HomeMy WebLinkAbout019_L2.1_LandscapeDetailsPRELIMINARY - FOR REVIEWFILE:PROJECT NO:CAD:QUALITY ASSURANCE:DRAWING HISTORYDATE DESCRIPTION915 HIGHLAND BOULEVARDLANDSCAPE DETAILSENABLING SITE WORKBOZEMAN HEALTHBOZEMAN, MTL2.1 RPE17095.16_LS_DETAILS.DWGDME06/22/2026SITE PLAN SUBMITTAL--------------17095.16SHRUB PLANTING
N.T.S.
NOTES:
1.SHRUBS WITH BROKEN OR CRUMBLING ROOT BALLS WILL BE REJECTED. CONTAINER
REMOVAL WILL NOT BE AN EXCUSE FOR DAMAGED ROOT BALLS.
2.TOP OF MULCH TO BE 1" BELOW ADJ WALKWAY, CURB, EDGING, OR OTHER SURFACE.
3.PRUNE OUT ALL DAMAGED OR DEAD WOOD.
4.ALL PLANT MATERIAL TO BE INSPECTED UPON DELIVERY. REJECTED MATERIALS TO BE
IMMEDIATELY RETURNED TO SOURCE.
6.RAKE SUBGRADE AND REMOVE ALL DEBRIS GREATER THAN 1/2" IN DIA. INCLUDING ROCKS,
CONCRETE, ORGANIC DEBRIS, AND OR CONSTRUCTION DEBRIS.
TOP OF ROOT BALL
SHALL BE 1-2" ABOVE
SURROUNDING GRADE
3" DEPTH MULCH, KEEP
MULCH AWAY FROM TRUNK
REMOVE CONTAINER,
LIGHTLY SCARIFY
ROOTS
BACKFILL WITH 75%
NATIVE SOIL, 25%
COMPOST
1
ROCK MULCH
WEED BARRIER FABRIC
NEW TOPSOIL
EXISTING SUBGRADE3"ROCK MULCH
N.T.S.2 N.T.S.
AMENDED EXISTING NATIVE
TOPSOIL, REMOVE ALL LARGE
DEBRIS AND ROCKS OVER 12"
EXISTING VEGETATION
NOTES:
1.EXISTING TOPSOIL WILL BE PLACED BY SITE WORK CONTRACTOR TO ROUGH GRADE.
2.LANDSCAPE CONTRACTOR SHALL AMEND SOIL ACCORDING TO SOIL TEST ANALYSIS AT A
MINIMUM OF 6" DEPTH.
3.LANDSCAPE CONTRACTOR SHALL BE RESPONSIBLE FOR ALL FINAL GRADING AND SEEDING
PREPARATION.
SEEDED AREA
SEEDING3
CONCRETE FOOTING
TENSION WIRE
FENCE FABRIC. 9 GA. 2" MESH
TENSION BAR
FENCE POSTS 8' O.C
TOP RAIL CONTINUOUS 1-5/8"
RAIL END BRACKET
END POST TOP
VARIES- SEE PLANS12"FROST DEPTHFABRIC 'KNUCKLED' AND INSTALLED NO LOWER
THAN 1/2 WAY UP TOP RAIL FOR SAFETY PURPOSE.
FENCE SECTION/ELEVATION
CHAIN LINK FENCE
N.T.S.
VARIOUS SURFACE CONDITIONS SEE
LANDSCAPE PLAN
SLOPE TO DRAIN
SECTION ELEVATION
4
GATE POST
FINISH GRADE
LOCKABLE
SAFETY LATCH
PIPE BRACES
FRAME MEMBER
METAL GATE POST
HINGE BOLT
HINGE BOLT
CONCRETE FOOTING
CONCRETE CENTER REST
FOOT BOLT
DOUBLE HINGE GATE12"FROST DEPTH8" MIN.18"24.00'3.00'NOTES:
1.CONTRACTOR SHALL SUBMIT SHOP DRAWING OR CUT
SHEETS FOR REVIEW AND APPROVAL PRIOR TO
INSTALLATION
2.DETAIL IS FOR DESIGN INTENT ONLY.
3.GATES SHALL BE 3' X 12' DOUBLE HINGE DRIVE GATES,
GALVANIZED CHAINLINK.DOUBLE HINGE GATE
N.T.S.5
P:\17095_16_Bozeman_Health_ED_&_BT_Expansion\CADD_C3D\PRODUCTION_DWG\17095.16_LS_DETAILS.dwg, C4.1, 6/22/2026 8:13:23 AM, amartoncik, 1:1