fees and costs, including fees, salary, and costs of in-house counsel
to include City Attorney.
20. Taxes: Contractor is obligated to pay all taxes of any kind or nature and make all
appropriate employee withholdings.
Professional Services Agreement for Impervious Surface Data Collection
FY 2015
Page 8 of 10
21. Dispute Resolution:
a. Any claim, controversy, or dispute between the parties, their agents,
employees, or representatives shall be resolved first by negotiation between senior -level
personnel from each party duly authorized to execute settlement agreements. Upon mutual
agreement of the parties, the parties may invite an independent, disinterested mediator to
assist in the negotiated settlement discussions.
b. If the parties are unable to resolve the dispute within thirty (30) days from the
date the dispute was first raised, then such dispute may only be resolved in a court of
competent jurisdiction in compliance with the Applicable Law provisions of this Agreement.
22. Survival: Contractor's indemnification shall survive the termination or expiration of
this Agreement for the maximum period allowed under applicable law.
23. Headings: The headings used in this Agreement are for convenience only and are
not be construed as a part of the Agreement or as a limitation on the scope of the particular
paragraphs to which they refer.
24. Severability: If any portion of this Agreement is held to be void or unenforceable,
the balance thereof shall continue in effect.
25. Applicable Law: The parties agree that this Agreement is governed in all respects
by the laws of the State of Montana.
26. Binding Effect: This Agreement is binding upon and inures to the benefit of the
heirs, legal representatives, successors, and assigns of the parties.
27. No Third -Party Beneficiary: This Agreement is for the exclusive benefit of the
parties, does not constitute a third -party beneficiary agreement, and may not be relied upon or
enforced by a third party.
28. Counterparts: This Agreement may be executed in counterparts, which together
constitute one instrument.
29. Integration: This Agreement and all Exhibits attached hereto constitute the entire
Professional Services Agreement for Impervious Surface Data Collection
FY 2015
Page 9 of 10
agreement of the parties. Covenants or representations not contained therein or made a part thereof
by reference, are not binding upon the parties. There are no understandings between the parties
other than as set forth in this Agreement. All communications, either verbal or written, made prior
to the date of this Agreement are hereby abrogated and withdrawn unless specifically made a part of
this Agreement by reference.
END OF AGREEMENT EXCEPT FOR SIGNATURES ****
IN WITNESS WHEREOF, the parties hereto have executed this instrument the day and
year first above written.
CITY OF BOZEMAN, MONTANA
BY
Chris Kukulski, City Manager
APPROVED AS TO FORM:
By
Greg llivan, Bozeman City Attorney
The Sanborn Map Company, Inc.
By / (/
Jtiz Cortes, General Manager
Professional Services Agreement for Impervious Surface Data Collection
FY 2015
Page 10 of 10
Sanborn
August 14,2014
Jon Henderson - GIS Manager
City of Bozeman
20 East Olive
Bozeman Mt - 59718
406) 582-2250
ihendeison(& bozeman.net
Corporate Headquarters
1935 Jamboree Drive
Suite 100
Colorado Springs. CO 80920
Phone: 719.593.0093
Toll -Free: 1.866.726.2676
Fax: 719.528.5093
www.sanborn,com
Re: Scope of Work and Cost for Professional Service for development of parcel rectification & impervious
surface data collection for the City of Bozeman
Dear Mr. Henderson
The Sanbom Map Company, Inc. (Sanbom) understands that the City of Bozeman is requesting the services of a
professional mapping company to provide photograrnmetric mapping collection of impervious surface data and
parcel polygon rectification, for the City of Bozeman; using aerial images collected and processed by Sanbom in
2012. It is our pleasure to respond to this request. Sanborn has the aerial images in its archive tapes, ready for
internal use and can start work as soon as given approval from the Cityto start the project. This work will be
performed under the direct supervision of a ASPRS Certified Photogrammetrist.
SCOPE OF WORK
Project Area
The areas to be mapped are outlined in Attachment -A. These limits are based on shapefiles provided by you on
August 6, 2014. It encompasses the city limit boundary as shown in Figure -1, where impervious surface data is to be
collected for an area of 20 Sq. Mi.; and a larger area, as indicated on figure -2, covering 24,995 polygons that
represents the parcels to rectified for an area of about 40 Sq.Mi.
Technical Approach
Our proposal is to perform the collection of impervious surface data using stereo photogrammetric means utilizing
the existing aerial photography, flown by Sanbom during spring 2012. Sanbom will recover the final orrhophoto
files, processed with 6 -in resolution, and use them as source for the rectification and adjustment of the vectors
representing the polygons for the parcels. The final mapping will conform to National Map Accuracy Standards for
1"=100'scale
Aerial Photography and Image orientation - Existing Aerials
The aerial photos to be used for the project were collected on May 12, 2012. Sanbom will recover all the digital files
from the previous project, including all aerial images, ground control point information, aerotriangulation results
and the final orthophotos, which were produced with 6 -in resolution and conforming to National Map Accuracy
Standards for 1" =100' scale.
The aerial images and aerotriangulation files will be used to setup stereo -models for 3D interpretation and accurate
collection of impervious surface.
The digital orthophotos will be used to overlaythe existing parcels and to adjust the vectors based on features
interpretation.
Mr. Henderson Page 2 of 7
August 14, 2014
Re: Scope of Work and Cost for development of parcel rectification & impervious surface data collection
Planimetric Mapping for Impervious Surfaces
Impervious surface" refers to all hard surfaces and pavements like paved roads, parking lots, roofs, driveways,
patios and sidewalk, including buildings structures with rooftop; that are covered by impenetrable materials such
as asphalt, concrete and brick The problem with impervious surfaces is that they prevent the natural soaking of
rainwater into the ground and slowly seeping into streams. Instead, the rain water accumulates and flows rapidly
into storm drains.
Sanborn has extensive experience extracting planimetric data from aerial imagery for use in creating GIS data layers
using photogrammetric techniques. One of the uses for the Planimetric mapping is for computation of impervious
surfaces. Sanborn will compile all structure and pavements that defines the surface as impervious causing rain run-
off.
Feature Compilation
The City of Bozeman will provide Sanborn with any -existing planimetric mapping that
the city already has in the GIS database, which can be used for update.
Sanborn will define the attributes to add to the polygon features and data to be collected.
To speed up the collection of all features within the project area, Sanborn will sub-
contract the services of Genesys International Corp, a partner of Sanborn that has
successfully performed similar services in previous projects. Sanborn will be responsible
for preparation of the data and coordination, quality control and assurance of accuracy
and completeness of the mapping.
Features will be extracted from the controlled aerial imagery in a 3D stereoscopic environment, utilizing first -order
softcopy workstations operated by photogrammetrists experienced in photo interpretation, to create the planimetric
database. The use of softcopy workstations utilizing stereo superimposition technology (planimetric features traced
in vector form directly over the top of stereoscopic imagery displayed on the computer monitor) ensures accurate
and complete collection of all mapped features. This approach of 3D collection, not only provides clear
interpretation and an accurate horizontal position for the plarrimetric features, it also provides accurate elevation
data where needed.
Unless a ground feature is obscured bytrees, shadows, roof ovehangs, vehicle parked or other objects, all visible
features possibly of interpretation and distinction in the 6inches resolution images will be collected.
During the compilation, vector lines will be collected stereoscopically with ending points and nodes of intersected
lines being "snapped" / tied and coincident. Level of hierarchy will be determined for the features listed in data
dictionary, where for example, buildings and roads will take precedent over driveways and parking areas. Driveways,
Parking areas and pools will take precedent over sidewalks and concrete pads, which will take priority over unpaved
roads. In doing so, there will be no duplication of lines that defines each feature. Once all boundary limits of the
features is defined and collected by all surrounding type of planimetric features being represented, a centroid/point
will be placed at near center of the area, with specific attribute definition of the feature. As sample to clarify the
procedure: a driveway will be collected at its edge, snapped at the building polygon and snapped at road, where it
meets the edge of pavement. Operator then selects the customized button that defines "driveway centroid and a
point is dropped/placed anywhere inside the area that defines that driveway. Same is done for all sidewalks, parking
lot etc. Buildings and structures will be collected as closed polygon and a centroid is not necessary then. The
centroid will be the source of information for the later task of creating the polygon for each feature.
Mr. Henderson Page 3 of 7
August 14, 2014
Re: Scope of Work and Cost for development of parcel rectification & impervious surface data collection
Interactive Graphic Editing & Topological Structuring of Data
Graphic editing procedures involve a combination of interactive and customized checks to
ensure that the data is canographicallycorrect and aesthetically pleasing, connectivityof
linework is complete, and specific layers of line topology are generated. A variety of topology
checks are performed to ensure that all features defined as being topologically structured have
no snapping errors (overshoots/undershoots). Polygon topology is created, attribution of
features takes lace and edge -match checking between different files of sets of stereo -models
SAM
a p ,
is performed. During the topology check, polygons will be defined by the vector lines that defines each area in the
file and its associated centroid will be used to define polygon attributions. "Empty' polygons and/or polygons with
two or more centroids will be investigated for correction of either missing centroid identification or check the need
for closer of polygon where gaps may still existing between the vector lines that define the feature.
Layers, Feature Code, Attributes and Type:
Before compilation of planimetric features begins, Sanborn will coordinate with the City of Bozeman to define all
the features and attributes to be collected and incorporated on final deliveries. All impervious data will be create as
polygon type feature. No annotation is planned to be included, unless specified. Sanborn will format all data layers
as a detailed data dictionary and present to the city for final approval. Each polygon feature will have a set of
attributes as defined below.
Polygon Area
Feature Code / name
Feature ID / number
Photo Date (05/12/2012)
Source update (six -inches aerial image)
User name (Sanbom)
Following is a list of proposed features to be
collected.
Building Footprint (minimum 10'x 10)
o Residential
o Commercial
o Courtyard
o Shed / storage / detached garage
o Storage tank
Paved Roads (double line streets)
o Excluding pervious meWant viand
Paved Areas
o Paved driveways
o Paved Parking lot
o Bridges
o Median (>10ft)
o Paved Alleys
o Airport Runway/Taxiway
o Recreation Coun/Ball field
o Public Sidewalks (parallel to the road)
o Walkways/sidewalk inside commercial areas (parking lot, schools, churches, shopping area)
o Conc_pad (minimum 5'x 5)
o Other paved areas
Golf -course pathway
Pools (in ground only)
Patios (covered / uncovered)
Mr. Henderson Page 4 of 7
August 14, 2014
Re: Scope of Work and Cost for development of parcel rectification & impervious surface data collection
Parcel Mapping:
The parcel rectification and adjustment will be performed overlaying the existing vector on top of the 2012 digital
orthophoto. The parcels will be grouped into functional groups and migrated to new locations based on the aerial
images. The migration will minimally alter the geometry or area of the parcels, if at all. The entire project process
will first be applied to a pilot area mutually agreed up during the kick-off meeting. As soon as the parcel rectification
of the pilot area is complete, the remainder of the area will begin. When selecting the initial area, Sanborn will
increase the initial area, if necessary, to ensure that parcels are selected from a blocks that represent the layout of the
city adequately. These selected parcels will be the fust to be rectified and will be delivered to the city as a sample
dataset within less than 2 weeks after project initiation.
Develop a Rectified Digital Overlay of the City's Parcel Feature Class
Sanborn will sub -contract the service of RMSI Private Limited, a partner of Sanborn that has successfully
performed similar services in previous projects in Colorado. Sanborn will be responsible for preparation of the data
and coordination, quality control and assurance of accuracy and completeness of adjustment of all parcels. The
rectification of the parcels will involve following steps:
1. Street Centerline Comparison: This step involves comparing the street centerlines in the parcel layer with
those in the target landbase. Sanborn will accomplish this by -creating a source centerline from the parcel layer and a
target centerline from the orthophotos and conflating the road centerline in the source database to the more
accurate version of the same layer in a target landbase.
2. Group Assignment: An automated method to create groups for rectification has been developed for this task
The method is as follows:
Create a robust set of control pairs and TIN that reflect the amount of repositioning (vector length and
direction) that is required by matching the source and target landbase layers
Compare these control pans in terms of length and direction to identify islands of similar control pairs
Create polygons that reflect relative uniformity of control pair length and direction within each polygon.
Replace each control pair in each polygon with one standardized control pair that represents the average for
each polygon
The result of this process will be a set of group polygons with a single control pair representing the required
repositioning for all parcels contained in the polygon.
3. Parcel Group Translation: The aforementioned control pairs will be applied to the entire set of source
objects using automated proprietary programs.
4. Fit Evaluation and Quality Control: Sanborn will check the relative position of the resulting repositioned
objects using a sophisticated proprietary QC program that flags all problem areas. Every flagged parcel will be
reviewed and, where possible, we will manually reposition all parcel nodes that are not within the project specified
distortion tolerance. At this point, we will also assign each parcel with a Fit Quality rating on a three point scale,
defined as follows:
Fit Quality 1: The placement is believed to be accurate and correct. Upon preliminary review of a sample
of the data, we believe that 75% of the parcels would fall into this category.
Fit Quality 2: The placement is relatively correct, but there are (or may be) some errors that should be
reviewed. We believe that 15% of the parcels would fall into this category.
Fit Quality 3: The placement has major issues or we were unable to identify the proper location of the
parcel. We believe that 10% of the parcels would fall into this category.
Mr. Henderson Page 5 of 7
August 14, 2014
Re: Scope of Work and Cost for development of parcel rectification & impervious surface data collection
The Fit Quality of each parcel will be assigned in an attribute field in the geodatabase that will ultimately be
delivered to the City.
Following the manual repair and fit quality evaluation, Sanborn will rerun the QC Program and repeat the process
until all objects meet the specifications. The findings will be documented in a statistical summary report included in
the data deliverable package to facilitate client QC review. Also included in the report, will be a log of all
transformations that were applied to each parcel, by node.
Deliverable Products
A Polygon Shapefile with all impervious dataset and attributes, with its respective "prj" file, in UTM zone
12, NAD83/2011, in meter.
A Polygon Shapefile with all adjusted parcels and attributes, with its respective "prj" file, in UrM zone 12,
NAD83/2011, in meter.
SCHEDULE
Upon acceptance of this proposal, Sanborn will recover the existing aerial images, orthophotos and
aerotriangulation results.
Schedule is considering an agreement and notice to proceed is in place by:........... 9/8
o Set of pilot files will be delivered within 3 -weeks: ... ... ... ... ... ... ... ... ... ... 9/29
o Final Impervious mapping will be completed in Tweeks:........................ 10/27
o Parcel Mapping will be completed within 3 -months: ... ... ... ... ... ... ... ... ... 12/08
COST
Sanborn's price to provide these services is a total of $ 48,400.00.
Project Manager Point of Contact
Luiz Cones
General Manager
The Sanborn Map Company, Inc.
6701 Carmel Road, Suite# 301
Charlotte, NC 28226
Mr. Henderson Page 6 of 7
August 14, 2014
Re: Scope of Work and Cost for development of parcel rectification & impervious surface data collection
ATTACHMENT - A
City of Bozeman, MT - 2014 Mapping
Impervious Surface Collection - 20 Square Miles
Miles
Figure -1
Mr. Henderson Page 7 of 7
August 14, 2014
Re: Scope of Work and Cost for development of parcel rectification & impervious surface data collection
City of Bozeman, MT - 2014 Mapping ((
Parcel -24,995 Polygons -40 Square Miles °Y¢
Miles
Figure -2