The URL can be used to link to this page

Home My WebLink About013 - Appendix I.1 - SITE LIGHTING CUTBOOKKB6-LED BOLLARDS Page 1 of 6 Rev 04/18/24 aal_kb6_spec_R02 currentlighting.com/aal © 2022-2024 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. FEATURES DATE:LOCATION: TYPE:PROJECT: HOUSING• Housing shroud shall be extruded 6061-T6 aluminum alloy with a welded top cap that shall be free of any visible weld or grind marks • Luminaire housing shall be free of any visible heat fins, hardware or fasteners. • Bracketry shall be aluminum and hardware shall be stainless steel. • Housing shall be independently field rotatable of the optical distribution. • Default factory orientations of shielding location relative to the optical system shall be: • A - Street Side C - House SideLED/Optics LED/OPTICS• LEDs shall be mounted to a metal printed circuit board assembly (MCPCB). • Optical lenses shall be clear injection molded PMMA acrylic. • House side shield shall be field installable on any face of the housing. • Light engine and optical distributions shall be field rotatable. INSTALLATION • Anchor bolts and anchor bolt template shall be included. • Service access to the driver assembly shall require a 3/16" hex driver (information provided by engineering) to loosen (4) stainless steel set screws to allow the housing to be removed for access to the gear compartment. Gear compartment shall require a Philips driver (information provided by engineering) to open service panel. CERTIFICATIONS• Luminaire shall be listed with UL for outdoor, wet location use, UL1598, UL 8750 and Canadian CSA Std. C22.2 no.250. • IDA approved, 3000K and warmer CCTs only. • This product qualifies as a “designated country construction material” per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 6/06/2020. WARRANTY• 5 year warranty SPECIFICATIONS INSTALLATION (CONTINUED)• Driver assembly shall be mounted to a prewired internal tray with quick disconnects for removal. ELECTRICAL• Luminaires shall have integral surge protection that shall be U.L. recognized and have a surge current rating of 10,000 Amps using the industry standard 8/20uSec wave and surge rating of 372J. • Drivers shall be U.L recognized. • 100%-1% dimming range. Fixture will be wired for low voltage 0-10V dimming control • Luminaire shall be capable of operating at 100% power in a 40° ambient environment. Both driver and optical array shall have integral thermal protection that shall dim the luminaire upon detection of fixture temperatures in excess of 85°C. • Luminaires not configured with an optional control system shall be provided with 0-10V purple and gray dimming leads. CONTROLS• Wireless enabled fixtures shall support bi-directional radio frequency (RF) communications utilizing IEEE 802.15.4 operating in the 2.4GHZ ISM band. • Up to 1000' wireless range may be reduced by physical obstructions between lighting fixtures. KEY DATA Lumen Range 7,744–18,763 Wattage Range 87–173 Efficacy Range (LPW)79–119 Weight 20 lbs 9.07 kg EPA 1.4 CATALOG #: Kick Bollard KICK™ • Sensor and wireless operation • Field rotatable optics and housing • Customizable side panels • True IES Type 2, 3, 4, 5 distributions • 3000K, 4000K, 5000K CCT • Integral thermal protection 3000K and warmer CCTs only continued on page 3FixtureHousing1 mA Max Gray Dimming Lead (-) Standard Input Black (+) White (-) Green (GND) Purple Dimming Lead (+) CONTROL TECHNOLOGY KB6-LED BOLLARDS Page 2 of 6 Rev 04/18/24 aal_kb6_spec_R02 currentlighting.com/aal © 2022-2024 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. ORDERING GUIDE Example: KB6-LED-Y2-B-2040-347-BLT CATALOG # DATE:LOCATION: TYPE:PROJECT: CATALOG #: Voltage Fixture Finish 120-277V 120-277 input standard or you may choose one 347 347 VAC input 480 480 VAC input BLS Black Gloss Smooth BLT Black Matte Textured DBS Dark Bronze Gloss Smooth DBT Dark Bronze Matte Textured GTT Graphite Matte Texture LGS Light Grey Gloss Smooth LGT Light Grey Matte Textured PSS Platinum Silver Gloss Smooth VGT Verde Green Matte Textured WHS White Gloss Smooth WHT White Matte Textured CC Custom Color 2 Model Distribution Shielding Light Engine 1 Control (may choose one) KB6-LED 6" Square x 42" OAH Bollard Y2 IES Type II Clear Lens Y3 IES Type III Clear Lens Y4 IES Type IV Clear Lens Y5 IES Type V Clear Lens YD Symmetric distribution, diffused lens Optional, may choose from 1 to 3 sides closed from options A, B, C, D or you may choose HSS option. Refer to page 4 for additional information A Short side closed B Side 90° counterclockwise from short side closed C Side 180° counterclockwise from short side closed D Side 270° counterclockwise from short side closed HSS House side shield 1030 3000K CCT, CRI 70, 14 watts 1040 4000K CCT, CRI 70, 14 watts 1050 3000K CCT, CRI 70, 14 watts 2030 3000K CCT, CRI 70, 29 watts 2040 4000K CCT, CRI 70, 29 watts 2050 5000K CCT, CRI 70, 29 watts WIR LightGRID+ connectivity BPC Button Type Photocell Notes: 1 Consult factory for the following options: 560nm monochromatic amber, 2700K 80 CRI, Custom Lumen Packages 2 Consult factory for custom color, marine and corrosive finish KB6-LED BOLLARDS Page 3 of 6 Rev 04/18/24 aal_kb6_spec_R02 currentlighting.com/aal © 2022-2024 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. DELIVERED LUMENS System Watts Output Closed Sides IES Type Distribution Optional Shielding 3000K 70CRI 4000K 70CRI 5000K 70CRI Lumen Bug Rating Efficancy (Lm/W)Lumen Bug Rating Efficancy (Lm/W)Lumen Bug Rating Efficancy (Lm/W)Shielding Equivalent B U G B U G B U G 15 Assymetric (none) Type 2 Y2 (none)-1281 1 0 1 92 1294 1 0 1 92 1323 1 0 1 95 Type 3 Y3 (none)-1192 1 0 1 85 1204 1 0 1 86 1233 1 0 1 88 Type 4 Y4 (none)-1183 1 0 2 85 1195 0 0 1 85 1222 0 0 1 87 1 Side Type 2 Y2 C HSS 1187 1 0 2 85 1199 1 0 1 86 1226 1 0 1 88 Type 3 Y3 C HSS 1092 1 0 1 78 1103 0 0 1 79 1128 0 0 1 81 Type 4 Y4 C HSS 1105 1 0 2 79 1116 0 0 1 80 1141 0 0 1 82 -Y5 C A / B / D 897 1 0 1 64 906 1 0 1 65 926 1 0 1 66 YD C A / B / D 350 0 3 1 25 373 0 3 1 27 373 0 3 1 27 2 Sides(adjacent)-Y5 BC AB / CD / AD 620 1 0 1 44 626 0 0 1 45 640 0 0 1 46 YD BC AB / CD / AD 236 0 3 1 17 251 0 3 1 18 251 0 3 1 18 3 Sides(adjacent)-Y5 BCD ABC / ABD / ACD 307 0 0 1 22 310 0 0 1 22 317 0 0 1 23 YD BCD ABC / ABD / ACD 57 0 0 1 4 61 0 0 1 4 61 0 0 1 4 Symmetric (none)Type 5 Y5 (none)-1098 2 0 1 78 1189 1 0 1 85 1179 1 0 1 84 YD (none)-478 0 3 4 34 509 0 3 1 36 509 0 3 1 36 2 Sides(opposing)-Y5 AC BD 593 1 0 1 42 599 1 0 1 43 612 1 0 1 44 YD AC BD 233 0 3 1 17 248 0 3 1 18 248 0 3 1 18 30 Assymetric (none) Type 2 Y2 (none)-2289 1 0 1 76 2302 1 0 1 77 2451 1 0 2 76 Type 3 Y3 (none)-2153 1 0 1 72 2165 1 0 1 72 2305 1 0 1 72 Type 4 Y4 (none)-2108 1 0 2 70 2120 1 0 2 71 2257 1 0 2 70 1 Side Type 2 Y2 C HSS 2199 1 0 2 73 2221 1 0 1 74 2271 1 0 2 73 Type 3 Y3 C HSS 2041 1 0 1 68 2066 1 0 1 69 2107 1 0 1 68 Type 4 Y4 C HSS 2041 1 0 2 68 2061 1 0 2 69 2107 1 0 2 68 -Y5 C A / B / D 1645 1 0 1 55 1662 1 0 1 55 1699 1 0 1 55YDCA / B / D 634 0 3 1 21 685 0 3 1 23 679 0 3 1 21 2 Sides(adjacent)-Y5 BC AB / CD / AD 1138 1 0 1 38 1149 1 0 1 38 1175 1 0 1 38 YD BC AB / CD / AD 427 0 3 1 14 461 0 3 1 15 457 0 3 1 14 3 Sides(adjacent)-Y5 BCD ABC / ABD / ACD 581 0 0 1 19 568 0 0 1 19 581 0 0 1 19 YD BCD ABC / ABD / ACD 104 0 0 1 3 112 0 0 1 4 111 0 0 1 3 Symmetric (none)Type 5 Y5 (none)-1978 2 0 1 66 2188 2 0 1 73 2163 2 0 1 66YD(none)-866 0 3 4 29 935 0 3 1 31 927 0 3 1 29 2 Sides(opposing)-Y5 AC BD 1075 1 0 1 36 1085 1 0 1 36 1110 1 0 1 36 YD AC BD 426 0 3 1 14 460 0 3 1 15 456 0 3 1 14 DATE:LOCATION: TYPE:PROJECT: CATALOG #: House Side Street Side FIXTURE BACK SIDE Shield Side - C FIXTURE LEFT SIDEShield Side - BFIXTURE FRONT SIDEShield Side - A FIXTURE RIGHT SIDE Shield Side - D * - Values are representative of the Distribution + Shielding Ordering Code combination, IES file may need to be rotated to match an equivalent shielding configuration. KB6-LED BOLLARDS Page 4 of 6 Rev 04/18/24 aal_kb6_spec_R02 currentlighting.com/aal © 2022-2024 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. DIMENSIONS DATE:LOCATION: TYPE:PROJECT: CATALOG #: MODEL K41-…-SMK Overall Height 42” / 1067mm Overall Length 6” / 152mm Overall Width 6” / 152mm Window Height 19.9” / 51cm Window Width 4” / 10cm WEIGHT 30 lbs. / 13.6kg FRONT LEFT BACK RIGHT DISTRIBUTION OUTPUT* Street Side House SideSHIELDING SIDE A B C D * Housing and optical distribution are independently field rotatable in 90° increments . Default factory orientations shown above. KB6-LED BOLLARDS Page 5 of 6 Rev 04/18/24 aal_kb6_spec_R02 currentlighting.com/aal © 2022-2024 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. DATE:LOCATION: TYPE:PROJECT: CATALOG #: PHOTOMETRICS ISOLINE TEMPLATES 5' grid spacing. Equivalent (rotated) configurations are shown in italics. Asymmetric Distribution Symmetric Distribution Shielding Type II Type III Type IV Type V Diffused Lens Type V Diffused Lens 0.5 FC 1 FC 2 FC 3 FC 4 FC 5 FC 6 FC 7 FC 8 FC ARCHITECTURAL AREA LIGHTINGKB6-Y2-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. CLEAR LENS.LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 1323Mounting Height = 3.50 FtMaximum Calculated Value = 16.77 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 KB6-Y2-1050 KB6-Y3-1050 KB6-Y4-1050 KB6-Y5-1050 KB6-YD-1050 KB6-Y2-C-1050 KB6-Y3-C-1050 KB6-Y4-C-1050 KB6-Y5-C-1050 KB6-YD-C-1050 KB6-Y2-HSS-1050 KB6-Y3-HSS-1050 KB6-Y4-HSS-1050 KB6-Y5-CD-1050 KB6-YD-CD-1050 KB6-Y5-AB-1050 KB6-YD-AB-1050 KB6-Y5-BC-1050 KB6-YD-BC-1050 KB6-Y5-AD-1050 KB6-YD-AD-1050 KB6-Y5-AC-1050 KB6-YD-AC-1050 KB6-Y5-BD-1050 KB6-YD-BD-1050 KB6-Y5-BCD-1050 KB6-YD-BCD-1050 KB6-Y5-ABC-1050 KB6-YD-ABC-1050 KB6-Y5-ACD-1050 KB6-YD-ACD-1050 (none) 1 Side C or HSS 2 Sides adjacent CD, AB, BC or AD 2 Sides opposing AC or BD 3 Sides BCC, ABC, or ACD ARCHITECTURAL AREA LIGHTINGKB6-Y3-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. CLEAR LENS.LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 1231Mounting Height = 3.50 FtMaximum Calculated Value = 14.06 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-Y4-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. CLEAR LENS.LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 1223Mounting Height = 3.50 FtMaximum Calculated Value = 17.11 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-Y5-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. CLEAR LENS.12 LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 1179Mounting Height = 3.50 FtMaximum Calculated Value = 6.94 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-Y2-C-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. CLEAR LENS. "C" SHIELDING.12 LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 1226Mounting Height = 3.50 FtMaximum Calculated Value = 17.09 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-Y3-C-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. CLEAR LENS. "C" SHIELDING.12 LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 1128Mounting Height = 3.50 FtMaximum Calculated Value = 14.32 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-Y4-C-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. CLEAR LENS. "C" SHIELDING.12 LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 1141Mounting Height = 3.50 FtMaximum Calculated Value = 16.57 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-Y5-CD-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. CLEAR LENS. "cd" SHIELDING.12 LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 640Mounting Height = 3.50 FtMaximum Calculated Value = 7.26 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-YD-BC-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. DIFFUSED LENS. "BC" SHIELDING12 LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 251Mounting Height = 3.50 FtMaximum Calculated Value = 1.29 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-Y5-AC-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. CLEAR LENS. "AC" SHIELDING.12 LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 612Mounting Height = 3.50 FtMaximum Calculated Value = 7.00 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-YD-AC-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. DIFFUSED LENS. "AC" SHIELDING12 LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 248Mounting Height = 3.50 FtMaximum Calculated Value = 1.03 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-Y5-BCD-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. CLEAR LENS. "BCD" SHIELDING.12 LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 316Mounting Height = 3.50 FtMaximum Calculated Value = 7.13 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-YD-BCD-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. DIFFUSED LENS. "BCD" SHIELDING12 LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 61Mounting Height = 3.50 FtMaximum Calculated Value = 1.04 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2015 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-DS-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. DIFFUSED LENS. Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 509Mounting Height = 3.50 FtMaximum Calculated Value = 1.35 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-Y5-C-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. CLEAR LENS. "C" SHIELDING.12 LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 926Mounting Height = 3.50 FtMaximum Calculated Value = 7.13 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 ARCHITECTURAL AREA LIGHTINGKB6-DS-C-1050KICK BOLLARD. ALUMINUM HOUSING. LED ARRAY CONSIST OF HEATSINK, LEDSAND OPTICS. DIFFUSED LENS. "C" SHIELDING12 LED 5000K Horizontal FootcandlesScale: 1 Inch = 5 Ft.Light Loss Factor = 1.00Lumens Per Lamp = N.A. (absolute photometry)Luminaire Lumens = 373Mounting Height = 3.50 FtMaximum Calculated Value = 1.31 FcArrangement: Specify_Location(s) Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations.Results derived from content of manufacturers photometric ﬁle.Page 1 KB6-LED BOLLARDS Page 6 of 6 Rev 04/18/24 aal_kb6_spec_R02 currentlighting.com/aal © 2022-2024 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. ELECTRICAL CHARACTERISTICS DATE:LOCATION: TYPE:PROJECT: CATALOG #: TM-21 LIFETIME CALCULATION (500MA) Ambient Environment °C Projected Lumen Maintenance (Khrs)Reported L70255060 (TM-21)75 100 25 98%95%94%93%90%>60Khrs.40 98%95%94%93%90% Ordering Code LED Current (mA) System Wattage (W) Input Min. Power Factor Max THD (%) Dimming Range (V)Source/Sink Current (mA) Inrush Current Peak Amps AC Hz (A)T@50% (µs) 120 277 120 277120277347480 10XX 350 15 0.12 0.05 0.04 0.03 50/60 >0.9 20 0-10 1 15 N/A 20XX 700 30 0.25 0.11 0.09 0.06 21 49 160 TM-30 DATA COLOR VECTOR GRAPHIC TEST SOURCE Reference Illuminant Test Source SPECTRAL POWER DISTRIBUTION COMPARISON Reletive PowerWavelength (nm) Value Ordering Code XX30 XX40 XX50 Rf 69 69 71 Rg 99 99 98 CCT(K)3122 3852 5020 Duv 0.001 0.0004 0.0005 CIE Ra 74 73 74 100% 80% 60% 40% 20% 0% Wavelength (nm)Relative PowerXX30 XX40 XX50 380 430 480 530 580 630 680 730 780 100% 80% 60% 40% 20% 0% Wavelength (nm)Relative PowerXX30 XX40 XX50 380 430 480 530 580 630 680 730 780 NOR-3.5R NONI 3.5" ROUND RECESSED FAMILY currentlighting.com/kurtversen © 2023 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 1 of 5 Rev 06/26/23 KV_NOR-3.5R_spec_R03 DATE:LOCATION: TYPE:PROJECT: CATALOG #: FEATURES SPECIFICATIONS KEY DATA Wattages 25, 17, 10 Beam Spreads 25, 30, 35, 50, 75 SDCM 2 Rated Life L85 @ > 55,000 Hours • Downlight (two styles), Lensed Wall Wash (two styles), Adjustable Accent • 1/4" overlap microflange and flangeless trims featuring CorrectCut • Cast aluminum, magnetically-attached reflectors with applied finishes • Interchangeable primary optics for Downlight and Adjustable Accent • New Construction Non-IC, IC & Chicago Plenum applications • Up to 2000 delivered lumens @ 80 CRI 3000K • 90 CRI (27, 30, 35, 40K); 80 CRI (30, 35K) • Dynamic white options (18–30K Dim-to-Warm, 27–65K Tunable White) HOUSING CONSTRUCTION • Formed 22GA steel housing, finished matte black. New Construction (NHN) housing thermally protected. Insulation must be 3" away from housing. New Construction IC (NHI) inherently protected for direct contact with insulation installation • Removable cover plates on housing side and bottom for j-box inspection • Downlight (DL) & Shallow Lensed Wall Wash (LWS) feature ultra shallow 2" deep housing. Integral j-box has (4) ⅞" knock-outs • Adjustable Accent (AA) & Deep Lensed Wall Wash (LWD) utilize 3⅜" deep housing. Integral j-box has (6) ⅞" knock outs • Universal adjustable mounting brackets accept 0.5" EMT conduit or 1.5" or 0.75" lathing channel (by others) • Optional Residential Mounting Bars (RMB) extend from 16–24" • CorrectCut design is a rolled sheet metal edge which serves as a cutting guide for installers. Provides fixed cutout outer diameter which ensures reliable flange coverage and clean, finished appearance. KV-exclusive • LED protection plate pre-installed from factory • Control options require above ceiling access TRIM CONSTRUCTION • Reflector assembly includes reflector collar & reflector insert. Both cast aluminum, matte finish. Can be mixed/matched as desired. Insert attaches to collar via magnets. Gasket centers insert and prevents light leak ELECTRICAL • Integral LED module and driver are field serviceable from below through housing aperture • Chip-on-board LED. 2 SDCM CCT consistency for static white options. 3 SDCM consistency for Dynamic options • Static White and Dim to Warm LED rated life L85 @ 55,000 hours (TM-21). Tunable White LED rated life L70 @ 50,000 hours (TM-21) • Integral solid state constant current dimming driver. 1% and Dim-to-Dark options for 0–10V, ELV and TRIAC controls. NX or Lutron Vive control options available • Drivers are UL Class 2, inherent short circuit and overload protection. RoHS compliant CERTIFICATIONS • cULus certified to UL 1598 • Suitable for wet locations • Hexcel Louver (HEX) and No Lens (NON) suitable for damp locations. • City of Chicago Environmental Air (CCEA / CP) • Install in environments where ambient temperature does not exceed 25°C WARRANTY• 5 year warranty TRIM CONSTRUCTION (CONTINUED) • ¼" overlap flange. Thickness measures .047" • Ceiling thickness range ⅝"- 1¼". Two Downlight trim ceiling thickness options available: Shallow (DS) optimized for ⅝" ceiling (compatible up to & including 1⅛"). Deep (DD) optimized for 1¼" ceiling (compatible with 1¼" only) • Flangeless (FT) mud-in ring is low profile, die-cast featuring an edge to plaster up to. Ring attaches to ceiling and comes with removable protective plug installed at factory OPTICS • Static white fixtures feature low profile, high efficiency polycarbonate TIR primary optics for (DL) and (AA) functions • All dynamic white fixtures feature optical grade silicone lens • Optics installed and serviceable from below through housing aperture • Media holder included standard. Accepts 1 reflector accessory. Matte black finish, reduces visual brightness at top of trim • Adjustable Accent (AA) lockable hot-aim 0°– 40° vertical tilt, 362° horizontal rotation. Features translating center beam at finished ceiling plane (⅝") • Two wall wash options, both optimized for 18" spacing off-wall with 2:1 spacing. LWD optic provides industry-leading horizontal uniformity near top-of-wall. LWS optic provides excellent vertical uniformity in ultra shallow housing CONTROLS Color Tuning Technology UL1598 NOR-3.5R NONI 3.5" ROUND RECESSED FAMILY currentlighting.com/kurtversen © 2023 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 2 of 5 Rev 06/26/23 KV_NOR-3.5R_spec_R03 DATE:LOCATION: TYPE:PROJECT: CATALOG #: Examples: NOR-3.5RDL-NHN17-930K-MD-DM1NU / NOR-3.5RDS-TRM-FWHS-RBL-SOL ORDERING GUIDE CATALOG # HOUSING NOR-3.5R –––– Series Function Housing Output CRI/CCT Beam Spread 5 NOR-3.5R Noni Recessed 3.5" Round Shallow Housing (2" Depth) DL Downlight LWS Lensed Wall Wash, Shallow Deep Housing (3" Depth) LWD Lensed Wall Wash, Deep AA Adjustable Accent NHN New Construction, Non-IC NHI New Construction, IC 1 CP Chicago Plenum 1 10 10 Watt 17 17 Watt 25 25 Watt Static 927K 90 CRI, 2700K 930K 90 CRI, 3000K 935K 90 CRI, 3500K 940K 90 CRI, 4000K 830K 80 CRI, 3000K 835K 80 CRI, 3500K Dynamic 1830DT 90 CRI, 1800K–3000K Dim-to-Warm 1, 2, 3 2765T 90 CRI, 2700K–6500K SpectraSync™ Tunable White 1, 2, 3, 4 VN Very Narrow (.42 SC / 25°) NR Narrow (.50 SC / 30°) MD Medium (.58 SC / 35°) WD Wide (.80 SC / 50°) XW Extra Wide (1.06 SC / 75°) 6 LW Lensed Wall Wash 7 NOR-3.5R –TRM –– Series Function Trim Reflector Flange Color Reflector Insert Color Lens NOR-3.5R Noni Recessed 3.5" Round Shallow Housing Compatible DS Downlight, Shallow (5/8"–1 1/8" ceiling) DD Downlight, Deep (1 1/4" ceiling only) LWS Lensed Wall Wash, Shallow Deep Housing Compatible LWD Lensed Wall Wash, Deep AA Adjustable Accent TRM Trim Flanged FWHS White FGYS Gray FBLS Black FCOS Copper FAMW Anti-Microbial White FX Custom Finish Flangeless FT Flangeless Texture RWH White RGY Gray RBL Black RGT Graphite RPP Pink Panache RGH Grasshopper Smooth RWHS White RGYS Gray RBLS Black RCOS Copper RAMW Anti-Microbial White Other RX Custom Finish SOL Solite 9 CLR Clear 9 FRS Frosted 10 LIN Linear Spread (10 x 40°) 9, 11 HEX Hexcel Louver 9, 12 NON No Lens 9, 11 U – Dimming Controls 13 Voltage Accessories DM1 0–10V 1% 8, 14, 15 PDM ELV, TRIAC 1% 8, 14 ERP 0–10V, ELV, TRIAC Dim-to-Dark 8, 15 PEQ0E Lutron Hi-Lume Premier 0.1% SpectraSync DMT 0–10V 5% 4 N None LV Lutron Vive 0–10V (120–277V) LVE Lutron Vive EcoSystem (120V Only) NXE NX Dual RJ45 SmartPORTS, without Sensor 15 NXW NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor 15 U Universal Voltage (120–277V)RMB Residential Mounting Bars TRIM Notes: 1 Available in 10 or 17 watt outputs 2 NHN housing only 3 Available with NR or LW optic only 4 DMT driver must be selected for use with 2765T 5 DL and AA performance based on SOL lens with RWHS insert finish 6 Available only with FRS lens 7 Available only when LW functions selected 8 Not available with LVE control 9 Not available with LW function 10 Available with all functions. Must be selected with LW 11 Available with DS only 12 Wet location not suitable for HEX or NON 13 Above ceiling access required 14 Only available in 17 or 25 watt outputs 15 DM1 or ERP required with NX options NOR-3.5R NONI 3.5" ROUND RECESSED FAMILY currentlighting.com/kurtversen © 2023 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 3 of 5 Rev 06/26/23 KV_NOR-3.5R_spec_R03 DATE:LOCATION: TYPE:PROJECT: CATALOG #: PERFORMANCE DATAPERFORMANCE DATA Output Beam Spread Beam Delivered Lumens Efficacy Spacing Criterion Candela @ 0° 25 Watt Very Narrow (VN)25 2033 80 0.42 8414 Narrow (NR)30 1964 78 0.50 6056 Medium (MD)35 1846 73 0.58 4200 Wide (WD)50 2021 80 0.80 2711 Extra Wide (XW)75 1598 63 1.06 1133 17 Watt Very Narrow (VN)25 1535 89 0.42 6311 Narrow (NR)30 1483 86 0.50 4542 Medium (MD)35 1394 81 0.58 3150 Wide (WD)50 1526 88 0.80 2033 Extra Wide (XW)75 1206 70 1.06 850 10 Watt Very Narrow (VN)25 953 93 0.42 3929 Narrow (NR)30 921 90 0.50 2828 Medium (MD)35 866 85 0.58 1961 Wide (WD)50 948 93 0.80 1266 Extra Wide (XW)75 749 73 1.06 529 Performance data provided below based on 80 CRI, 3000K with White reflector and Solite lens. Extra Wide (XW) and Lensed Wall Wash (LWS, LWD) performance includes White reflector and Frosted lens. Output Delivered Lumens Efficacy Max Candela 25 Watt Wall Wash, Shallow (LWS)1280 51 773 Wall Wash, Deep (LWD)1306 52 1223 17 Watt Wall Wash, Shallow (LWS)967 56 587 Wall Wash, Deep (LWD)986 57 929 10 Watt Wall Wash, Shallow (LWS)600 59 364 Wall Wash, Deep (LWD)612 60 576 NOR-3.5R NONI 3.5" ROUND RECESSED FAMILY currentlighting.com/kurtversen © 2023 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 4 of 5 Rev 06/26/23 KV_NOR-3.5R_spec_R03 DATE:LOCATION: TYPE:PROJECT: CATALOG #: ELECTRICAL DATA MULTIPLIER TABLE DM1 PDM ERP PEQ0E DMT Dimming Protocols Supported 0–10V ELV, TRIAC 0–10V, ELV, TRIAC Lutron Hi-Lume Premier 0.1%0–10V Input Voltage 120–277V 120–277V 120–277V 120–277V 120–277V Input Frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz Dim Level 20W <1% 17W <5%1%1% Dim-to-Dark 0.1% Dim-to-Dark 17W <5% Power Factor (PF)≥0.90 ≥0.90 ≥0.90 0.95 Typical ≥0.90 Total Harmonic Distortion (THD)<20%<20%<20%15% Typical <20% Inrush Current NEMA 410 Limit NEMA 410 Limit NEMA 410 Limit NEMA 410 Limit NEMA 410 Limit Electromagnetic Interference (EMI) Filtering FCC CFR Title 47 Part 15 Class B FCC CFR Title 47 Part 15 Class B FCC CFR Title 47 Part 15 Class B at 120Vac, Class A at 277Vac Contact Lutron FCC CFR Title 47 Part 15 Class B Transient Surge Protection IEEE C62.41.1-2002 & C62.41.2-2002 Category A IEEE C62.41.1-2002 & C62.41.2-2002 Category A IEEE C62.41.1-2002 & C62.41.2-2002 Category A Contact Lutron IEEE C62.41.1-2002 & C62.41.2-2002 Category A CRI, CCT 927 930 935 940 830 835 1830TD 2765T 0.83 0.86 0.87 0.87 1.0 1.02 0.46 0.55* Media SOL CLR LIN HEX FRS NON *Multiplier value based on 4600K. 1.0 1.02 0.95 0.76 0.78 1.12 Output 10 Watt 17 Watt 25 Watt 0.47 0.76 1.0 Finishes RWH RGY RBL RGT RPP RGH RWHS RGYS RGBLS RCOS RAMW 1.0 0.9 0.85 0.85 0.8 0.8 1.02 0.95 0.9 0.8 1.05 NOR-3.5R NONI 3.5" ROUND RECESSED FAMILY currentlighting.com/kurtversen © 2023 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 5 of 5 Rev 06/26/23 KV_NOR-3.5R_spec_R03 DATE:LOCATION: TYPE:PROJECT: CATALOG #: 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash, Shallow (LWS) Downlight, Shallow (DS) Downlight, Deep (DD) Lensed Wall Wash, Deep (LWD) Adjustab (AA) Shallow Housing (DL, LWS) 2.5 Round Recessed Ceiling Cutout: 3.875 Flangeless (FT) w Downlight, Shallo 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash,Shallow (LWS)Downlight,Shallow (DS)Downlight,Deep (DD)Lensed Wall Wash,Deep (LWD)Adjustab (AA) Shallow Housing (DL, LWS) 2.5 Round Recessed Ceiling Cutout: 3.875 Flangeless (FT) w Downlight, Shallo 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert H R R Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash, Shallow (LWS) Downlight, Shallow (DS) Downlight, Deep (DD) Lensed Wall Wash, Deep (LWD) Adjustable (AA) Shallow Housing (DL, LWS) 3. 2.5 Round Recessed 2. Ceiling Cutout: 3.875 Flangeless (FT) with Downlight, Shallow (DS) Reflector Collar Housing 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash,Shallow (LWS)Downlight,Shallow (DS)Downlight,Deep (DD)Lensed Wall Wash,Deep (LWD)Adjustable(AA) Shallow Housing (DL, LWS) 2.5 Round Recessed Ceiling Cutout: 3.875 Flangeless (FT) withDownlight, Shallow (DS) Flangeless (FT) with Downlight, Shallow (DS) Flangeless (FT) Shallow Housing (DL, LWS) Deep Housing (LWD, AA) 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash,Shallow (LWS)Downlight,Shallow (DS)Downlight,Deep (DD) Lensed Wall Wash, Deep (LWD)Adjustable(AA) Shallow Housing (DL, LWS) 2.5 Round Recessed Ceiling Cutout: 3.875 Flangeless (FT) with Downlight, Shallow (DS) 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash, Shallow (LWS) Downlight, Shallow (DS) Downlight, Deep (DD) Lensed Wall Wash, Deep (LWD) Adjustable (AA) Shallow Housing (DL, LWS) 2.5 Round Recessed Ceiling Cutout: 3.875 Flangeless (FT) with Downlight, Shallow (DS)Downlight (DS) 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash, Shallow (LWS) Downlight, Shallow (DS) Downlight, Deep (DD) Lensed Wall Wash, Deep (LWD) Adjustable (AA) Shallow Housing (DL, LWS) 2.5 Round Recessed Ceiling Cutout: 3.875 Flangeless (FT) with Downlight, Shallow (DS) 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash,Shallow (LWS)Downlight,Shallow (DS)Downlight,Deep (DD)Lensed Wall Wash,Deep (LWD)Adjustable(AA) Shallow Housing (DL, LWS) 2.5 Round Recessed Ceiling Cutout: 3.875 Flangeless (FT) withDownlight, Shallow (DS)Lensed Wall Wash Shallow (LWS) 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash, Shallow (LWS) Downlight, Shallow (DS) Downlight, Deep (DD) Lensed Wall Wash, Deep (LWD) Adjustable (AA) Shallow Housing (DL, LWS) 2.5 Round Recessed Ceiling Cutout: 3.875 Flangeless (FT) with Downlight, Shallow (DS) 37514.78 3.5 Round Recessed Housing DownLight, Deep (DD) 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash, Shallow (LWS) Downlight, Shallow (DS) Downlight, Deep (DD) Lensed Wall Wash, Deep (LWD) Adjustable (AA) Shallow Housing (DL, LWS) 2.5 Round Recessed Ceiling Cutout: 3.875 Flangeless (FT) with Downlight, Shallow (DS) 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash, Shallow (LWS) Downlight, Shallow (DS) Downlight, Deep (DD) Lensed Wall Wash, Deep (LWD) Adjustable (AA) Shallow Housing (DL, LWS) 2.5 Round Recessed Ceiling Cutout: 3.875 Flangeless (FT) with Downlight, Shallow (DS)Lensed Wall Wash Deep (LWD) Flange Reflector Insert 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash, Shallow (LWS) Downlight, Shallow (DS) Downlight, Deep (DD) Lensed Wall Wash, Deep (LWD) Adjustable (AA) Shallow Housing (DL, LWS) 3 2.5 Round Recessed 2 Ceiling Cutout: 3.875 Flangeless (FT) with Downlight, Shallow (DS) 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash, Shallow (LWS) Downlight, Shallow (DS) Downlight, Deep (DD) Lensed Wall Wash, Deep (LWD) Adjustable (AA) Shallow Housing (DL, LWS) 2.5 Round Recessed Ceiling Cutout: 3.875 Flangeless (FT) with Downlight, Shallow (DS) 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash,Shallow (LWS)Downlight,Shallow (DS)Downlight,Deep (DD)Lensed Wall Wash,Deep (LWD)Adjustable(AA) Shallow Housing (DL, LWS) Ceiling Cutout: 3.875 Flangeless (FT) withDownlight, Shallow (DS)Adjustable (AA) 37514.78 542.11 130° 1586.20 2278.95 33913.33 37514.78 903.53 .26 7.78 1.38 1.10 1.93 1.10 3.53 1.681.05 .05 .16 3.5 Round Recessed Housing Reﬂector Collar Reﬂector Insert Deep Housing (LWD, AA) Flangeless (FT) Flange Lensed Wall Wash, Shallow (LWS) Downlight, Shallow (DS) Downlight, Deep (DD) Lensed Wall Wash, Deep (LWD) Adjustable (AA) Shallow Housing (DL, LWS) 3 2.5 Round Recessed 2 Ceiling Cutout: 3.875 Flangeless (FT) with Downlight, Shallow (DS) DIMENSIONS SRT1 EDGE-LIT CEILING/SURFACE/GARAGE currentlighting.com/beacon © 2023 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 1 of 6 Rev 10/11/23 BEA_SRT1_Edgelit_R04 FEATURES • For ceiling mount and parking garage applications from an 8–15 foot mounting height • Edge-lit flat lens for optimal visual comfort and uniformity across the lens • Two optical distributions specifically design for parking garage and canopy applications are available making the Beacon Edge-Lit luminaire both versatile and functional • UL/cUL listed for wet locations, IP65 and 3G vibration rated • Occupancy sensor available for complete on/off and dimming operation DATE:LOCATION: TYPE:PROJECT: HOUSING • Die-cast aluminum housing ensures long electrical component life and luminaire performance • Corrosion resistant powder coat finish both protects and provides architectural appearance • One piece molded silicone gasket ensures weather proof seal • Thermally isolated driver mounted to dedicated bracket reduces operating temperatures and increases driver life and reliability • Torx head screws standard for tamper resistant housing OPTICS • Edge-lit acrylic light guide provides blended non-pixelated light for unprecedented visual comfort • Choice of multiple light outputs with lumen range of 2000–6000 • Two distribution types: Type 5 Square Wide, Type 5 Concentrated • Wide variety of CCT’s and CRI’s offered: 3000K (70CRI), 3000K (80CRI), 3500K (80CRI), 4000K (70CRI), 4000K (80CRI) or 5000K (70 CRI) CCT CERTIFICATIONS • Listed to UL1598 for use in wet location, listed for -40oC to 40oC applications • IDA approved with zero uplight for 3000K and warmer CCTs • DLC® (DesignLights Consortium) Qualified. Please refer to the DLC website for specific product qualifications at www.designlights.org • IP65 WARRANTY • 5 year warranty SPECIFICATIONS ELECTRICAL • 120V–277V 50/60Hz available • 0–10V dimming drivers are RoHS compliant • Dimming Drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than the 24” standard INSTALLATION • Standard quick mount plate over standard 4" junction box or octagonal junction box and allows for simplified fixture installation • Standard luminaire accepts a rigid or 3/4" NPT stem for pendant mounting via wet location j-box (by others) • Optional bird deterrent shroud available for field installation OPTIONS/CONTROLS • Standalone occupancy sensor available for on/off or dimming operation • Uplight option provides approximately 800 lumens and consumes only 8 additional watts • Vandal resistant wire guard available as an option for factory installation or as an accessory for field installation • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application CATALOG #: IP65 Weight SRT1 8 lbs / 3.6 kg 12.02 3.153.1" 12.02 3.15 12" CONTROL TECHNOLOGY SRT1 EDGE-LIT CEILING/SURFACE/GARAGE currentlighting.com/beacon © 2023 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 2 of 6 Rev 10/11/23 BEA_SRT1_Edgelit_R04 ORDERING GUIDE DATE:LOCATION: TYPE:PROJECT: CATALOG #: Example: SRT1-35-3K7-5QW-UNV-BLT-WG CATALOG # ––––––– Series Engine CCT Distribution Voltage Color/Finish Options SRT1 Edge-Lit Parking Garage Size 1 15 15W Nominal 2000 lm 20 20W Nominal 2500 lm 35 35W Nominal 4500 lm 55 55W Nominal6500 lm 3K7 3000K, 70 CRI 3K8 3000K, 80 CRI 35K8 3500K, 80 CRI 4K7 4000K, 70 CRI 4K8 4000K, 80 CRI 5K7 5000K, 70 CRI 5QW Type 5 Square Wide 5C Type 5 Concentrated UNV 120V- 277V 120 120V 208 208V 240 240V 277 277V BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Colors WG Wire Guard UD Uplight Module3 F Single Fuse (120, 277)1 LD3 36" Lead Length2 LD6 72" Lead Length2 LD9 108" Lead Length2 SP10K 10kA Surge Protection3 LMB Less Mounting Bracket Notes: 1 Must specify voltage 2 Standard wire lead length 24" 3 SP10K, NX and SCP not available with uplight 4 120V or 277V only Control Options NX Standalone3 NXWS-12F NX hubbNET Wireless Enabled Integral NXSMP2-OMNI PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming Sensor Controls3 SCP-8F Remote control programmable line voltage sensor (8-12' recommended mounting height)4 SCP-20F Remote control programmable line voltage sensor (12-20' recommended mounting height) 4 Accessories (Order Separately) SRT1-WG Wire Guard SRT-MB Mounting bracket for pre-installation SRT1-BS-XXX Bird deterrent shroud for SRT1 version, not available with uplight SCP- REMOTE Remote control for SCP option; order at least on per project to program and control CLEDSJK Whiteway stem and junction box Nominal Watts Nominal Lumens Distribution 5K (5000K NOMINAL 70 CRI)4K (4000K NOMINAL 70 CRI)3K (3000K NOMINAL 70 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G 15 2500 5C 2470 146.61 1 0 1 2459 145.91 1 0 1 2364 140.30 1 0 1 5QW 2378 141.15 1 0 1 2367 140.48 1 0 1 2276 135.07 1 0 1 20 3000 5C 3093 136.86 1 0 1 3078 136.21 1 0 1 2960 130.97 1 0 1 5QW 2974 131.60 1 0 1 2960 130.97 1 0 1 2846 125.93 1 0 1 35 4500 5C 4757 131.05 2 0 1 4734 130.42 2 0 1 4552 125.41 2 0 1 5QW 4574 126.01 2 0 1 4552 125.41 2 0 1 4377 120.58 2 0 1 55 6500 5C 6814 127.13 2 0 1 6782 126.52 2 0 1 6521 121.66 2 0 1 5QW 6552 122.24 3 0 1 6521 121.66 3 0 1 6270 116.98 3 0 1 PERFORMANCE DATA SRT1 EDGE-LIT CEILING/SURFACE/GARAGE currentlighting.com/beacon © 2023 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 3 of 6 Rev 10/11/23 BEA_SRT1_Edgelit_R04 OUTDOOR LIGHTING CONTROLS OPTIONS CONTROLS FUNTIONALITY Control Option Ordering Logic & Description Control Option Functionality Control Option ComponentsNetworkableGroupingSchedulingOccupancy/ Motion Daylight Harvesting 0-10V Dimming On/Off Control Bluetooth App Programming Sensor Height NX WirelessNXWS12F NX Networked Wireless Enabled Integral NXSMP2-OMNI-O PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming ✓✓✓✓✓✓✓✓12ft NXSMP2-OMNI-O CONTROLS TECH SUPPORT 800-888-8006 (7:00 AM - 7:00 PM)NX LIGHTING CONTROLS FREE APP The NX Lighting Controls App is free to use mobile application for programming both NX Lighting Controls System or Standalone Bluetooth Sensors. The mobile app allows you to configure devices, discover and setup wireless enable luminiares and program NX system settings. Apple App: https://apps.apple.com/us/app/nx-lighting-controls/id962112904 Google Play: https://play.google.com/store/apps/details?id=io.cordova.NXBTR&hl=en_US&gl=US Apple App Google Play Occupancy Sensor Enabled Occupancy Sensor Sensitivity 7 Occupancy Sensor Timeout 15 Minutes Occupied Dim Level 100% Unoccupied Dim Level 0% Daylight Sensor Disabled Bluetooth Enabled 2.4GHz Wireless Mesh On "Passcode Factory Passcode: HubbN3T!"Enabled Occupancy Sensor Enabled Occupancy Sensor Sensitivity 7 Occupancy Sensor Timeout 8 Minutes Occupied Dim Level 100% Unoccupied Dim Level 50% Daylight Sensor Disabled DEFAULT SETTINGS NX WirelessStand AloneMinor Motion Major Motion NXSMP2-OMNI 12' (3.7m) 22' (6.7m) Minor Motion Major Motion NXSMP2-OMNI 12' (3.7m) 22' (6.7m) NX WIRELESS COVERAGE PATTERNS Control Option Ordering Logic & Description Control Option Functionality Control Option ComponentsNetworkableGroupingSchedulingOccupancy/Motion Daylight Harvesting 0-10V Dimming On/Off Control Bluetooth App Programming Sensor Height IndependentSCP_F Sensor Control Programmable, sensor range, reference product specification for height selections ---✓✓✓✓-8ft or 20ft SCP_F CONTROLS FUNCTIONALITY Wattstopper ® FSP-Lx Lens Modules for FSP-2xx Series PIR Occupancy Sensors Lens Coverage GuideNo: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China SPECIFICATIONS Operating Temperature- ....................40° to 167°F (-40° to 75°C IP Rating when mounted to outdoor rated fixture ................IP-66 DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm 10' 0 Ceiling 5' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View Wattstopper ® FSP-Lx Lens Modules for FSP-2xx Series PIR Occupancy Sensors Lens Coverage GuideNo: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China SPECIFICATIONS Operating Temperature- ....................40° to 167°F (-40° to 75°C IP Rating when mounted to outdoor rated fixture ................IP-66 DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View Wa FSP-Lx Lens Co No: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China DESCRIPTION AND OP The FSP-2xx occupancy sensor is modular, consisting of two parts, a Senso according to the type of power available in the installation, and the desired o coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mou Sensors must directly “see” motion of an occupant to detect them, so carefu placing the sensor where shelving or other obstructions may block the senso The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses w patterns available with each lens. Coverages shown in the diagrams are ma for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect senso covered area (above 89-92°F) reduce the detection zone of the sensor. Con are expected to be high. Additionally, high floor level temperature may requir mounted above 40’ may only detect large heat signatures such as forklift tru See the Sensor Module Installation Instructions for a complete descrip safety information. FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L The FS area a 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft. Coverage Side View COVERAGE PATTERNS FOR SCP_F DATE:LOCATION: TYPE:PROJECT: CATALOG #: SRT1 EDGE-LIT CEILING/SURFACE/GARAGE currentlighting.com/beacon © 2023 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 4 of 6 Rev 10/11/23 BEA_SRT1_Edgelit_R04 PROJECTED LUMEN MAINTENANCE Ambient Temp.0 25,000 *TM-21-1136,000 50,000 100,000 Calculated L70 (Hours) 25°C / 77°F 1.00 0.98 0.96 0.95 0.89 278,000 40°C / 104°F 0.99 0.98 0.96 0.94 0.88 264,000 LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF)SRT LUMEN MULTIPLIER CHART DIMENSIONS A B Weight 12"(304mm)3.1" (78mm)8lbs(3.6kg) 12.02 3.15 A 12.02 3.15B DATE:LOCATION: TYPE:PROJECT: CATALOG #: Ambient Temperature Lumen Multiplier 0˚C 32˚F 1.03 10˚C 50˚F 1.01 20˚C 68˚F 1.00 25˚C 77˚F 1.00 30˚C 86˚F 0.99 40˚C 104˚F 0.98 SRT Lumen Multiplier CCT 70 CRI 80 CRI 3000K 0.957 0.85 3500K X 0.91 4000K 0.995 0.95 5000K 1 0.95 ADDITIONAL INFORMATION FINISH OPTIONS DBT Dark Bronze Textured BLT Black Textured PSS Platinum Silver Smooth GTT Graphite TexturedGYSGray Smooth WHT White Textured ELECTRICAL DATA Nominal Watts System Watts Line Voltage AMPS AC Dimming Range Absolute Voltage Range on 0-10V (+) VAC HZ 120 208 240 277 VAC HZ 15 16.9 120-277 50/60 0.14 0.08 0.07 0.06 10% to 100%0V 10V 20 21.6 120-277 50/60 0.18 0.10 0.09 0.08 10% to 100%0V 10V 35 34.6 120-277 50/61 0.29 0.17 0.14 0.12 10% to 100%0V 10V 55 54.9 120-277 50/62 0.46 0.26 0.23 0.20 10% to 100%0V 10V SRT1 EDGE-LIT CEILING/SURFACE/GARAGE currentlighting.com/beacon © 2023 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 5 of 6 Rev 10/11/23 BEA_SRT1_Edgelit_R04 DATE:LOCATION: TYPE:PROJECT: CATALOG #: CONTROLS Optional uplight module provides 800 lumens of indirect illumination for improved visual quality while eliminating cave effect. Standalone Controls Uplight Optional passive infrared sensors are available for basic occupancy and daylight sensing. Programmable via remote or Bluetooth® phone app. MOUNTING ADDITIONAL INFORMATION (CONT'D) Bird Deterrent An optional bird shroud deterrent can be specified at the factory or as an accessory for field installation. Wire Guard An optional wire guard can be specified at the factory or as an accessory for field installation. Surface Mount Pendant Mount CLEDSJK Standard 3/4" threaded entry for pendant applications. Pendant available as accessory Whiteway 6 inch stem and junction box Mounting plate with “quick mount” hanger for one person simple installation. ACCESSORIES SRT1 EDGE-LIT CEILING/SURFACE/GARAGE currentlighting.com/beacon © 2023 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 6 of 6 Rev 10/11/23 BEA_SRT1_Edgelit_R04 DATE:LOCATION: TYPE:PROJECT: CATALOG #: NXOS12F 1.8” 1.2” 1.4” 2.6” NXSMP-OMNI Range 12' (3.7m) 22' (6.7m) Minor Motion Major Motion ADDITIONAL INFORMATION (CONT'D) CONTROLS (CONT'D) SCP-20F '3'0'3'6'9'21'9'6 12' 10' 20' 0' 15' Ceiling 5' '02'81'511 5'18'20' 1.8" 1.4" 2.6" 20' 15' 10' 5' 0' Ceiling 20'1 0'0'10'20' 0' 20' 10' 10' 20' 40 ft40 ft 0' 0' 10' 10' 20' 20' 10'10'20'20'20' 18' 15' 12' 9' 6' 3' 0' 3' 6' 9' 12' 15' 18' 20' 0.6"0.6" 22' 12' A B 2.3"(59mm) .8" (20mm) 0.78”19.7mm 2.33”59.2mmA B 0.78"m 0' 8' '7'3'3'07'11'11'24'24' SCP-8F A B 2.3"(59mm) .8" (20mm) 30' 20' 10' 10' 20' 0' 10'0 '1 0'20'20' 60 ft 30'30'30' 60 ft 0' 0' 10' 10' 20' 20' 30' 30'10'10'20'30'20'30' 24' 11' 7' 3' 0' 3' 7' 11' 24' 0' 8' 2.33"59.2mm 19.7m A B DATE:LOCATION: • Low profile LED wall luminaire with a variety of IES distributions for lighting applications such as retail, commercial and industrial building mount • Featuring Strike and Micro Strike Optics which maximizes target zone illumination with minimal losses at the house-side, reducing light trespass issues • Visual comfort standard • Control options including photo control, occupancy sensing, NX Distributed Intelligence™, LightGRID+ and 7-Pin with networked controls • Battery Backup options available for emergency code compliance • Quick-mount adapter allows easy installation/maintenance • 347V and 480V versions for industrial applications and Canada DATE:LOCATION: TYPE:PROJECT: CONSTRUCTION • Die-cast housing with hidden vertical heat fins that are optimal for heat dissipation while keeping a clean smooth outer surface • Corrosion resistant, die-cast aluminum housing with powder coat paint finish • Powder paint finish provides durability in outdoor environments. Tested to meet 1000 hour salt spray rating OPTICS• Entire optical aperture illuminates to create a larger luminous surface area resulting in a low glare appearance without sacrificing optical performance • 48 or 160 midpower LEDs • 3000K, 4000K or 5000K (70 CRI/80 CRI) CCT • Zero uplight distributions • LED optics provide IES type II, III and IV distributions. Type II only available in RWL2 configurations INSTALLATION• Quick-mount adapter provides easy installation to wall or to recessed junction boxes (4" square junction box) • Designed for direct j-box mount. • Integral back box contains 1/2” conduit hubs • Integral backbox provided as standard with selection of some options ELECTRICAL• 120V-277V universal voltage 50/60Hz 0-10V dimming drivers • 347V and 480V dimmable driver option for all wattages above 35W • Ambient operating temperature -40˚C to 40˚C • Driver RoHS and IP66 CONTROLS (CONTINUED)• Dual Driver and Dual Power Feed options creates product configuration with 2 internal drivers for code compliance • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application. • LightGRID+ available with in fixture wireless control module, features dimming and occupancy sensor. Also available in 7-pin configuration CERTIFICATIONS • Certified to UL 1598 and CSA 22.2#250.0-24 for wet locations • IP65 rated housing • DLC® (DesignLights Consortium Qualified), with some Premium Qualified configurations. Not all product variations listed in this document are DLC® qualified. Refer to http://www.designlights.org for the most up-to-date list. • Emergency battery backup options are California Energy Commission (CEC) Title 20 Compliant • Meets IDA requirements using 3K CCT configuration at 0 degrees or tilt WARRANTY • 5 year limited warranty ELECTRICAL (CONTINUED) • 10kV Surge Protector optional • Drivers have greater than .90 power factor and less than 20% Total Harmonic Distortion • Dual Driver option provides 2 drivers within luminaire but only one set of leads exiting the luminaire, where Dual Power Feed provides two drivers which can be wired independently as two sets of leads are extended from the luminaire. Both options can not be included in one same fixture. • Dimming drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than 6” standard. CONTROLS• Photo control, occupancy sensor and wireless available for complete on/off and dimming control • Button photocontrol is suitable for 120-277V operation • 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately) • NX Distributed Intelligence™ available with in fixture wireless control module, features dimming and occupancy sensor LightGRID+ available with in fixture wireless control module, features dimming and occupancy sensor • Integral Battery Backup provides emergency lighting for the required 90 minute path of egress • Battery Backup suitable for operating temperatures -25˚C to 40˚C. RWL1 battery is 12.5W RWL2 battery is 18W CATALOG #: SERVICE PROGRAM 7 11 54 9.73 5.85 10.37 8.73 RWL1 15.37 16 5.54 15 3.88 12 5 RWL2 Weight RWL1 6.5 lbs / 2.95 kg RWL2 16.5 lbs / 7.48 kg 8.7" 9.7" 7.0" 3.9"5.0" 14.0" 15.0" 3.9" 12.0" 5.0" FEATURES SPECIFICATIONS CONTROL TECHNOLOGY currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 1 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK – Control Options Network Distribution NXW NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor 2, 7, 12 NXWS16F NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming 2, 7, 12 NXWS40F NX Networked Wireless Enabled Integral NXSMP2-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming 2, 7, 12 WIR LightGRID+ In-Fixture Module 2, 9 Stand Alone Sensors SCP-8F Remote control programmable line voltage sensor 4, 5, 6, 8 SCP-20F Remote control programmable line voltage sensor 4, 5, 6, 8 BTS-14F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 1, 2, 5, 7, 8 BTS-40F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 1, 2, 5, 7, 8 BTSO-12F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor, up to 12' mounting height 1, 2, 5, 7, 8 Control Options 7PR_7-Pin Receptacle 8, 9 F Fusing 4 E Emergency Battery Backup 3, 8, 9 EH Emergency Battery w/ Heater Option 3, 8, 9 2DR Dual Driver 3, 9, 10 2PF Dual Power Feed 3, 9, 10 PC Button Photocontrol 5, 6, 11 SP 10kA Surge Protector 11 DATE:LOCATION: TYPE:PROJECT: CATALOG #: Example: RWL1–48L-10–3K7–2–UNV–BLS–E CATALOG # Control Options Standalone SCPREMOTE Order at least one per project location to program and control Notes: 1 replace "xxx" with color option Catalog Number Description WP-BB-XXX Accessory for conduit entry 1 –––––– Series # LEDs - Wattage CCT/CRI Distribution Voltage Color RWL1 Micro Strike Optics RWL2 Micro Strike Optics RWL2 Strike Optics 48L-10 1,000 Lumens 48L-15 2,000 Lumens 48L-20 2,500 Lumens 5, 6 48L-25 3,500 Lumens 48L-35 4,500 Lumens 48L-45 5,500 Lumens 5, 6 160L-45 6,500 Lumens 160L-50 7,500 Lumens 160L-65 9,500 Lumens 160L-80 11,000 Lumens 160L-95 13,000 Lumens 160L-115 15,000 Lumens 160L-135 17,500 Lumens 160L-155 19,500 Lumens 36L-39 5,500 Lumens, Strike 36L-55 7,500 Lumens, Strike 36L-85 10,000 Lumens, Strike 36L-105 12,500 Lumens, Strike 36L-120 14,000 Lumens, Strike 3K7 3000K, 70 CRI 4K7 4000K, 70 CRI 5K7 5000K, 70 CRI 3K8 3000K, 80 CRI 4K8 4000K, 80 CRI 5K8 5000K, 80 CRI 2 IES TYPE II 3 IES TYPE III 4F IES TYPE IV Forward 4W IES TYPE IV Wide UNV 120-277V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Matte Textured PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color Notes: 1 Not available in RWL1 2 Cannot be combined with E, EH, 2DR, 2PF due to space constraints 3 Cannot be combined with Controls due to space constraints 4 Must specify voltage 5 Not available in 347V 6 Not available in 480V 7 Available in 480V in 95W, 115W, 155W only 8 Cannot be combined with 2DR or 2PF 9 Located in integral backbox which will be automatically added to the fixture if selected 10 Not available in RWL1-48L in 10W, 15W, or 20W 11 SP and PC cannot be combined due to space constraints 12 SP and PC cannot be combined due to space constraints *Based on space limitations, some options may not be combined. Consult Factory. = Service ProgramLimit of 15 luminairesGray Shading ORDERING GUIDE CONTROLS ACCESSORIES AND REPLACEMENT PARTS - MADE TO ORDER currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 2 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: OUTDOOR LIGHTING CONTROLS OPTIONS Control Option Ordering Logic & Description Control Option Functionality Control Option ComponentsNetworkableGroupingSchedulingOccupancy/ Motion Daylight Harvesting 0-10V Dimming On/Off Control Bluetooth App Programming Sensor Height NX WirelessLightGRID+IndependentCONTROLS FUNCTIONALITY WIR LightGRID+ In-Fixture Module ✓-✓--✓✓Gateway -WIR NXW NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor ✓✓✓--✓✓✓-NXRM2-H NXWS16F NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming ✓✓✓✓✓✓✓✓16ft NXSMP2-LMO NXWS40F NX Networked Wireless Enabled Integral NXSMP2-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming ✓✓✓✓✓✓✓✓40ft NXSMP2-HMO BTSO-12F Bluetooth® Programmable, BTSMP-OMNI-O PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓12ft BTSMP-OMNI-O BTS-14F Bluetooth® Programmable, BTSMP-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓14ft BTSMP-LMO BTS-40F Bluetooth® Programmable, BTSMP-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓40ft BTSMP-HMO CONTROLS TECH SUPPORT 800-888-8006 (7:00 AM - 7:00 PM)NX LIGHTING CONTROLS FREE APP The NX Lighting Controls App is free to use mobile application for programming both NX Lighting Controls System or Standalone Bluetooth Sensors. The mobile app allows you to configure devices, discover and setup wireless enable luminiares and program NX system settings. Apple App: https://apps.apple.com/us/app/nx-lighting-controls/id962112904 Google Play: https://play.google.com/store/apps/details?id=io.cordova.NXBTR&hl=en_US&gl=US Apple App Google Play Occupancy Sensor Enabled Occupancy Sensor Sensitivity 7 Occupancy Sensor Timeout 15 Minutes Occupied Dim Level 100% Unoccupied Dim Level 0% Daylight Sensor Disabled Bluetooth Enabled 2.4GHz Wireless Mesh On "Passcode Factory Passcode: HubbN3T!"Enabled Occupancy Sensor Enabled Occupancy Sensor Sensitivity 7 Occupancy Sensor Timeout 8 Minutes Occupied Dim Level 100% Unoccupied Dim Level 50% Daylight Sensor Disabled DEFAULT SETTINGS NX WirelessStand AloneSensor Lens Coverage and Detection PatternsWhen Mounted at 40ft and 45ft with Standard Lens NXSMP2-HMO 45' Indoor Mounting Height30' Outdoor Mounting Height 56' at 40' Mounting Height 63' at 45' Mounting Height 40' Outdoor Mounting Height45' Intdoor Mounting HeightSensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens NXSMP2-LMO 24' 48' 0 824 241818121288404 Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens NXSMP2-LMO 24' 48' 0 824 241818121288404 Minor Motion Major Motion NXSMP2-OMNI 12' (3.7m) 22' (6.7m) Minor Motion Major Motion NXSMP2-OMNI 12' (3.7m) 22' (6.7m) NX WIRELESS COVERAGE PATTERNS currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 3 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK Control Option Ordering Logic & Description Control Option Functionality Control Option ComponentsNetworkableGroupingSchedulingOccupancy/ Motion Daylight Harvesting 0-10V Dimming On/Off Control Bluetooth App Programming Sensor Height IndependentDATE:LOCATION: TYPE:PROJECT: CATALOG #: SCP_F Sensor Control Programmable, sensor range, reference product specification for height selections ---✓✓✓✓-8ft or 40ft SCP_F 7PR 7-Pin Receptacle --Paired with external control -Paired with external control -Paired with external control --7PR OUTDOOR LIGHTING CONTROLS OPTIONS CONTROLS FUNCTIONALITY COVERAGE PATTERNS FOR SCP_F Lens Coverage GuideNo: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China SPECIFICATIONS Operating Temperature- ....................40° to 167°F (-40° to 75°C IP Rating when mounted to outdoor rated fixture ................IP-66 DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View 800.879.8585www.legrand.us/wattstopper No. 24226 – 08/16 rev. 1 © Copyright 2016 Legrand All Rights Reserved.© Copyright 2016 Tous droits réservés Legrand.© Copyright 2016 Legrand Todos los derechos reservados. Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation. Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper ne peut être tenu responsable de tout dommage consécutif causé par ou lié à l’utilisation ou à la performance de ce produit ou tout autre dommage indirect lié à la perte de propriété, de revenus, ou de profits, ou aux coûts d’enlèvement, d’installation ou de réinstallation. Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No existen obligaciones ni responsabilidades por parte de Wattstopper por daños consecuentes que se deriven o estén relacionados con el uso o el rendimiento de este producto u otros daños indirectos con respecto a la pérdida de propiedad, renta o ganancias, o al costo de extracción, instalación o reinstalación. WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA 3.2"81.3mm 1.04"26.4mm FSP‑L7: 360° Coverage The FSP-L7 has a lens that covers a 100' diameter area at a height of 40'. 0'10'10'20'20'30'30'40'40' 0' 27' 40'50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View Lens Coverage GuideNo: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China SPECIFICATIONS Operating Temperature- ....................40° to 167°F (-40° to 75°C IP Rating when mounted to outdoor rated fixture ................IP-66 DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View anties its products to be free erials and workmanship for a ears. There are no obligations Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No ANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA "mm 1.04"26.4mm Coverage s a lens that covers a 100' diameter area at 0'10'10'20'20'30'30'40'40' 0' 27' 40' 50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' 800.879.8585 www.legrand.us/wattstopper No. 24226 – 08/16 rev. 1 © Copyright 2016 Legrand All Rights Reserved.© Copyright 2016 Tous droits réservés Legrand.© Copyright 2016 Legrand Todos los derechos reservados. Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation. Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper ne peut être tenu responsable de tout dommage consécutif causé par ou lié à l’utilisation ou à la performance de ce produit ou tout autre dommage indirect lié à la perte de propriété, de revenus, ou de profits, ou aux coûts d’enlèvement, d’installation ou de réinstallation. Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No existen obligaciones ni responsabilidades por parte de Wattstopper por daños consecuentes que se deriven o estén relacionados con el uso o el rendimiento de este producto u otros daños indirectos con respecto a la pérdida de propiedad, renta o ganancias, o al costo de extracción, instalación o reinstalación. WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA 3.2"81.3mm 1.04"26.4mm FSP‑L7: 360° Coverage The FSP-L7 has a lens that covers a 100' diameter area at a height of 40'. 0'10'10'20'20'30'30'40'40' 0' 27' 40'50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 4 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: Description Nominal Wattage System Watts Dist. Type 5K (5000K NOMINAL 70 CRI)4K (4000K NOMINAL 70 CRI)3K (3000K NOMINAL 70 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G RWL1 10 10.1 3 1362 135 0 0 1 1355 134 0 0 1 1303 129 0 0 1 4W 1343 133 0 0 1 1336 132 0 0 1 1285 127 0 0 1 15 14.5 3 1972 136 1 0 1 1962 135 1 0 1 1887 130 1 0 1 4W 1945 134 0 0 1 1935 133 0 0 1 1861 128 0 0 1 20 19.9 3 2722 137 1 0 1 2709 136 1 0 1 2605 131 1 0 1 4W 2685 135 1 0 1 2672 134 1 0 1 2569 129 1 0 1 25 28.0 3 3749 134 1 0 1 3732 133 1 0 1 3588 128 1 0 1 4W 3698 132 1 0 1 3680 131 1 0 1 3538 126 1 0 1 35 36.9 3 4751 129 1 0 2 4728 128 1 0 2 4546 123 1 0 1 4W 4685 127 1 0 2 4663 126 1 0 2 4483 121 1 0 2 45 46.5 3 5812 125 1 0 2 5784 124 1 0 2 5562 120 1 0 2 4W 5731 123 1 0 2 5704 123 1 0 2 5485 118 1 0 2 RWL2 45 46.1 2 6701 145 1 0 2 6668 145 1 0 2 6412 139 1 0 2 3 6812 148 1 0 2 6780 147 1 0 2 6519 141 1 0 2 4W 6678 145 1 0 2 6646 144 1 0 2 6390 139 1 0 2 50 54.0 2 7747 143 1 0 2 7710 143 1 0 2 7413 137 1 0 2 3 7876 146 1 0 2 7838 145 1 0 2 7537 140 1 0 2 4W 7720 143 1 0 2 7683 142 1 0 2 7388 137 1 0 2 65 67.2 2 9539 142 1 0 2 9494 141 1 0 2 9129 136 1 0 2 3 9699 144 2 0 2 9652 144 2 0 2 9281 138 2 0 2 4W 9507 141 2 0 2 9461 141 2 0 2 9097 135 2 0 2 80 80.8 2 11228 139 2 0 2 11174 138 2 0 2 10745 133 2 0 2 3 11416 141 2 0 2 11361 141 2 0 2 10924 135 2 0 2 4W 11190 138 2 0 2 11136 138 2 0 2 10708 133 2 0 2 95 93.2 2 13148 141 2 0 2 13085 140 2 0 2 12582 135 2 0 2 3 13368 143 2 0 2 13304 143 2 0 2 12792 137 2 0 2 4W 13103 141 2 0 2 13040 140 2 0 2 12539 135 2 0 2 115 109.8 2 15102 138 2 0 3 15030 137 2 0 3 14452 132 2 0 3 3 15354 140 2 0 3 15281 139 2 0 3 14693 134 2 0 3 4W 15050 137 2 0 3 14978 136 2 0 3 14402 131 2 0 3 135 137.1 2 17533 128 2 0 3 17449 127 2 0 3 16778 122 2 0 3 3 17826 130 2 0 3 17740 129 2 0 3 17058 124 2 0 3 4W 17473 127 2 0 3 17389 127 2 0 3 16720 122 2 0 3 155 156.8 2 19495 124 2 0 3 19402 124 2 0 3 18656 119 2 0 3 3 19821 126 2 0 3 19726 126 2 0 3 18967 121 2 0 3 4W 19542 125 2 0 3 19448 124 2 0 3 18700 119 2 0 3 PERFORMANCE DATA: MICROSTRIKE currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 5 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: PERFORMANCE DATA: STRIKE Description Nominal Wattage System Watts Dist. Type 5K (5000K NOMINAL 70 CRI)4K (4000K NOMINAL 70 CRI)3K (3000K NOMINAL 70 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G RWL2 39 45.1 2 5618 125 1 0 1 5723 127 1 0 1 5251 116 1 0 1 3 5644 125 1 0 2 5749 127 1 0 2 5274 117 1 0 2 4F 5662 126 1 0 2 5768 128 1 0 2 5291 117 1 0 2 4W 5652 125 1 0 2 5757 128 1 0 2 5282 117 1 0 2 55 63.1 2 7458 118 1 0 2 7659 121 1 0 2 6970 110 1 0 2 3 7552 120 1 0 2 7694 122 1 0 2 7058 112 1 0 2 4F 7577 120 1 0 2 7718 122 1 0 2 7081 112 1 0 2 4W 7564 120 1 0 3 7705 122 1 0 3 7069 112 1 0 3 85 88.0 2 10121 115 2 0 2 10311 117 2 0 2 9459 107 2 0 2 3 10167 116 1 0 3 10357 118 1 0 3 9502 108 1 0 3 4F 10200 116 1 0 2 10390 118 1 0 2 9532 108 1 0 2 4W 10182 116 1 0 3 10372 118 1 0 3 9516 108 1 0 3 105 111.7 2 12022 108 2 0 2 12247 110 2 0 2 11235 101 2 0 2 3 12075 108 2 0 3 12301 110 2 0 3 11285 101 2 0 3 4F 12115 108 1 0 3 12341 110 1 0 3 11322 101 1 0 2 4W 12093 108 2 0 3 12319 110 2 0 3 11302 101 1 0 3 120 126.2 2 12889 102 2 0 2 13130 104 2 0 2 12046 95 2 0 2 3 12947 103 2 0 3 13189 105 2 0 3 12100 96 2 0 3 4F 12989 103 1 0 3 13232 105 1 0 3 12139 96 1 0 3 4W 12966 103 2 0 3 13208 105 2 0 3 12118 96 1 0 3 currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 6 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL1 10 120 0.08 10.1 208 0.05 240 0.042770.043470.034800.02 15 120 0.12 14.5 208 0.072400.06 277 0.053470.04 480 0.03 20 120 0.17 19.9 208 0.102400.08 277 0.073470.06 480 0.04 25 120 0.23 28.0 208 0.132400.12 277 0.103470.08 480 0.06 35 120 0.31 36.9 208 0.182400.15 277 0.133470.114800.08 45 120 0.39 46.5 208 0.22 240 0.192770.17 347 0.134800.10 # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL2 45 120 0.38 46.1 208 0.22 240 0.192770.173470.134800.10 50 120 0.45 54.0 208 0.262400.23 277 0.193470.16 480 0.11 65 120 0.56 67.2 208 0.322400.28 277 0.243470.19 480 0.14 80 120 0.67 80.8 208 0.392400.34 277 0.293470.23 480 0.17 95 120 0.78 93.2 208 0.452400.39 277 0.343470.274800.19 115 120 0.92 109.8 208 0.53 240 0.462770.40 347 0.324800.23 135 120 1.14 137.1 208 0.66 240 0.572770.49 347 0.404800.29 155 120 1.31 156.8 208 0.75 240 0.652770.57 347 0.454800.33 Ambient Temperature Lumen Multiplier 0°C 32°F 1.03 10°C 50°F 1.01 20°C 68°F 1.00 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 50°C 122°F 0.97 LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) PROJECTED LUMEN MAINTENANCE MULTIPLIER ELECTRICAL DATA: MICROSTRIKE Micro Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.841 – 3000K 0.977 0.861 0.647 3500K –0.900 – 4000K 1 0.926 0.699 5000K 1 0.937 0.791 OPERATING HOURS Ambient Temp.0 25,000 TM-21-22 60,000 25°C / 77°F 1.00 0.91 0.83 40°C / 104°F 0.99 0.90 0.82 Lumen maintenance values calculated per TM-21 using six times the LM-80 test time for the LED and in-situ thermal testing of the luminaire. Strike Lumen Multiplier CCT 70CRI 80CRI 90CRI 2700K 0.900 0.810 0.62 3000K 0.933 0.853 0.659 3500K 0.959 0.894 0.711 4000K 1.000 0.900 0.732 5000K 1.000 0.900 0.732 Monochromatic Amber Multiplier Amber See Amber Spec Sheet currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 7 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: ELECTRICAL DATA: STRIKE # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL2 39 120 0.38 45.1 208 0.222400.19 277 0.163470.13 480 0.09 55 120 0.53 63.1 208 0.302400.262770.233470.184800.13 85 120 0.73 88.0 208 0.422400.372770.32 347 0.254800.18 105 120 0.93 111.7 208 0.54 240 0.472770.40 347 0.324800.23 120 120 1.05 126.2 208 0.61 240 0.532770.46 347 0.364800.26 Type 2 Mounting Height: 30ft Type 3 Type 4WType 4F PHOTOMETRY currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 8 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: A B C D E 8.7" 9.7" 3.9" 7.0" 5.0" 221mm 246mm 99mm 178mm 127mm F G H 10.4" 11.0" 5.9" 264mm 279mm 150mm Weight 6.5 lbs (2.95 kgs) 7 54 9.73 8.73 7 11 5 4 9.73 5.85 10.37 8.73 A F G H C B D E RWL1 RWL1 with Integral Back Box N O P 15.4" 16.0" 5.5" 391mm 406mm 140mm I J K L M 14.0" 15.0" 3.9" 12.0" 5.0" 356mm 381mm 99mm 305mm 127mm Weight 16.5 lbs (7.48 kgs) 15.37 16 5.54 15 3.88 12 5 15.37 16 5.54 N O I J K P L M RWL2 RWL2 with Integral Back Box 4.92 5.91 2.07 Q R S 4.9" 5.9" 2.1" 124mm 150mm 53mm Q R Back Box Accessory 4.92 5.91 2.07S currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 9 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DIMENSIONS DATE:LOCATION: TYPE:PROJECT: CATALOG #: NXSP-14F NXSP-40F Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens Coverage and Detection PatternsWhen Mounted at 30ft and 45ft with Standard Lens 24' 48' 2.3” 1.3” 3.5” 2.3''58 mm 3.5''89 mm 1.3''33 mm 2.3” 1.3” 3.5” 2.3''58 mm 3.5''89 mm 1.3''33 mm 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0 '1 0'20'20' 60 ft 30'30'30' 0' 8' '7'3'3'07'11'11'24'24' SCP-8F A B 2.3"(59mm).8" (20mm) 60 ft 0' 0' 10' 10' 20' 20' 30' 30'10'10'20'30'20'30' 24' 11' 7' 3' 0' 3' 7' 11' 24' 0' 8' A B ADDITIONAL INFORMATION 2.33”59.2mm 0.78”19.7mm '3'0'3'6'9'21'9'6 12' 10' 20' 0' 15' Ceiling 5' '02'81'511 5'18'20'20'1 0'0'10'20' 0' 20' 10' 10' 20' 40 ft40 ft 0' 0' 10' 10' 20' 20'20' 15' 10' 5' 0' Ceiling 10'10'20'20'20' 18' 15' 12' 9' 6' 3' 0' 3' 6' 9' 12' 15' 18' 20' A B 2.3"(59mm).8" (20mm) A B SCP-2OF currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 10 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: • Low profile LED wall luminaire with a variety of IES distributions for lighting applications such as retail, commercial and industrial building mount • Featuring Strike and Micro Strike Optics which maximizes target zone illumination with minimal losses at the house-side, reducing light trespass issues • Visual comfort standard • Control options including photo control, occupancy sensing, NX Distributed Intelligence™, LightGRID+ and 7-Pin with networked controls • Battery Backup options available for emergency code compliance • Quick-mount adapter allows easy installation/maintenance • 347V and 480V versions for industrial applications and Canada DATE:LOCATION: TYPE:PROJECT: CONSTRUCTION • Die-cast housing with hidden vertical heat fins that are optimal for heat dissipation while keeping a clean smooth outer surface • Corrosion resistant, die-cast aluminum housing with powder coat paint finish • Powder paint finish provides durability in outdoor environments. Tested to meet 1000 hour salt spray rating OPTICS• Entire optical aperture illuminates to create a larger luminous surface area resulting in a low glare appearance without sacrificing optical performance • 48 or 160 midpower LEDs • 3000K, 4000K or 5000K (70 CRI/80 CRI) CCT • Zero uplight distributions • LED optics provide IES type II, III and IV distributions. Type II only available in RWL2 configurations INSTALLATION• Quick-mount adapter provides easy installation to wall or to recessed junction boxes (4" square junction box) • Designed for direct j-box mount. • Integral back box contains 1/2” conduit hubs • Integral backbox provided as standard with selection of some options ELECTRICAL• 120V-277V universal voltage 50/60Hz 0-10V dimming drivers • 347V and 480V dimmable driver option for all wattages above 35W • Ambient operating temperature -40˚C to 40˚C • Driver RoHS and IP66 CONTROLS (CONTINUED)• Dual Driver and Dual Power Feed options creates product configuration with 2 internal drivers for code compliance • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application. • LightGRID+ available with in fixture wireless control module, features dimming and occupancy sensor. Also available in 7-pin configuration CERTIFICATIONS • Certified to UL 1598 and CSA 22.2#250.0-24 for wet locations • IP65 rated housing • DLC® (DesignLights Consortium Qualified), with some Premium Qualified configurations. Not all product variations listed in this document are DLC® qualified. Refer to http://www.designlights.org for the most up-to-date list. • Emergency battery backup options are California Energy Commission (CEC) Title 20 Compliant • Meets IDA requirements using 3K CCT configuration at 0 degrees or tilt WARRANTY • 5 year limited warranty ELECTRICAL (CONTINUED) • 10kV Surge Protector optional • Drivers have greater than .90 power factor and less than 20% Total Harmonic Distortion • Dual Driver option provides 2 drivers within luminaire but only one set of leads exiting the luminaire, where Dual Power Feed provides two drivers which can be wired independently as two sets of leads are extended from the luminaire. Both options can not be included in one same fixture. • Dimming drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than 6” standard. CONTROLS• Photo control, occupancy sensor and wireless available for complete on/off and dimming control • Button photocontrol is suitable for 120-277V operation • 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately) • NX Distributed Intelligence™ available with in fixture wireless control module, features dimming and occupancy sensor LightGRID+ available with in fixture wireless control module, features dimming and occupancy sensor • Integral Battery Backup provides emergency lighting for the required 90 minute path of egress • Battery Backup suitable for operating temperatures -25˚C to 40˚C. RWL1 battery is 12.5W RWL2 battery is 18W CATALOG #: SERVICE PROGRAM 7 11 54 9.73 5.85 10.37 8.73 RWL1 15.37 16 5.54 15 3.88 12 5 RWL2 Weight RWL1 6.5 lbs / 2.95 kg RWL2 16.5 lbs / 7.48 kg 8.7" 9.7" 7.0" 3.9"5.0" 14.0" 15.0" 3.9" 12.0" 5.0" FEATURES SPECIFICATIONS CONTROL TECHNOLOGY currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 1 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK – Control Options Network Distribution NXW NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor 2, 7, 12 NXWS16F NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming 2, 7, 12 NXWS40F NX Networked Wireless Enabled Integral NXSMP2-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming 2, 7, 12 WIR LightGRID+ In-Fixture Module 2, 9 Stand Alone Sensors SCP-8F Remote control programmable line voltage sensor 4, 5, 6, 8 SCP-20F Remote control programmable line voltage sensor 4, 5, 6, 8 BTS-14F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 1, 2, 5, 7, 8 BTS-40F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 1, 2, 5, 7, 8 BTSO-12F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor, up to 12' mounting height 1, 2, 5, 7, 8 Control Options 7PR_7-Pin Receptacle 8, 9 F Fusing 4 E Emergency Battery Backup 3, 8, 9 EH Emergency Battery w/ Heater Option 3, 8, 9 2DR Dual Driver 3, 9, 10 2PF Dual Power Feed 3, 9, 10 PC Button Photocontrol 5, 6, 11 SP 10kA Surge Protector 11 DATE:LOCATION: TYPE:PROJECT: CATALOG #: Example: RWL1–48L-10–3K7–2–UNV–BLS–E CATALOG # Control Options Standalone SCPREMOTE Order at least one per project location to program and control Notes: 1 replace "xxx" with color option Catalog Number Description WP-BB-XXX Accessory for conduit entry 1 –––––– Series # LEDs - Wattage CCT/CRI Distribution Voltage Color RWL1 Micro Strike Optics RWL2 Micro Strike Optics RWL2 Strike Optics 48L-10 1,000 Lumens 48L-15 2,000 Lumens 48L-20 2,500 Lumens 5, 6 48L-25 3,500 Lumens 48L-35 4,500 Lumens 48L-45 5,500 Lumens 5, 6 160L-45 6,500 Lumens 160L-50 7,500 Lumens 160L-65 9,500 Lumens 160L-80 11,000 Lumens 160L-95 13,000 Lumens 160L-115 15,000 Lumens 160L-135 17,500 Lumens 160L-155 19,500 Lumens 36L-39 5,500 Lumens, Strike 36L-55 7,500 Lumens, Strike 36L-85 10,000 Lumens, Strike 36L-105 12,500 Lumens, Strike 36L-120 14,000 Lumens, Strike 3K7 3000K, 70 CRI 4K7 4000K, 70 CRI 5K7 5000K, 70 CRI 3K8 3000K, 80 CRI 4K8 4000K, 80 CRI 5K8 5000K, 80 CRI 2 IES TYPE II 3 IES TYPE III 4F IES TYPE IV Forward 4W IES TYPE IV Wide UNV 120-277V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Matte Textured PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color Notes: 1 Not available in RWL1 2 Cannot be combined with E, EH, 2DR, 2PF due to space constraints 3 Cannot be combined with Controls due to space constraints 4 Must specify voltage 5 Not available in 347V 6 Not available in 480V 7 Available in 480V in 95W, 115W, 155W only 8 Cannot be combined with 2DR or 2PF 9 Located in integral backbox which will be automatically added to the fixture if selected 10 Not available in RWL1-48L in 10W, 15W, or 20W 11 SP and PC cannot be combined due to space constraints 12 SP and PC cannot be combined due to space constraints *Based on space limitations, some options may not be combined. Consult Factory. = Service ProgramLimit of 15 luminairesGray Shading ORDERING GUIDE CONTROLS ACCESSORIES AND REPLACEMENT PARTS - MADE TO ORDER currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 2 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: OUTDOOR LIGHTING CONTROLS OPTIONS Control Option Ordering Logic & Description Control Option Functionality Control Option ComponentsNetworkableGroupingSchedulingOccupancy/ Motion Daylight Harvesting 0-10V Dimming On/Off Control Bluetooth App Programming Sensor Height NX WirelessLightGRID+IndependentCONTROLS FUNCTIONALITY WIR LightGRID+ In-Fixture Module ✓-✓--✓✓Gateway -WIR NXW NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor ✓✓✓--✓✓✓-NXRM2-H NXWS16F NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming ✓✓✓✓✓✓✓✓16ft NXSMP2-LMO NXWS40F NX Networked Wireless Enabled Integral NXSMP2-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming ✓✓✓✓✓✓✓✓40ft NXSMP2-HMO BTSO-12F Bluetooth® Programmable, BTSMP-OMNI-O PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓12ft BTSMP-OMNI-O BTS-14F Bluetooth® Programmable, BTSMP-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓14ft BTSMP-LMO BTS-40F Bluetooth® Programmable, BTSMP-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓40ft BTSMP-HMO CONTROLS TECH SUPPORT 800-888-8006 (7:00 AM - 7:00 PM)NX LIGHTING CONTROLS FREE APP The NX Lighting Controls App is free to use mobile application for programming both NX Lighting Controls System or Standalone Bluetooth Sensors. The mobile app allows you to configure devices, discover and setup wireless enable luminiares and program NX system settings. Apple App: https://apps.apple.com/us/app/nx-lighting-controls/id962112904 Google Play: https://play.google.com/store/apps/details?id=io.cordova.NXBTR&hl=en_US&gl=US Apple App Google Play Occupancy Sensor Enabled Occupancy Sensor Sensitivity 7 Occupancy Sensor Timeout 15 Minutes Occupied Dim Level 100% Unoccupied Dim Level 0% Daylight Sensor Disabled Bluetooth Enabled 2.4GHz Wireless Mesh On "Passcode Factory Passcode: HubbN3T!"Enabled Occupancy Sensor Enabled Occupancy Sensor Sensitivity 7 Occupancy Sensor Timeout 8 Minutes Occupied Dim Level 100% Unoccupied Dim Level 50% Daylight Sensor Disabled DEFAULT SETTINGS NX WirelessStand AloneSensor Lens Coverage and Detection PatternsWhen Mounted at 40ft and 45ft with Standard Lens NXSMP2-HMO 45' Indoor Mounting Height30' Outdoor Mounting Height 56' at 40' Mounting Height 63' at 45' Mounting Height 40' Outdoor Mounting Height45' Intdoor Mounting HeightSensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens NXSMP2-LMO 24' 48' 0 824 241818121288404 Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens NXSMP2-LMO 24' 48' 0 824 241818121288404 Minor Motion Major Motion NXSMP2-OMNI 12' (3.7m) 22' (6.7m) Minor Motion Major Motion NXSMP2-OMNI 12' (3.7m) 22' (6.7m) NX WIRELESS COVERAGE PATTERNS currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 3 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK Control Option Ordering Logic & Description Control Option Functionality Control Option ComponentsNetworkableGroupingSchedulingOccupancy/ Motion Daylight Harvesting 0-10V Dimming On/Off Control Bluetooth App Programming Sensor Height IndependentDATE:LOCATION: TYPE:PROJECT: CATALOG #: SCP_F Sensor Control Programmable, sensor range, reference product specification for height selections ---✓✓✓✓-8ft or 40ft SCP_F 7PR 7-Pin Receptacle --Paired with external control -Paired with external control -Paired with external control --7PR OUTDOOR LIGHTING CONTROLS OPTIONS CONTROLS FUNCTIONALITY COVERAGE PATTERNS FOR SCP_F Lens Coverage GuideNo: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China SPECIFICATIONS Operating Temperature- ....................40° to 167°F (-40° to 75°C IP Rating when mounted to outdoor rated fixture ................IP-66 DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View 800.879.8585www.legrand.us/wattstopper No. 24226 – 08/16 rev. 1 © Copyright 2016 Legrand All Rights Reserved.© Copyright 2016 Tous droits réservés Legrand.© Copyright 2016 Legrand Todos los derechos reservados. Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation. Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper ne peut être tenu responsable de tout dommage consécutif causé par ou lié à l’utilisation ou à la performance de ce produit ou tout autre dommage indirect lié à la perte de propriété, de revenus, ou de profits, ou aux coûts d’enlèvement, d’installation ou de réinstallation. Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No existen obligaciones ni responsabilidades por parte de Wattstopper por daños consecuentes que se deriven o estén relacionados con el uso o el rendimiento de este producto u otros daños indirectos con respecto a la pérdida de propiedad, renta o ganancias, o al costo de extracción, instalación o reinstalación. WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA 3.2"81.3mm 1.04"26.4mm FSP‑L7: 360° Coverage The FSP-L7 has a lens that covers a 100' diameter area at a height of 40'. 0'10'10'20'20'30'30'40'40' 0' 27' 40'50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View Lens Coverage GuideNo: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China SPECIFICATIONS Operating Temperature- ....................40° to 167°F (-40° to 75°C IP Rating when mounted to outdoor rated fixture ................IP-66 DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View anties its products to be free erials and workmanship for a ears. There are no obligations Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No ANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA "mm 1.04"26.4mm Coverage s a lens that covers a 100' diameter area at 0'10'10'20'20'30'30'40'40' 0' 27' 40' 50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' 800.879.8585 www.legrand.us/wattstopper No. 24226 – 08/16 rev. 1 © Copyright 2016 Legrand All Rights Reserved.© Copyright 2016 Tous droits réservés Legrand.© Copyright 2016 Legrand Todos los derechos reservados. Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation. Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper ne peut être tenu responsable de tout dommage consécutif causé par ou lié à l’utilisation ou à la performance de ce produit ou tout autre dommage indirect lié à la perte de propriété, de revenus, ou de profits, ou aux coûts d’enlèvement, d’installation ou de réinstallation. Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No existen obligaciones ni responsabilidades por parte de Wattstopper por daños consecuentes que se deriven o estén relacionados con el uso o el rendimiento de este producto u otros daños indirectos con respecto a la pérdida de propiedad, renta o ganancias, o al costo de extracción, instalación o reinstalación. WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA 3.2"81.3mm 1.04"26.4mm FSP‑L7: 360° Coverage The FSP-L7 has a lens that covers a 100' diameter area at a height of 40'. 0'10'10'20'20'30'30'40'40' 0' 27' 40'50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 4 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: Description Nominal Wattage System Watts Dist. Type 5K (5000K NOMINAL 70 CRI)4K (4000K NOMINAL 70 CRI)3K (3000K NOMINAL 70 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G RWL1 10 10.1 3 1362 135 0 0 1 1355 134 0 0 1 1303 129 0 0 1 4W 1343 133 0 0 1 1336 132 0 0 1 1285 127 0 0 1 15 14.5 3 1972 136 1 0 1 1962 135 1 0 1 1887 130 1 0 1 4W 1945 134 0 0 1 1935 133 0 0 1 1861 128 0 0 1 20 19.9 3 2722 137 1 0 1 2709 136 1 0 1 2605 131 1 0 1 4W 2685 135 1 0 1 2672 134 1 0 1 2569 129 1 0 1 25 28.0 3 3749 134 1 0 1 3732 133 1 0 1 3588 128 1 0 1 4W 3698 132 1 0 1 3680 131 1 0 1 3538 126 1 0 1 35 36.9 3 4751 129 1 0 2 4728 128 1 0 2 4546 123 1 0 1 4W 4685 127 1 0 2 4663 126 1 0 2 4483 121 1 0 2 45 46.5 3 5812 125 1 0 2 5784 124 1 0 2 5562 120 1 0 2 4W 5731 123 1 0 2 5704 123 1 0 2 5485 118 1 0 2 RWL2 45 46.1 2 6701 145 1 0 2 6668 145 1 0 2 6412 139 1 0 2 3 6812 148 1 0 2 6780 147 1 0 2 6519 141 1 0 2 4W 6678 145 1 0 2 6646 144 1 0 2 6390 139 1 0 2 50 54.0 2 7747 143 1 0 2 7710 143 1 0 2 7413 137 1 0 2 3 7876 146 1 0 2 7838 145 1 0 2 7537 140 1 0 2 4W 7720 143 1 0 2 7683 142 1 0 2 7388 137 1 0 2 65 67.2 2 9539 142 1 0 2 9494 141 1 0 2 9129 136 1 0 2 3 9699 144 2 0 2 9652 144 2 0 2 9281 138 2 0 2 4W 9507 141 2 0 2 9461 141 2 0 2 9097 135 2 0 2 80 80.8 2 11228 139 2 0 2 11174 138 2 0 2 10745 133 2 0 2 3 11416 141 2 0 2 11361 141 2 0 2 10924 135 2 0 2 4W 11190 138 2 0 2 11136 138 2 0 2 10708 133 2 0 2 95 93.2 2 13148 141 2 0 2 13085 140 2 0 2 12582 135 2 0 2 3 13368 143 2 0 2 13304 143 2 0 2 12792 137 2 0 2 4W 13103 141 2 0 2 13040 140 2 0 2 12539 135 2 0 2 115 109.8 2 15102 138 2 0 3 15030 137 2 0 3 14452 132 2 0 3 3 15354 140 2 0 3 15281 139 2 0 3 14693 134 2 0 3 4W 15050 137 2 0 3 14978 136 2 0 3 14402 131 2 0 3 135 137.1 2 17533 128 2 0 3 17449 127 2 0 3 16778 122 2 0 3 3 17826 130 2 0 3 17740 129 2 0 3 17058 124 2 0 3 4W 17473 127 2 0 3 17389 127 2 0 3 16720 122 2 0 3 155 156.8 2 19495 124 2 0 3 19402 124 2 0 3 18656 119 2 0 3 3 19821 126 2 0 3 19726 126 2 0 3 18967 121 2 0 3 4W 19542 125 2 0 3 19448 124 2 0 3 18700 119 2 0 3 PERFORMANCE DATA: MICROSTRIKE currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 5 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: PERFORMANCE DATA: STRIKE Description Nominal Wattage System Watts Dist. Type 5K (5000K NOMINAL 70 CRI)4K (4000K NOMINAL 70 CRI)3K (3000K NOMINAL 70 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G RWL2 39 45.1 2 5618 125 1 0 1 5723 127 1 0 1 5251 116 1 0 1 3 5644 125 1 0 2 5749 127 1 0 2 5274 117 1 0 2 4F 5662 126 1 0 2 5768 128 1 0 2 5291 117 1 0 2 4W 5652 125 1 0 2 5757 128 1 0 2 5282 117 1 0 2 55 63.1 2 7458 118 1 0 2 7659 121 1 0 2 6970 110 1 0 2 3 7552 120 1 0 2 7694 122 1 0 2 7058 112 1 0 2 4F 7577 120 1 0 2 7718 122 1 0 2 7081 112 1 0 2 4W 7564 120 1 0 3 7705 122 1 0 3 7069 112 1 0 3 85 88.0 2 10121 115 2 0 2 10311 117 2 0 2 9459 107 2 0 2 3 10167 116 1 0 3 10357 118 1 0 3 9502 108 1 0 3 4F 10200 116 1 0 2 10390 118 1 0 2 9532 108 1 0 2 4W 10182 116 1 0 3 10372 118 1 0 3 9516 108 1 0 3 105 111.7 2 12022 108 2 0 2 12247 110 2 0 2 11235 101 2 0 2 3 12075 108 2 0 3 12301 110 2 0 3 11285 101 2 0 3 4F 12115 108 1 0 3 12341 110 1 0 3 11322 101 1 0 2 4W 12093 108 2 0 3 12319 110 2 0 3 11302 101 1 0 3 120 126.2 2 12889 102 2 0 2 13130 104 2 0 2 12046 95 2 0 2 3 12947 103 2 0 3 13189 105 2 0 3 12100 96 2 0 3 4F 12989 103 1 0 3 13232 105 1 0 3 12139 96 1 0 3 4W 12966 103 2 0 3 13208 105 2 0 3 12118 96 1 0 3 currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 6 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL1 10 120 0.08 10.1 208 0.05 240 0.042770.043470.034800.02 15 120 0.12 14.5 208 0.072400.06 277 0.053470.04 480 0.03 20 120 0.17 19.9 208 0.102400.08 277 0.073470.06 480 0.04 25 120 0.23 28.0 208 0.132400.12 277 0.103470.08 480 0.06 35 120 0.31 36.9 208 0.182400.15 277 0.133470.114800.08 45 120 0.39 46.5 208 0.22 240 0.192770.17 347 0.134800.10 # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL2 45 120 0.38 46.1 208 0.22 240 0.192770.173470.134800.10 50 120 0.45 54.0 208 0.262400.23 277 0.193470.16 480 0.11 65 120 0.56 67.2 208 0.322400.28 277 0.243470.19 480 0.14 80 120 0.67 80.8 208 0.392400.34 277 0.293470.23 480 0.17 95 120 0.78 93.2 208 0.452400.39 277 0.343470.274800.19 115 120 0.92 109.8 208 0.53 240 0.462770.40 347 0.324800.23 135 120 1.14 137.1 208 0.66 240 0.572770.49 347 0.404800.29 155 120 1.31 156.8 208 0.75 240 0.652770.57 347 0.454800.33 Ambient Temperature Lumen Multiplier 0°C 32°F 1.03 10°C 50°F 1.01 20°C 68°F 1.00 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 50°C 122°F 0.97 LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) PROJECTED LUMEN MAINTENANCE MULTIPLIER ELECTRICAL DATA: MICROSTRIKE Micro Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.841 – 3000K 0.977 0.861 0.647 3500K –0.900 – 4000K 1 0.926 0.699 5000K 1 0.937 0.791 OPERATING HOURS Ambient Temp.0 25,000 TM-21-22 60,000 25°C / 77°F 1.00 0.91 0.83 40°C / 104°F 0.99 0.90 0.82 Lumen maintenance values calculated per TM-21 using six times the LM-80 test time for the LED and in-situ thermal testing of the luminaire. Strike Lumen Multiplier CCT 70CRI 80CRI 90CRI 2700K 0.900 0.810 0.62 3000K 0.933 0.853 0.659 3500K 0.959 0.894 0.711 4000K 1.000 0.900 0.732 5000K 1.000 0.900 0.732 Monochromatic Amber Multiplier Amber See Amber Spec Sheet currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 7 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: ELECTRICAL DATA: STRIKE # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL2 39 120 0.38 45.1 208 0.222400.19 277 0.163470.13 480 0.09 55 120 0.53 63.1 208 0.302400.262770.233470.184800.13 85 120 0.73 88.0 208 0.422400.372770.32 347 0.254800.18 105 120 0.93 111.7 208 0.54 240 0.472770.40 347 0.324800.23 120 120 1.05 126.2 208 0.61 240 0.532770.46 347 0.364800.26 Type 2 Mounting Height: 30ft Type 3 Type 4WType 4F PHOTOMETRY currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 8 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: A B C D E 8.7" 9.7" 3.9" 7.0" 5.0" 221mm 246mm 99mm 178mm 127mm F G H 10.4" 11.0" 5.9" 264mm 279mm 150mm Weight 6.5 lbs (2.95 kgs) 7 54 9.73 8.73 7 11 5 4 9.73 5.85 10.37 8.73 A F G H C B D E RWL1 RWL1 with Integral Back Box N O P 15.4" 16.0" 5.5" 391mm 406mm 140mm I J K L M 14.0" 15.0" 3.9" 12.0" 5.0" 356mm 381mm 99mm 305mm 127mm Weight 16.5 lbs (7.48 kgs) 15.37 16 5.54 15 3.88 12 5 15.37 16 5.54 N O I J K P L M RWL2 RWL2 with Integral Back Box 4.92 5.91 2.07 Q R S 4.9" 5.9" 2.1" 124mm 150mm 53mm Q R Back Box Accessory 4.92 5.91 2.07S currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 9 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DIMENSIONS DATE:LOCATION: TYPE:PROJECT: CATALOG #: NXSP-14F NXSP-40F Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens Coverage and Detection PatternsWhen Mounted at 30ft and 45ft with Standard Lens 24' 48' 2.3” 1.3” 3.5” 2.3''58 mm 3.5''89 mm 1.3''33 mm 2.3” 1.3” 3.5” 2.3''58 mm 3.5''89 mm 1.3''33 mm 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0 '1 0'20'20' 60 ft 30'30'30' 0' 8' '7'3'3'07'11'11'24'24' SCP-8F A B 2.3"(59mm).8" (20mm) 60 ft 0' 0' 10' 10' 20' 20' 30' 30'10'10'20'30'20'30' 24' 11' 7' 3' 0' 3' 7' 11' 24' 0' 8' A B ADDITIONAL INFORMATION 2.33”59.2mm 0.78”19.7mm '3'0'3'6'9'21'9'6 12' 10' 20' 0' 15' Ceiling 5' '02'81'511 5'18'20'20'1 0'0'10'20' 0' 20' 10' 10' 20' 40 ft40 ft 0' 0' 10' 10' 20' 20'20' 15' 10' 5' 0' Ceiling 10'10'20'20'20' 18' 15' 12' 9' 6' 3' 0' 3' 6' 9' 12' 15' 18' 20' A B 2.3"(59mm).8" (20mm) A B SCP-2OF currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 10 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: • Low profile LED wall luminaire with a variety of IES distributions for lighting applications such as retail, commercial and industrial building mount • Featuring Strike and Micro Strike Optics which maximizes target zone illumination with minimal losses at the house-side, reducing light trespass issues • Visual comfort standard • Control options including photo control, occupancy sensing, NX Distributed Intelligence™, LightGRID+ and 7-Pin with networked controls • Battery Backup options available for emergency code compliance • Quick-mount adapter allows easy installation/maintenance • 347V and 480V versions for industrial applications and Canada DATE:LOCATION: TYPE:PROJECT: CONSTRUCTION • Die-cast housing with hidden vertical heat fins that are optimal for heat dissipation while keeping a clean smooth outer surface • Corrosion resistant, die-cast aluminum housing with powder coat paint finish • Powder paint finish provides durability in outdoor environments. Tested to meet 1000 hour salt spray rating OPTICS• Entire optical aperture illuminates to create a larger luminous surface area resulting in a low glare appearance without sacrificing optical performance • 48 or 160 midpower LEDs • 3000K, 4000K or 5000K (70 CRI/80 CRI) CCT • Zero uplight distributions • LED optics provide IES type II, III and IV distributions. Type II only available in RWL2 configurations INSTALLATION• Quick-mount adapter provides easy installation to wall or to recessed junction boxes (4" square junction box) • Designed for direct j-box mount. • Integral back box contains 1/2” conduit hubs • Integral backbox provided as standard with selection of some options ELECTRICAL• 120V-277V universal voltage 50/60Hz 0-10V dimming drivers • 347V and 480V dimmable driver option for all wattages above 35W • Ambient operating temperature -40˚C to 40˚C • Driver RoHS and IP66 CONTROLS (CONTINUED)• Dual Driver and Dual Power Feed options creates product configuration with 2 internal drivers for code compliance • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application. • LightGRID+ available with in fixture wireless control module, features dimming and occupancy sensor. Also available in 7-pin configuration CERTIFICATIONS • Certified to UL 1598 and CSA 22.2#250.0-24 for wet locations • IP65 rated housing • DLC® (DesignLights Consortium Qualified), with some Premium Qualified configurations. Not all product variations listed in this document are DLC® qualified. Refer to http://www.designlights.org for the most up-to-date list. • Emergency battery backup options are California Energy Commission (CEC) Title 20 Compliant • Meets IDA requirements using 3K CCT configuration at 0 degrees or tilt WARRANTY • 5 year limited warranty ELECTRICAL (CONTINUED) • 10kV Surge Protector optional • Drivers have greater than .90 power factor and less than 20% Total Harmonic Distortion • Dual Driver option provides 2 drivers within luminaire but only one set of leads exiting the luminaire, where Dual Power Feed provides two drivers which can be wired independently as two sets of leads are extended from the luminaire. Both options can not be included in one same fixture. • Dimming drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than 6” standard. CONTROLS• Photo control, occupancy sensor and wireless available for complete on/off and dimming control • Button photocontrol is suitable for 120-277V operation • 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately) • NX Distributed Intelligence™ available with in fixture wireless control module, features dimming and occupancy sensor LightGRID+ available with in fixture wireless control module, features dimming and occupancy sensor • Integral Battery Backup provides emergency lighting for the required 90 minute path of egress • Battery Backup suitable for operating temperatures -25˚C to 40˚C. RWL1 battery is 12.5W RWL2 battery is 18W CATALOG #: SERVICE PROGRAM 7 11 54 9.73 5.85 10.37 8.73 RWL1 15.37 16 5.54 15 3.88 12 5 RWL2 Weight RWL1 6.5 lbs / 2.95 kg RWL2 16.5 lbs / 7.48 kg 8.7" 9.7" 7.0" 3.9"5.0" 14.0" 15.0" 3.9" 12.0" 5.0" FEATURES SPECIFICATIONS CONTROL TECHNOLOGY currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 1 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK – Control Options Network Distribution NXW NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor 2, 7, 12 NXWS16F NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming 2, 7, 12 NXWS40F NX Networked Wireless Enabled Integral NXSMP2-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming 2, 7, 12 WIR LightGRID+ In-Fixture Module 2, 9 Stand Alone Sensors SCP-8F Remote control programmable line voltage sensor 4, 5, 6, 8 SCP-20F Remote control programmable line voltage sensor 4, 5, 6, 8 BTS-14F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 1, 2, 5, 7, 8 BTS-40F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 1, 2, 5, 7, 8 BTSO-12F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor, up to 12' mounting height 1, 2, 5, 7, 8 Control Options 7PR_7-Pin Receptacle 8, 9 F Fusing 4 E Emergency Battery Backup 3, 8, 9 EH Emergency Battery w/ Heater Option 3, 8, 9 2DR Dual Driver 3, 9, 10 2PF Dual Power Feed 3, 9, 10 PC Button Photocontrol 5, 6, 11 SP 10kA Surge Protector 11 DATE:LOCATION: TYPE:PROJECT: CATALOG #: Example: RWL1–48L-10–3K7–2–UNV–BLS–E CATALOG # Control Options Standalone SCPREMOTE Order at least one per project location to program and control Notes: 1 replace "xxx" with color option Catalog Number Description WP-BB-XXX Accessory for conduit entry 1 –––––– Series # LEDs - Wattage CCT/CRI Distribution Voltage Color RWL1 Micro Strike Optics RWL2 Micro Strike Optics RWL2 Strike Optics 48L-10 1,000 Lumens 48L-15 2,000 Lumens 48L-20 2,500 Lumens 5, 6 48L-25 3,500 Lumens 48L-35 4,500 Lumens 48L-45 5,500 Lumens 5, 6 160L-45 6,500 Lumens 160L-50 7,500 Lumens 160L-65 9,500 Lumens 160L-80 11,000 Lumens 160L-95 13,000 Lumens 160L-115 15,000 Lumens 160L-135 17,500 Lumens 160L-155 19,500 Lumens 36L-39 5,500 Lumens, Strike 36L-55 7,500 Lumens, Strike 36L-85 10,000 Lumens, Strike 36L-105 12,500 Lumens, Strike 36L-120 14,000 Lumens, Strike 3K7 3000K, 70 CRI 4K7 4000K, 70 CRI 5K7 5000K, 70 CRI 3K8 3000K, 80 CRI 4K8 4000K, 80 CRI 5K8 5000K, 80 CRI 2 IES TYPE II 3 IES TYPE III 4F IES TYPE IV Forward 4W IES TYPE IV Wide UNV 120-277V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Matte Textured PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color Notes: 1 Not available in RWL1 2 Cannot be combined with E, EH, 2DR, 2PF due to space constraints 3 Cannot be combined with Controls due to space constraints 4 Must specify voltage 5 Not available in 347V 6 Not available in 480V 7 Available in 480V in 95W, 115W, 155W only 8 Cannot be combined with 2DR or 2PF 9 Located in integral backbox which will be automatically added to the fixture if selected 10 Not available in RWL1-48L in 10W, 15W, or 20W 11 SP and PC cannot be combined due to space constraints 12 SP and PC cannot be combined due to space constraints *Based on space limitations, some options may not be combined. Consult Factory. = Service ProgramLimit of 15 luminairesGray Shading ORDERING GUIDE CONTROLS ACCESSORIES AND REPLACEMENT PARTS - MADE TO ORDER currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 2 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: OUTDOOR LIGHTING CONTROLS OPTIONS Control Option Ordering Logic & Description Control Option Functionality Control Option ComponentsNetworkableGroupingSchedulingOccupancy/ Motion Daylight Harvesting 0-10V Dimming On/Off Control Bluetooth App Programming Sensor Height NX WirelessLightGRID+IndependentCONTROLS FUNCTIONALITY WIR LightGRID+ In-Fixture Module ✓-✓--✓✓Gateway -WIR NXW NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor ✓✓✓--✓✓✓-NXRM2-H NXWS16F NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming ✓✓✓✓✓✓✓✓16ft NXSMP2-LMO NXWS40F NX Networked Wireless Enabled Integral NXSMP2-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming ✓✓✓✓✓✓✓✓40ft NXSMP2-HMO BTSO-12F Bluetooth® Programmable, BTSMP-OMNI-O PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓12ft BTSMP-OMNI-O BTS-14F Bluetooth® Programmable, BTSMP-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓14ft BTSMP-LMO BTS-40F Bluetooth® Programmable, BTSMP-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓40ft BTSMP-HMO CONTROLS TECH SUPPORT 800-888-8006 (7:00 AM - 7:00 PM)NX LIGHTING CONTROLS FREE APP The NX Lighting Controls App is free to use mobile application for programming both NX Lighting Controls System or Standalone Bluetooth Sensors. The mobile app allows you to configure devices, discover and setup wireless enable luminiares and program NX system settings. Apple App: https://apps.apple.com/us/app/nx-lighting-controls/id962112904 Google Play: https://play.google.com/store/apps/details?id=io.cordova.NXBTR&hl=en_US&gl=US Apple App Google Play Occupancy Sensor Enabled Occupancy Sensor Sensitivity 7 Occupancy Sensor Timeout 15 Minutes Occupied Dim Level 100% Unoccupied Dim Level 0% Daylight Sensor Disabled Bluetooth Enabled 2.4GHz Wireless Mesh On "Passcode Factory Passcode: HubbN3T!"Enabled Occupancy Sensor Enabled Occupancy Sensor Sensitivity 7 Occupancy Sensor Timeout 8 Minutes Occupied Dim Level 100% Unoccupied Dim Level 50% Daylight Sensor Disabled DEFAULT SETTINGS NX WirelessStand AloneSensor Lens Coverage and Detection PatternsWhen Mounted at 40ft and 45ft with Standard Lens NXSMP2-HMO 45' Indoor Mounting Height30' Outdoor Mounting Height 56' at 40' Mounting Height 63' at 45' Mounting Height 40' Outdoor Mounting Height45' Intdoor Mounting HeightSensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens NXSMP2-LMO 24' 48' 0 824 241818121288404 Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens NXSMP2-LMO 24' 48' 0 824 241818121288404 Minor Motion Major Motion NXSMP2-OMNI 12' (3.7m) 22' (6.7m) Minor Motion Major Motion NXSMP2-OMNI 12' (3.7m) 22' (6.7m) NX WIRELESS COVERAGE PATTERNS currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 3 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK Control Option Ordering Logic & Description Control Option Functionality Control Option ComponentsNetworkableGroupingSchedulingOccupancy/ Motion Daylight Harvesting 0-10V Dimming On/Off Control Bluetooth App Programming Sensor Height IndependentDATE:LOCATION: TYPE:PROJECT: CATALOG #: SCP_F Sensor Control Programmable, sensor range, reference product specification for height selections ---✓✓✓✓-8ft or 40ft SCP_F 7PR 7-Pin Receptacle --Paired with external control -Paired with external control -Paired with external control --7PR OUTDOOR LIGHTING CONTROLS OPTIONS CONTROLS FUNCTIONALITY COVERAGE PATTERNS FOR SCP_F Lens Coverage GuideNo: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China SPECIFICATIONS Operating Temperature- ....................40° to 167°F (-40° to 75°C IP Rating when mounted to outdoor rated fixture ................IP-66 DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View 800.879.8585www.legrand.us/wattstopper No. 24226 – 08/16 rev. 1 © Copyright 2016 Legrand All Rights Reserved.© Copyright 2016 Tous droits réservés Legrand.© Copyright 2016 Legrand Todos los derechos reservados. Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation. Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper ne peut être tenu responsable de tout dommage consécutif causé par ou lié à l’utilisation ou à la performance de ce produit ou tout autre dommage indirect lié à la perte de propriété, de revenus, ou de profits, ou aux coûts d’enlèvement, d’installation ou de réinstallation. Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No existen obligaciones ni responsabilidades por parte de Wattstopper por daños consecuentes que se deriven o estén relacionados con el uso o el rendimiento de este producto u otros daños indirectos con respecto a la pérdida de propiedad, renta o ganancias, o al costo de extracción, instalación o reinstalación. WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA 3.2"81.3mm 1.04"26.4mm FSP‑L7: 360° Coverage The FSP-L7 has a lens that covers a 100' diameter area at a height of 40'. 0'10'10'20'20'30'30'40'40' 0' 27' 40'50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View Lens Coverage GuideNo: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China SPECIFICATIONS Operating Temperature- ....................40° to 167°F (-40° to 75°C IP Rating when mounted to outdoor rated fixture ................IP-66 DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View anties its products to be free erials and workmanship for a ears. There are no obligations Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No ANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA "mm 1.04"26.4mm Coverage s a lens that covers a 100' diameter area at 0'10'10'20'20'30'30'40'40' 0' 27' 40' 50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' 800.879.8585 www.legrand.us/wattstopper No. 24226 – 08/16 rev. 1 © Copyright 2016 Legrand All Rights Reserved.© Copyright 2016 Tous droits réservés Legrand.© Copyright 2016 Legrand Todos los derechos reservados. Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation. Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper ne peut être tenu responsable de tout dommage consécutif causé par ou lié à l’utilisation ou à la performance de ce produit ou tout autre dommage indirect lié à la perte de propriété, de revenus, ou de profits, ou aux coûts d’enlèvement, d’installation ou de réinstallation. Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No existen obligaciones ni responsabilidades por parte de Wattstopper por daños consecuentes que se deriven o estén relacionados con el uso o el rendimiento de este producto u otros daños indirectos con respecto a la pérdida de propiedad, renta o ganancias, o al costo de extracción, instalación o reinstalación. WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA 3.2"81.3mm 1.04"26.4mm FSP‑L7: 360° Coverage The FSP-L7 has a lens that covers a 100' diameter area at a height of 40'. 0'10'10'20'20'30'30'40'40' 0' 27' 40'50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 4 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: Description Nominal Wattage System Watts Dist. Type 5K (5000K NOMINAL 70 CRI)4K (4000K NOMINAL 70 CRI)3K (3000K NOMINAL 70 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G RWL1 10 10.1 3 1362 135 0 0 1 1355 134 0 0 1 1303 129 0 0 1 4W 1343 133 0 0 1 1336 132 0 0 1 1285 127 0 0 1 15 14.5 3 1972 136 1 0 1 1962 135 1 0 1 1887 130 1 0 1 4W 1945 134 0 0 1 1935 133 0 0 1 1861 128 0 0 1 20 19.9 3 2722 137 1 0 1 2709 136 1 0 1 2605 131 1 0 1 4W 2685 135 1 0 1 2672 134 1 0 1 2569 129 1 0 1 25 28.0 3 3749 134 1 0 1 3732 133 1 0 1 3588 128 1 0 1 4W 3698 132 1 0 1 3680 131 1 0 1 3538 126 1 0 1 35 36.9 3 4751 129 1 0 2 4728 128 1 0 2 4546 123 1 0 1 4W 4685 127 1 0 2 4663 126 1 0 2 4483 121 1 0 2 45 46.5 3 5812 125 1 0 2 5784 124 1 0 2 5562 120 1 0 2 4W 5731 123 1 0 2 5704 123 1 0 2 5485 118 1 0 2 RWL2 45 46.1 2 6701 145 1 0 2 6668 145 1 0 2 6412 139 1 0 2 3 6812 148 1 0 2 6780 147 1 0 2 6519 141 1 0 2 4W 6678 145 1 0 2 6646 144 1 0 2 6390 139 1 0 2 50 54.0 2 7747 143 1 0 2 7710 143 1 0 2 7413 137 1 0 2 3 7876 146 1 0 2 7838 145 1 0 2 7537 140 1 0 2 4W 7720 143 1 0 2 7683 142 1 0 2 7388 137 1 0 2 65 67.2 2 9539 142 1 0 2 9494 141 1 0 2 9129 136 1 0 2 3 9699 144 2 0 2 9652 144 2 0 2 9281 138 2 0 2 4W 9507 141 2 0 2 9461 141 2 0 2 9097 135 2 0 2 80 80.8 2 11228 139 2 0 2 11174 138 2 0 2 10745 133 2 0 2 3 11416 141 2 0 2 11361 141 2 0 2 10924 135 2 0 2 4W 11190 138 2 0 2 11136 138 2 0 2 10708 133 2 0 2 95 93.2 2 13148 141 2 0 2 13085 140 2 0 2 12582 135 2 0 2 3 13368 143 2 0 2 13304 143 2 0 2 12792 137 2 0 2 4W 13103 141 2 0 2 13040 140 2 0 2 12539 135 2 0 2 115 109.8 2 15102 138 2 0 3 15030 137 2 0 3 14452 132 2 0 3 3 15354 140 2 0 3 15281 139 2 0 3 14693 134 2 0 3 4W 15050 137 2 0 3 14978 136 2 0 3 14402 131 2 0 3 135 137.1 2 17533 128 2 0 3 17449 127 2 0 3 16778 122 2 0 3 3 17826 130 2 0 3 17740 129 2 0 3 17058 124 2 0 3 4W 17473 127 2 0 3 17389 127 2 0 3 16720 122 2 0 3 155 156.8 2 19495 124 2 0 3 19402 124 2 0 3 18656 119 2 0 3 3 19821 126 2 0 3 19726 126 2 0 3 18967 121 2 0 3 4W 19542 125 2 0 3 19448 124 2 0 3 18700 119 2 0 3 PERFORMANCE DATA: MICROSTRIKE currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 5 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: PERFORMANCE DATA: STRIKE Description Nominal Wattage System Watts Dist. Type 5K (5000K NOMINAL 70 CRI)4K (4000K NOMINAL 70 CRI)3K (3000K NOMINAL 70 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G RWL2 39 45.1 2 5618 125 1 0 1 5723 127 1 0 1 5251 116 1 0 1 3 5644 125 1 0 2 5749 127 1 0 2 5274 117 1 0 2 4F 5662 126 1 0 2 5768 128 1 0 2 5291 117 1 0 2 4W 5652 125 1 0 2 5757 128 1 0 2 5282 117 1 0 2 55 63.1 2 7458 118 1 0 2 7659 121 1 0 2 6970 110 1 0 2 3 7552 120 1 0 2 7694 122 1 0 2 7058 112 1 0 2 4F 7577 120 1 0 2 7718 122 1 0 2 7081 112 1 0 2 4W 7564 120 1 0 3 7705 122 1 0 3 7069 112 1 0 3 85 88.0 2 10121 115 2 0 2 10311 117 2 0 2 9459 107 2 0 2 3 10167 116 1 0 3 10357 118 1 0 3 9502 108 1 0 3 4F 10200 116 1 0 2 10390 118 1 0 2 9532 108 1 0 2 4W 10182 116 1 0 3 10372 118 1 0 3 9516 108 1 0 3 105 111.7 2 12022 108 2 0 2 12247 110 2 0 2 11235 101 2 0 2 3 12075 108 2 0 3 12301 110 2 0 3 11285 101 2 0 3 4F 12115 108 1 0 3 12341 110 1 0 3 11322 101 1 0 2 4W 12093 108 2 0 3 12319 110 2 0 3 11302 101 1 0 3 120 126.2 2 12889 102 2 0 2 13130 104 2 0 2 12046 95 2 0 2 3 12947 103 2 0 3 13189 105 2 0 3 12100 96 2 0 3 4F 12989 103 1 0 3 13232 105 1 0 3 12139 96 1 0 3 4W 12966 103 2 0 3 13208 105 2 0 3 12118 96 1 0 3 currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 6 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL1 10 120 0.08 10.1 208 0.05 240 0.042770.043470.034800.02 15 120 0.12 14.5 208 0.072400.06 277 0.053470.04 480 0.03 20 120 0.17 19.9 208 0.102400.08 277 0.073470.06 480 0.04 25 120 0.23 28.0 208 0.132400.12 277 0.103470.08 480 0.06 35 120 0.31 36.9 208 0.182400.15 277 0.133470.114800.08 45 120 0.39 46.5 208 0.22 240 0.192770.17 347 0.134800.10 # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL2 45 120 0.38 46.1 208 0.22 240 0.192770.173470.134800.10 50 120 0.45 54.0 208 0.262400.23 277 0.193470.16 480 0.11 65 120 0.56 67.2 208 0.322400.28 277 0.243470.19 480 0.14 80 120 0.67 80.8 208 0.392400.34 277 0.293470.23 480 0.17 95 120 0.78 93.2 208 0.452400.39 277 0.343470.274800.19 115 120 0.92 109.8 208 0.53 240 0.462770.40 347 0.324800.23 135 120 1.14 137.1 208 0.66 240 0.572770.49 347 0.404800.29 155 120 1.31 156.8 208 0.75 240 0.652770.57 347 0.454800.33 Ambient Temperature Lumen Multiplier 0°C 32°F 1.03 10°C 50°F 1.01 20°C 68°F 1.00 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 50°C 122°F 0.97 LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) PROJECTED LUMEN MAINTENANCE MULTIPLIER ELECTRICAL DATA: MICROSTRIKE Micro Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.841 – 3000K 0.977 0.861 0.647 3500K –0.900 – 4000K 1 0.926 0.699 5000K 1 0.937 0.791 OPERATING HOURS Ambient Temp.0 25,000 TM-21-22 60,000 25°C / 77°F 1.00 0.91 0.83 40°C / 104°F 0.99 0.90 0.82 Lumen maintenance values calculated per TM-21 using six times the LM-80 test time for the LED and in-situ thermal testing of the luminaire. Strike Lumen Multiplier CCT 70CRI 80CRI 90CRI 2700K 0.900 0.810 0.62 3000K 0.933 0.853 0.659 3500K 0.959 0.894 0.711 4000K 1.000 0.900 0.732 5000K 1.000 0.900 0.732 Monochromatic Amber Multiplier Amber See Amber Spec Sheet currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 7 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: ELECTRICAL DATA: STRIKE # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL2 39 120 0.38 45.1 208 0.222400.19 277 0.163470.13 480 0.09 55 120 0.53 63.1 208 0.302400.262770.233470.184800.13 85 120 0.73 88.0 208 0.422400.372770.32 347 0.254800.18 105 120 0.93 111.7 208 0.54 240 0.472770.40 347 0.324800.23 120 120 1.05 126.2 208 0.61 240 0.532770.46 347 0.364800.26 Type 2 Mounting Height: 30ft Type 3 Type 4WType 4F PHOTOMETRY currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 8 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: A B C D E 8.7" 9.7" 3.9" 7.0" 5.0" 221mm 246mm 99mm 178mm 127mm F G H 10.4" 11.0" 5.9" 264mm 279mm 150mm Weight 6.5 lbs (2.95 kgs) 7 54 9.73 8.73 7 11 5 4 9.73 5.85 10.37 8.73 A F G H C B D E RWL1 RWL1 with Integral Back Box N O P 15.4" 16.0" 5.5" 391mm 406mm 140mm I J K L M 14.0" 15.0" 3.9" 12.0" 5.0" 356mm 381mm 99mm 305mm 127mm Weight 16.5 lbs (7.48 kgs) 15.37 16 5.54 15 3.88 12 5 15.37 16 5.54 N O I J K P L M RWL2 RWL2 with Integral Back Box 4.92 5.91 2.07 Q R S 4.9" 5.9" 2.1" 124mm 150mm 53mm Q R Back Box Accessory 4.92 5.91 2.07S currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 9 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DIMENSIONS DATE:LOCATION: TYPE:PROJECT: CATALOG #: NXSP-14F NXSP-40F Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens Coverage and Detection PatternsWhen Mounted at 30ft and 45ft with Standard Lens 24' 48' 2.3” 1.3” 3.5” 2.3''58 mm 3.5''89 mm 1.3''33 mm 2.3” 1.3” 3.5” 2.3''58 mm 3.5''89 mm 1.3''33 mm 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0 '1 0'20'20' 60 ft 30'30'30' 0' 8' '7'3'3'07'11'11'24'24' SCP-8F A B 2.3"(59mm).8" (20mm) 60 ft 0' 0' 10' 10' 20' 20' 30' 30'10'10'20'30'20'30' 24' 11' 7' 3' 0' 3' 7' 11' 24' 0' 8' A B ADDITIONAL INFORMATION 2.33”59.2mm 0.78”19.7mm '3'0'3'6'9'21'9'6 12' 10' 20' 0' 15' Ceiling 5' '02'81'511 5'18'20'20'1 0'0'10'20' 0' 20' 10' 10' 20' 40 ft40 ft 0' 0' 10' 10' 20' 20'20' 15' 10' 5' 0' Ceiling 10'10'20'20'20' 18' 15' 12' 9' 6' 3' 0' 3' 6' 9' 12' 15' 18' 20' A B 2.3"(59mm).8" (20mm) A B SCP-2OF currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 10 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: • Low profile LED wall luminaire with a variety of IES distributions for lighting applications such as retail, commercial and industrial building mount • Featuring Strike and Micro Strike Optics which maximizes target zone illumination with minimal losses at the house-side, reducing light trespass issues • Visual comfort standard • Control options including photo control, occupancy sensing, NX Distributed Intelligence™, LightGRID+ and 7-Pin with networked controls • Battery Backup options available for emergency code compliance • Quick-mount adapter allows easy installation/maintenance • 347V and 480V versions for industrial applications and Canada DATE:LOCATION: TYPE:PROJECT: CONSTRUCTION • Die-cast housing with hidden vertical heat fins that are optimal for heat dissipation while keeping a clean smooth outer surface • Corrosion resistant, die-cast aluminum housing with powder coat paint finish • Powder paint finish provides durability in outdoor environments. Tested to meet 1000 hour salt spray rating OPTICS• Entire optical aperture illuminates to create a larger luminous surface area resulting in a low glare appearance without sacrificing optical performance • 48 or 160 midpower LEDs • 3000K, 4000K or 5000K (70 CRI/80 CRI) CCT • Zero uplight distributions • LED optics provide IES type II, III and IV distributions. Type II only available in RWL2 configurations INSTALLATION• Quick-mount adapter provides easy installation to wall or to recessed junction boxes (4" square junction box) • Designed for direct j-box mount. • Integral back box contains 1/2” conduit hubs • Integral backbox provided as standard with selection of some options ELECTRICAL• 120V-277V universal voltage 50/60Hz 0-10V dimming drivers • 347V and 480V dimmable driver option for all wattages above 35W • Ambient operating temperature -40˚C to 40˚C • Driver RoHS and IP66 CONTROLS (CONTINUED)• Dual Driver and Dual Power Feed options creates product configuration with 2 internal drivers for code compliance • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application. • LightGRID+ available with in fixture wireless control module, features dimming and occupancy sensor. Also available in 7-pin configuration CERTIFICATIONS • Certified to UL 1598 and CSA 22.2#250.0-24 for wet locations • IP65 rated housing • DLC® (DesignLights Consortium Qualified), with some Premium Qualified configurations. Not all product variations listed in this document are DLC® qualified. Refer to http://www.designlights.org for the most up-to-date list. • Emergency battery backup options are California Energy Commission (CEC) Title 20 Compliant • Meets IDA requirements using 3K CCT configuration at 0 degrees or tilt WARRANTY • 5 year limited warranty ELECTRICAL (CONTINUED) • 10kV Surge Protector optional • Drivers have greater than .90 power factor and less than 20% Total Harmonic Distortion • Dual Driver option provides 2 drivers within luminaire but only one set of leads exiting the luminaire, where Dual Power Feed provides two drivers which can be wired independently as two sets of leads are extended from the luminaire. Both options can not be included in one same fixture. • Dimming drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than 6” standard. CONTROLS• Photo control, occupancy sensor and wireless available for complete on/off and dimming control • Button photocontrol is suitable for 120-277V operation • 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately) • NX Distributed Intelligence™ available with in fixture wireless control module, features dimming and occupancy sensor LightGRID+ available with in fixture wireless control module, features dimming and occupancy sensor • Integral Battery Backup provides emergency lighting for the required 90 minute path of egress • Battery Backup suitable for operating temperatures -25˚C to 40˚C. RWL1 battery is 12.5W RWL2 battery is 18W CATALOG #: SERVICE PROGRAM 7 11 54 9.73 5.85 10.37 8.73 RWL1 15.37 16 5.54 15 3.88 12 5 RWL2 Weight RWL1 6.5 lbs / 2.95 kg RWL2 16.5 lbs / 7.48 kg 8.7" 9.7" 7.0" 3.9"5.0" 14.0" 15.0" 3.9" 12.0" 5.0" FEATURES SPECIFICATIONS CONTROL TECHNOLOGY currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 1 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK – Control Options Network Distribution NXW NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor 2, 7, 12 NXWS16F NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming 2, 7, 12 NXWS40F NX Networked Wireless Enabled Integral NXSMP2-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming 2, 7, 12 WIR LightGRID+ In-Fixture Module 2, 9 Stand Alone Sensors SCP-8F Remote control programmable line voltage sensor 4, 5, 6, 8 SCP-20F Remote control programmable line voltage sensor 4, 5, 6, 8 BTS-14F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 1, 2, 5, 7, 8 BTS-40F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 1, 2, 5, 7, 8 BTSO-12F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor, up to 12' mounting height 1, 2, 5, 7, 8 Control Options 7PR_7-Pin Receptacle 8, 9 F Fusing 4 E Emergency Battery Backup 3, 8, 9 EH Emergency Battery w/ Heater Option 3, 8, 9 2DR Dual Driver 3, 9, 10 2PF Dual Power Feed 3, 9, 10 PC Button Photocontrol 5, 6, 11 SP 10kA Surge Protector 11 DATE:LOCATION: TYPE:PROJECT: CATALOG #: Example: RWL1–48L-10–3K7–2–UNV–BLS–E CATALOG # Control Options Standalone SCPREMOTE Order at least one per project location to program and control Notes: 1 replace "xxx" with color option Catalog Number Description WP-BB-XXX Accessory for conduit entry 1 –––––– Series # LEDs - Wattage CCT/CRI Distribution Voltage Color RWL1 Micro Strike Optics RWL2 Micro Strike Optics RWL2 Strike Optics 48L-10 1,000 Lumens 48L-15 2,000 Lumens 48L-20 2,500 Lumens 5, 6 48L-25 3,500 Lumens 48L-35 4,500 Lumens 48L-45 5,500 Lumens 5, 6 160L-45 6,500 Lumens 160L-50 7,500 Lumens 160L-65 9,500 Lumens 160L-80 11,000 Lumens 160L-95 13,000 Lumens 160L-115 15,000 Lumens 160L-135 17,500 Lumens 160L-155 19,500 Lumens 36L-39 5,500 Lumens, Strike 36L-55 7,500 Lumens, Strike 36L-85 10,000 Lumens, Strike 36L-105 12,500 Lumens, Strike 36L-120 14,000 Lumens, Strike 3K7 3000K, 70 CRI 4K7 4000K, 70 CRI 5K7 5000K, 70 CRI 3K8 3000K, 80 CRI 4K8 4000K, 80 CRI 5K8 5000K, 80 CRI 2 IES TYPE II 3 IES TYPE III 4F IES TYPE IV Forward 4W IES TYPE IV Wide UNV 120-277V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Matte Textured PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color Notes: 1 Not available in RWL1 2 Cannot be combined with E, EH, 2DR, 2PF due to space constraints 3 Cannot be combined with Controls due to space constraints 4 Must specify voltage 5 Not available in 347V 6 Not available in 480V 7 Available in 480V in 95W, 115W, 155W only 8 Cannot be combined with 2DR or 2PF 9 Located in integral backbox which will be automatically added to the fixture if selected 10 Not available in RWL1-48L in 10W, 15W, or 20W 11 SP and PC cannot be combined due to space constraints 12 SP and PC cannot be combined due to space constraints *Based on space limitations, some options may not be combined. Consult Factory. = Service ProgramLimit of 15 luminairesGray Shading ORDERING GUIDE CONTROLS ACCESSORIES AND REPLACEMENT PARTS - MADE TO ORDER currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 2 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: OUTDOOR LIGHTING CONTROLS OPTIONS Control Option Ordering Logic & Description Control Option Functionality Control Option ComponentsNetworkableGroupingSchedulingOccupancy/ Motion Daylight Harvesting 0-10V Dimming On/Off Control Bluetooth App Programming Sensor Height NX WirelessLightGRID+IndependentCONTROLS FUNCTIONALITY WIR LightGRID+ In-Fixture Module ✓-✓--✓✓Gateway -WIR NXW NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor ✓✓✓--✓✓✓-NXRM2-H NXWS16F NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming ✓✓✓✓✓✓✓✓16ft NXSMP2-LMO NXWS40F NX Networked Wireless Enabled Integral NXSMP2-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming ✓✓✓✓✓✓✓✓40ft NXSMP2-HMO BTSO-12F Bluetooth® Programmable, BTSMP-OMNI-O PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓12ft BTSMP-OMNI-O BTS-14F Bluetooth® Programmable, BTSMP-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓14ft BTSMP-LMO BTS-40F Bluetooth® Programmable, BTSMP-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓40ft BTSMP-HMO CONTROLS TECH SUPPORT 800-888-8006 (7:00 AM - 7:00 PM)NX LIGHTING CONTROLS FREE APP The NX Lighting Controls App is free to use mobile application for programming both NX Lighting Controls System or Standalone Bluetooth Sensors. The mobile app allows you to configure devices, discover and setup wireless enable luminiares and program NX system settings. Apple App: https://apps.apple.com/us/app/nx-lighting-controls/id962112904 Google Play: https://play.google.com/store/apps/details?id=io.cordova.NXBTR&hl=en_US&gl=US Apple App Google Play Occupancy Sensor Enabled Occupancy Sensor Sensitivity 7 Occupancy Sensor Timeout 15 Minutes Occupied Dim Level 100% Unoccupied Dim Level 0% Daylight Sensor Disabled Bluetooth Enabled 2.4GHz Wireless Mesh On "Passcode Factory Passcode: HubbN3T!"Enabled Occupancy Sensor Enabled Occupancy Sensor Sensitivity 7 Occupancy Sensor Timeout 8 Minutes Occupied Dim Level 100% Unoccupied Dim Level 50% Daylight Sensor Disabled DEFAULT SETTINGS NX WirelessStand AloneSensor Lens Coverage and Detection PatternsWhen Mounted at 40ft and 45ft with Standard Lens NXSMP2-HMO 45' Indoor Mounting Height30' Outdoor Mounting Height 56' at 40' Mounting Height 63' at 45' Mounting Height 40' Outdoor Mounting Height45' Intdoor Mounting HeightSensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens NXSMP2-LMO 24' 48' 0 824 241818121288404 Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens NXSMP2-LMO 24' 48' 0 824 241818121288404 Minor Motion Major Motion NXSMP2-OMNI 12' (3.7m) 22' (6.7m) Minor Motion Major Motion NXSMP2-OMNI 12' (3.7m) 22' (6.7m) NX WIRELESS COVERAGE PATTERNS currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 3 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK Control Option Ordering Logic & Description Control Option Functionality Control Option ComponentsNetworkableGroupingSchedulingOccupancy/ Motion Daylight Harvesting 0-10V Dimming On/Off Control Bluetooth App Programming Sensor Height IndependentDATE:LOCATION: TYPE:PROJECT: CATALOG #: SCP_F Sensor Control Programmable, sensor range, reference product specification for height selections ---✓✓✓✓-8ft or 40ft SCP_F 7PR 7-Pin Receptacle --Paired with external control -Paired with external control -Paired with external control --7PR OUTDOOR LIGHTING CONTROLS OPTIONS CONTROLS FUNCTIONALITY COVERAGE PATTERNS FOR SCP_F Lens Coverage GuideNo: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China SPECIFICATIONS Operating Temperature- ....................40° to 167°F (-40° to 75°C IP Rating when mounted to outdoor rated fixture ................IP-66 DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View 800.879.8585www.legrand.us/wattstopper No. 24226 – 08/16 rev. 1 © Copyright 2016 Legrand All Rights Reserved.© Copyright 2016 Tous droits réservés Legrand.© Copyright 2016 Legrand Todos los derechos reservados. Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation. Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper ne peut être tenu responsable de tout dommage consécutif causé par ou lié à l’utilisation ou à la performance de ce produit ou tout autre dommage indirect lié à la perte de propriété, de revenus, ou de profits, ou aux coûts d’enlèvement, d’installation ou de réinstallation. Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No existen obligaciones ni responsabilidades por parte de Wattstopper por daños consecuentes que se deriven o estén relacionados con el uso o el rendimiento de este producto u otros daños indirectos con respecto a la pérdida de propiedad, renta o ganancias, o al costo de extracción, instalación o reinstalación. WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA 3.2"81.3mm 1.04"26.4mm FSP‑L7: 360° Coverage The FSP-L7 has a lens that covers a 100' diameter area at a height of 40'. 0'10'10'20'20'30'30'40'40' 0' 27' 40'50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View Lens Coverage GuideNo: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China SPECIFICATIONS Operating Temperature- ....................40° to 167°F (-40° to 75°C IP Rating when mounted to outdoor rated fixture ................IP-66 DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View anties its products to be free erials and workmanship for a ears. There are no obligations Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No ANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA "mm 1.04"26.4mm Coverage s a lens that covers a 100' diameter area at 0'10'10'20'20'30'30'40'40' 0' 27' 40' 50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' 800.879.8585 www.legrand.us/wattstopper No. 24226 – 08/16 rev. 1 © Copyright 2016 Legrand All Rights Reserved.© Copyright 2016 Tous droits réservés Legrand.© Copyright 2016 Legrand Todos los derechos reservados. Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation. Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper ne peut être tenu responsable de tout dommage consécutif causé par ou lié à l’utilisation ou à la performance de ce produit ou tout autre dommage indirect lié à la perte de propriété, de revenus, ou de profits, ou aux coûts d’enlèvement, d’installation ou de réinstallation. Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No existen obligaciones ni responsabilidades por parte de Wattstopper por daños consecuentes que se deriven o estén relacionados con el uso o el rendimiento de este producto u otros daños indirectos con respecto a la pérdida de propiedad, renta o ganancias, o al costo de extracción, instalación o reinstalación. WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA 3.2"81.3mm 1.04"26.4mm FSP‑L7: 360° Coverage The FSP-L7 has a lens that covers a 100' diameter area at a height of 40'. 0'10'10'20'20'30'30'40'40' 0' 27' 40'50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 4 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: Description Nominal Wattage System Watts Dist. Type 5K (5000K NOMINAL 70 CRI)4K (4000K NOMINAL 70 CRI)3K (3000K NOMINAL 70 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G RWL1 10 10.1 3 1362 135 0 0 1 1355 134 0 0 1 1303 129 0 0 1 4W 1343 133 0 0 1 1336 132 0 0 1 1285 127 0 0 1 15 14.5 3 1972 136 1 0 1 1962 135 1 0 1 1887 130 1 0 1 4W 1945 134 0 0 1 1935 133 0 0 1 1861 128 0 0 1 20 19.9 3 2722 137 1 0 1 2709 136 1 0 1 2605 131 1 0 1 4W 2685 135 1 0 1 2672 134 1 0 1 2569 129 1 0 1 25 28.0 3 3749 134 1 0 1 3732 133 1 0 1 3588 128 1 0 1 4W 3698 132 1 0 1 3680 131 1 0 1 3538 126 1 0 1 35 36.9 3 4751 129 1 0 2 4728 128 1 0 2 4546 123 1 0 1 4W 4685 127 1 0 2 4663 126 1 0 2 4483 121 1 0 2 45 46.5 3 5812 125 1 0 2 5784 124 1 0 2 5562 120 1 0 2 4W 5731 123 1 0 2 5704 123 1 0 2 5485 118 1 0 2 RWL2 45 46.1 2 6701 145 1 0 2 6668 145 1 0 2 6412 139 1 0 2 3 6812 148 1 0 2 6780 147 1 0 2 6519 141 1 0 2 4W 6678 145 1 0 2 6646 144 1 0 2 6390 139 1 0 2 50 54.0 2 7747 143 1 0 2 7710 143 1 0 2 7413 137 1 0 2 3 7876 146 1 0 2 7838 145 1 0 2 7537 140 1 0 2 4W 7720 143 1 0 2 7683 142 1 0 2 7388 137 1 0 2 65 67.2 2 9539 142 1 0 2 9494 141 1 0 2 9129 136 1 0 2 3 9699 144 2 0 2 9652 144 2 0 2 9281 138 2 0 2 4W 9507 141 2 0 2 9461 141 2 0 2 9097 135 2 0 2 80 80.8 2 11228 139 2 0 2 11174 138 2 0 2 10745 133 2 0 2 3 11416 141 2 0 2 11361 141 2 0 2 10924 135 2 0 2 4W 11190 138 2 0 2 11136 138 2 0 2 10708 133 2 0 2 95 93.2 2 13148 141 2 0 2 13085 140 2 0 2 12582 135 2 0 2 3 13368 143 2 0 2 13304 143 2 0 2 12792 137 2 0 2 4W 13103 141 2 0 2 13040 140 2 0 2 12539 135 2 0 2 115 109.8 2 15102 138 2 0 3 15030 137 2 0 3 14452 132 2 0 3 3 15354 140 2 0 3 15281 139 2 0 3 14693 134 2 0 3 4W 15050 137 2 0 3 14978 136 2 0 3 14402 131 2 0 3 135 137.1 2 17533 128 2 0 3 17449 127 2 0 3 16778 122 2 0 3 3 17826 130 2 0 3 17740 129 2 0 3 17058 124 2 0 3 4W 17473 127 2 0 3 17389 127 2 0 3 16720 122 2 0 3 155 156.8 2 19495 124 2 0 3 19402 124 2 0 3 18656 119 2 0 3 3 19821 126 2 0 3 19726 126 2 0 3 18967 121 2 0 3 4W 19542 125 2 0 3 19448 124 2 0 3 18700 119 2 0 3 PERFORMANCE DATA: MICROSTRIKE currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 5 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: PERFORMANCE DATA: STRIKE Description Nominal Wattage System Watts Dist. Type 5K (5000K NOMINAL 70 CRI)4K (4000K NOMINAL 70 CRI)3K (3000K NOMINAL 70 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G RWL2 39 45.1 2 5618 125 1 0 1 5723 127 1 0 1 5251 116 1 0 1 3 5644 125 1 0 2 5749 127 1 0 2 5274 117 1 0 2 4F 5662 126 1 0 2 5768 128 1 0 2 5291 117 1 0 2 4W 5652 125 1 0 2 5757 128 1 0 2 5282 117 1 0 2 55 63.1 2 7458 118 1 0 2 7659 121 1 0 2 6970 110 1 0 2 3 7552 120 1 0 2 7694 122 1 0 2 7058 112 1 0 2 4F 7577 120 1 0 2 7718 122 1 0 2 7081 112 1 0 2 4W 7564 120 1 0 3 7705 122 1 0 3 7069 112 1 0 3 85 88.0 2 10121 115 2 0 2 10311 117 2 0 2 9459 107 2 0 2 3 10167 116 1 0 3 10357 118 1 0 3 9502 108 1 0 3 4F 10200 116 1 0 2 10390 118 1 0 2 9532 108 1 0 2 4W 10182 116 1 0 3 10372 118 1 0 3 9516 108 1 0 3 105 111.7 2 12022 108 2 0 2 12247 110 2 0 2 11235 101 2 0 2 3 12075 108 2 0 3 12301 110 2 0 3 11285 101 2 0 3 4F 12115 108 1 0 3 12341 110 1 0 3 11322 101 1 0 2 4W 12093 108 2 0 3 12319 110 2 0 3 11302 101 1 0 3 120 126.2 2 12889 102 2 0 2 13130 104 2 0 2 12046 95 2 0 2 3 12947 103 2 0 3 13189 105 2 0 3 12100 96 2 0 3 4F 12989 103 1 0 3 13232 105 1 0 3 12139 96 1 0 3 4W 12966 103 2 0 3 13208 105 2 0 3 12118 96 1 0 3 currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 6 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL1 10 120 0.08 10.1 208 0.05 240 0.042770.043470.034800.02 15 120 0.12 14.5 208 0.072400.06 277 0.053470.04 480 0.03 20 120 0.17 19.9 208 0.102400.08 277 0.073470.06 480 0.04 25 120 0.23 28.0 208 0.132400.12 277 0.103470.08 480 0.06 35 120 0.31 36.9 208 0.182400.15 277 0.133470.114800.08 45 120 0.39 46.5 208 0.22 240 0.192770.17 347 0.134800.10 # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL2 45 120 0.38 46.1 208 0.22 240 0.192770.173470.134800.10 50 120 0.45 54.0 208 0.262400.23 277 0.193470.16 480 0.11 65 120 0.56 67.2 208 0.322400.28 277 0.243470.19 480 0.14 80 120 0.67 80.8 208 0.392400.34 277 0.293470.23 480 0.17 95 120 0.78 93.2 208 0.452400.39 277 0.343470.274800.19 115 120 0.92 109.8 208 0.53 240 0.462770.40 347 0.324800.23 135 120 1.14 137.1 208 0.66 240 0.572770.49 347 0.404800.29 155 120 1.31 156.8 208 0.75 240 0.652770.57 347 0.454800.33 Ambient Temperature Lumen Multiplier 0°C 32°F 1.03 10°C 50°F 1.01 20°C 68°F 1.00 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 50°C 122°F 0.97 LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) PROJECTED LUMEN MAINTENANCE MULTIPLIER ELECTRICAL DATA: MICROSTRIKE Micro Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.841 – 3000K 0.977 0.861 0.647 3500K –0.900 – 4000K 1 0.926 0.699 5000K 1 0.937 0.791 OPERATING HOURS Ambient Temp.0 25,000 TM-21-22 60,000 25°C / 77°F 1.00 0.91 0.83 40°C / 104°F 0.99 0.90 0.82 Lumen maintenance values calculated per TM-21 using six times the LM-80 test time for the LED and in-situ thermal testing of the luminaire. Strike Lumen Multiplier CCT 70CRI 80CRI 90CRI 2700K 0.900 0.810 0.62 3000K 0.933 0.853 0.659 3500K 0.959 0.894 0.711 4000K 1.000 0.900 0.732 5000K 1.000 0.900 0.732 Monochromatic Amber Multiplier Amber See Amber Spec Sheet currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 7 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: ELECTRICAL DATA: STRIKE # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL2 39 120 0.38 45.1 208 0.222400.19 277 0.163470.13 480 0.09 55 120 0.53 63.1 208 0.302400.262770.233470.184800.13 85 120 0.73 88.0 208 0.422400.372770.32 347 0.254800.18 105 120 0.93 111.7 208 0.54 240 0.472770.40 347 0.324800.23 120 120 1.05 126.2 208 0.61 240 0.532770.46 347 0.364800.26 Type 2 Mounting Height: 30ft Type 3 Type 4WType 4F PHOTOMETRY currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 8 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: A B C D E 8.7" 9.7" 3.9" 7.0" 5.0" 221mm 246mm 99mm 178mm 127mm F G H 10.4" 11.0" 5.9" 264mm 279mm 150mm Weight 6.5 lbs (2.95 kgs) 7 54 9.73 8.73 7 11 5 4 9.73 5.85 10.37 8.73 A F G H C B D E RWL1 RWL1 with Integral Back Box N O P 15.4" 16.0" 5.5" 391mm 406mm 140mm I J K L M 14.0" 15.0" 3.9" 12.0" 5.0" 356mm 381mm 99mm 305mm 127mm Weight 16.5 lbs (7.48 kgs) 15.37 16 5.54 15 3.88 12 5 15.37 16 5.54 N O I J K P L M RWL2 RWL2 with Integral Back Box 4.92 5.91 2.07 Q R S 4.9" 5.9" 2.1" 124mm 150mm 53mm Q R Back Box Accessory 4.92 5.91 2.07S currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 9 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DIMENSIONS DATE:LOCATION: TYPE:PROJECT: CATALOG #: NXSP-14F NXSP-40F Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens Coverage and Detection PatternsWhen Mounted at 30ft and 45ft with Standard Lens 24' 48' 2.3” 1.3” 3.5” 2.3''58 mm 3.5''89 mm 1.3''33 mm 2.3” 1.3” 3.5” 2.3''58 mm 3.5''89 mm 1.3''33 mm 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0 '1 0'20'20' 60 ft 30'30'30' 0' 8' '7'3'3'07'11'11'24'24' SCP-8F A B 2.3"(59mm).8" (20mm) 60 ft 0' 0' 10' 10' 20' 20' 30' 30'10'10'20'30'20'30' 24' 11' 7' 3' 0' 3' 7' 11' 24' 0' 8' A B ADDITIONAL INFORMATION 2.33”59.2mm 0.78”19.7mm '3'0'3'6'9'21'9'6 12' 10' 20' 0' 15' Ceiling 5' '02'81'511 5'18'20'20'1 0'0'10'20' 0' 20' 10' 10' 20' 40 ft40 ft 0' 0' 10' 10' 20' 20'20' 15' 10' 5' 0' Ceiling 10'10'20'20'20' 18' 15' 12' 9' 6' 3' 0' 3' 6' 9' 12' 15' 18' 20' A B 2.3"(59mm).8" (20mm) A B SCP-2OF currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 10 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: • Low profile LED wall luminaire with a variety of IES distributions for lighting applications such as retail, commercial and industrial building mount • Featuring Strike and Micro Strike Optics which maximizes target zone illumination with minimal losses at the house-side, reducing light trespass issues • Visual comfort standard • Control options including photo control, occupancy sensing, NX Distributed Intelligence™, LightGRID+ and 7-Pin with networked controls • Battery Backup options available for emergency code compliance • Quick-mount adapter allows easy installation/maintenance • 347V and 480V versions for industrial applications and Canada DATE:LOCATION: TYPE:PROJECT: CONSTRUCTION • Die-cast housing with hidden vertical heat fins that are optimal for heat dissipation while keeping a clean smooth outer surface • Corrosion resistant, die-cast aluminum housing with powder coat paint finish • Powder paint finish provides durability in outdoor environments. Tested to meet 1000 hour salt spray rating OPTICS• Entire optical aperture illuminates to create a larger luminous surface area resulting in a low glare appearance without sacrificing optical performance • 48 or 160 midpower LEDs • 3000K, 4000K or 5000K (70 CRI/80 CRI) CCT • Zero uplight distributions • LED optics provide IES type II, III and IV distributions. Type II only available in RWL2 configurations INSTALLATION• Quick-mount adapter provides easy installation to wall or to recessed junction boxes (4" square junction box) • Designed for direct j-box mount. • Integral back box contains 1/2” conduit hubs • Integral backbox provided as standard with selection of some options ELECTRICAL• 120V-277V universal voltage 50/60Hz 0-10V dimming drivers • 347V and 480V dimmable driver option for all wattages above 35W • Ambient operating temperature -40˚C to 40˚C • Driver RoHS and IP66 CONTROLS (CONTINUED)• Dual Driver and Dual Power Feed options creates product configuration with 2 internal drivers for code compliance • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application. • LightGRID+ available with in fixture wireless control module, features dimming and occupancy sensor. Also available in 7-pin configuration CERTIFICATIONS • Certified to UL 1598 and CSA 22.2#250.0-24 for wet locations • IP65 rated housing • DLC® (DesignLights Consortium Qualified), with some Premium Qualified configurations. Not all product variations listed in this document are DLC® qualified. Refer to http://www.designlights.org for the most up-to-date list. • Emergency battery backup options are California Energy Commission (CEC) Title 20 Compliant • Meets IDA requirements using 3K CCT configuration at 0 degrees or tilt WARRANTY • 5 year limited warranty ELECTRICAL (CONTINUED) • 10kV Surge Protector optional • Drivers have greater than .90 power factor and less than 20% Total Harmonic Distortion • Dual Driver option provides 2 drivers within luminaire but only one set of leads exiting the luminaire, where Dual Power Feed provides two drivers which can be wired independently as two sets of leads are extended from the luminaire. Both options can not be included in one same fixture. • Dimming drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than 6” standard. CONTROLS• Photo control, occupancy sensor and wireless available for complete on/off and dimming control • Button photocontrol is suitable for 120-277V operation • 7-pin ANSI C136.41-2013 photocontrol receptacle option available for twist lock photocontrols or wireless control modules (control accessories sold separately) • NX Distributed Intelligence™ available with in fixture wireless control module, features dimming and occupancy sensor LightGRID+ available with in fixture wireless control module, features dimming and occupancy sensor • Integral Battery Backup provides emergency lighting for the required 90 minute path of egress • Battery Backup suitable for operating temperatures -25˚C to 40˚C. RWL1 battery is 12.5W RWL2 battery is 18W CATALOG #: SERVICE PROGRAM 7 11 54 9.73 5.85 10.37 8.73 RWL1 15.37 16 5.54 15 3.88 12 5 RWL2 Weight RWL1 6.5 lbs / 2.95 kg RWL2 16.5 lbs / 7.48 kg 8.7" 9.7" 7.0" 3.9"5.0" 14.0" 15.0" 3.9" 12.0" 5.0" FEATURES SPECIFICATIONS CONTROL TECHNOLOGY currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 1 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK – Control Options Network Distribution NXW NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor 2, 7, 12 NXWS16F NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming 2, 7, 12 NXWS40F NX Networked Wireless Enabled Integral NXSMP2-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming 2, 7, 12 WIR LightGRID+ In-Fixture Module 2, 9 Stand Alone Sensors SCP-8F Remote control programmable line voltage sensor 4, 5, 6, 8 SCP-20F Remote control programmable line voltage sensor 4, 5, 6, 8 BTS-14F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 1, 2, 5, 7, 8 BTS-40F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor 1, 2, 5, 7, 8 BTSO-12F Bluetooth® Programmable, PIR Occupancy/Daylight Sensor, up to 12' mounting height 1, 2, 5, 7, 8 Control Options 7PR_7-Pin Receptacle 8, 9 F Fusing 4 E Emergency Battery Backup 3, 8, 9 EH Emergency Battery w/ Heater Option 3, 8, 9 2DR Dual Driver 3, 9, 10 2PF Dual Power Feed 3, 9, 10 PC Button Photocontrol 5, 6, 11 SP 10kA Surge Protector 11 DATE:LOCATION: TYPE:PROJECT: CATALOG #: Example: RWL1–48L-10–3K7–2–UNV–BLS–E CATALOG # Control Options Standalone SCPREMOTE Order at least one per project location to program and control Notes: 1 replace "xxx" with color option Catalog Number Description WP-BB-XXX Accessory for conduit entry 1 –––––– Series # LEDs - Wattage CCT/CRI Distribution Voltage Color RWL1 Micro Strike Optics RWL2 Micro Strike Optics RWL2 Strike Optics 48L-10 1,000 Lumens 48L-15 2,000 Lumens 48L-20 2,500 Lumens 5, 6 48L-25 3,500 Lumens 48L-35 4,500 Lumens 48L-45 5,500 Lumens 5, 6 160L-45 6,500 Lumens 160L-50 7,500 Lumens 160L-65 9,500 Lumens 160L-80 11,000 Lumens 160L-95 13,000 Lumens 160L-115 15,000 Lumens 160L-135 17,500 Lumens 160L-155 19,500 Lumens 36L-39 5,500 Lumens, Strike 36L-55 7,500 Lumens, Strike 36L-85 10,000 Lumens, Strike 36L-105 12,500 Lumens, Strike 36L-120 14,000 Lumens, Strike 3K7 3000K, 70 CRI 4K7 4000K, 70 CRI 5K7 5000K, 70 CRI 3K8 3000K, 80 CRI 4K8 4000K, 80 CRI 5K8 5000K, 80 CRI 2 IES TYPE II 3 IES TYPE III 4F IES TYPE IV Forward 4W IES TYPE IV Wide UNV 120-277V 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Matte Textured PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color Notes: 1 Not available in RWL1 2 Cannot be combined with E, EH, 2DR, 2PF due to space constraints 3 Cannot be combined with Controls due to space constraints 4 Must specify voltage 5 Not available in 347V 6 Not available in 480V 7 Available in 480V in 95W, 115W, 155W only 8 Cannot be combined with 2DR or 2PF 9 Located in integral backbox which will be automatically added to the fixture if selected 10 Not available in RWL1-48L in 10W, 15W, or 20W 11 SP and PC cannot be combined due to space constraints 12 SP and PC cannot be combined due to space constraints *Based on space limitations, some options may not be combined. Consult Factory. = Service ProgramLimit of 15 luminairesGray Shading ORDERING GUIDE CONTROLS ACCESSORIES AND REPLACEMENT PARTS - MADE TO ORDER currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 2 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: OUTDOOR LIGHTING CONTROLS OPTIONS Control Option Ordering Logic & Description Control Option Functionality Control Option ComponentsNetworkableGroupingSchedulingOccupancy/ Motion Daylight Harvesting 0-10V Dimming On/Off Control Bluetooth App Programming Sensor Height NX WirelessLightGRID+IndependentCONTROLS FUNCTIONALITY WIR LightGRID+ In-Fixture Module ✓-✓--✓✓Gateway -WIR NXW NX Networked Wireless Radio Module NXRM2 and Bluetooth Programming, without Sensor ✓✓✓--✓✓✓-NXRM2-H NXWS16F NX Networked Wireless Enabled Integral NXSMP2-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming ✓✓✓✓✓✓✓✓16ft NXSMP2-LMO NXWS40F NX Networked Wireless Enabled Integral NXSMP2-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and Bluetooth Programming ✓✓✓✓✓✓✓✓40ft NXSMP2-HMO BTSO-12F Bluetooth® Programmable, BTSMP-OMNI-O PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓12ft BTSMP-OMNI-O BTS-14F Bluetooth® Programmable, BTSMP-LMO PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓14ft BTSMP-LMO BTS-40F Bluetooth® Programmable, BTSMP-HMO PIR Occupancy Sensor with Automatic Dimming Photocell and 360° Lens ---✓✓✓✓✓40ft BTSMP-HMO CONTROLS TECH SUPPORT 800-888-8006 (7:00 AM - 7:00 PM)NX LIGHTING CONTROLS FREE APP The NX Lighting Controls App is free to use mobile application for programming both NX Lighting Controls System or Standalone Bluetooth Sensors. The mobile app allows you to configure devices, discover and setup wireless enable luminiares and program NX system settings. Apple App: https://apps.apple.com/us/app/nx-lighting-controls/id962112904 Google Play: https://play.google.com/store/apps/details?id=io.cordova.NXBTR&hl=en_US&gl=US Apple App Google Play Occupancy Sensor Enabled Occupancy Sensor Sensitivity 7 Occupancy Sensor Timeout 15 Minutes Occupied Dim Level 100% Unoccupied Dim Level 0% Daylight Sensor Disabled Bluetooth Enabled 2.4GHz Wireless Mesh On "Passcode Factory Passcode: HubbN3T!"Enabled Occupancy Sensor Enabled Occupancy Sensor Sensitivity 7 Occupancy Sensor Timeout 8 Minutes Occupied Dim Level 100% Unoccupied Dim Level 50% Daylight Sensor Disabled DEFAULT SETTINGS NX WirelessStand AloneSensor Lens Coverage and Detection PatternsWhen Mounted at 40ft and 45ft with Standard Lens NXSMP2-HMO 45' Indoor Mounting Height30' Outdoor Mounting Height 56' at 40' Mounting Height 63' at 45' Mounting Height 40' Outdoor Mounting Height45' Intdoor Mounting HeightSensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens NXSMP2-LMO 24' 48' 0 824 241818121288404 Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens NXSMP2-LMO 24' 48' 0 824 241818121288404 Minor Motion Major Motion NXSMP2-OMNI 12' (3.7m) 22' (6.7m) Minor Motion Major Motion NXSMP2-OMNI 12' (3.7m) 22' (6.7m) NX WIRELESS COVERAGE PATTERNS currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 3 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK Control Option Ordering Logic & Description Control Option Functionality Control Option ComponentsNetworkableGroupingSchedulingOccupancy/ Motion Daylight Harvesting 0-10V Dimming On/Off Control Bluetooth App Programming Sensor Height IndependentDATE:LOCATION: TYPE:PROJECT: CATALOG #: SCP_F Sensor Control Programmable, sensor range, reference product specification for height selections ---✓✓✓✓-8ft or 40ft SCP_F 7PR 7-Pin Receptacle --Paired with external control -Paired with external control -Paired with external control --7PR OUTDOOR LIGHTING CONTROLS OPTIONS CONTROLS FUNCTIONALITY COVERAGE PATTERNS FOR SCP_F Lens Coverage GuideNo: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China SPECIFICATIONS Operating Temperature- ....................40° to 167°F (-40° to 75°C IP Rating when mounted to outdoor rated fixture ................IP-66 DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View 800.879.8585www.legrand.us/wattstopper No. 24226 – 08/16 rev. 1 © Copyright 2016 Legrand All Rights Reserved.© Copyright 2016 Tous droits réservés Legrand.© Copyright 2016 Legrand Todos los derechos reservados. Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation. Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper ne peut être tenu responsable de tout dommage consécutif causé par ou lié à l’utilisation ou à la performance de ce produit ou tout autre dommage indirect lié à la perte de propriété, de revenus, ou de profits, ou aux coûts d’enlèvement, d’installation ou de réinstallation. Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No existen obligaciones ni responsabilidades por parte de Wattstopper por daños consecuentes que se deriven o estén relacionados con el uso o el rendimiento de este producto u otros daños indirectos con respecto a la pérdida de propiedad, renta o ganancias, o al costo de extracción, instalación o reinstalación. WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA 3.2"81.3mm 1.04"26.4mm FSP‑L7: 360° Coverage The FSP-L7 has a lens that covers a 100' diameter area at a height of 40'. 0'10'10'20'20'30'30'40'40' 0' 27' 40'50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View Lens Coverage GuideNo: 24226 – 08/16 rev. 1 Catalog Number: FSP-L2/FSP-L3/FSP-L7 Country of Origin: Made in China SPECIFICATIONS Operating Temperature- ....................40° to 167°F (-40° to 75°C IP Rating when mounted to outdoor rated fixture ................IP-66 DESCRIPTION AND OPERATION The FSP-2xx occupancy sensor is modular, consisting of two parts, a Sensor Module and a Lens. The Sensor Module is selected according to the type of power available in the installation, and the desired operational features. The Lens is selected based on the coverage desired for the sensor application. Lens modules are IP-66 rated when combined with an FSP-2xx sensor mounted to an outdoor rated fixture. Sensors must directly “see” motion of an occupant to detect them, so careful consideration must be given to sensor placement. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight. The FSP-L2, FSP-L3, and FSP-L7 have multi-cell, multi-tier Fresnel lenses with a 360° view. This document describes the coverage patterns available with each lens. Coverages shown in the diagrams are maximum, measured in linear feet. They represent coverage for full-step walking motion, with no barriers or obstacles. Passive Infrared Sensing in Warehouses Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 89-92°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks. See the Sensor Module Installation Instructions for a complete description of the assembled unit installation, wiring, and safety information. 2.33”59.2mm 0.78”19.7mm FSP-L2: 360° Coverage The FSP-L2 is designed for mounting at heights between 8' to 12'. It provides a 48' diameter coverage area when mounted at a height of 8', or a 72' diameter coverage area at 12'. 0'3'9'6'3'6'9'12'12' 10' 20' 0 15' Ceiling 5' 15'18'20'15'18'20' ' 20'10'0'10'20' 0' 20' 10' 10' 20' 40 ft 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 60 ft FSP-L3: 360° Coverage The FSP-L3 has a high density lens that covers a 40' diameter area at a height of 20'. 0' 8' 0'3'3'7'7'11'11'24'24' Coverage Top View @ 12ft.Coverage Top View @ 20 ft. Coverage Side View Coverage Side View anties its products to be free erials and workmanship for a ears. There are no obligations Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No ANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA "mm 1.04"26.4mm Coverage s a lens that covers a 100' diameter area at 0'10'10'20'20'30'30'40'40' 0' 27' 40' 50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' 800.879.8585 www.legrand.us/wattstopper No. 24226 – 08/16 rev. 1 © Copyright 2016 Legrand All Rights Reserved.© Copyright 2016 Tous droits réservés Legrand.© Copyright 2016 Legrand Todos los derechos reservados. Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation. Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper ne peut être tenu responsable de tout dommage consécutif causé par ou lié à l’utilisation ou à la performance de ce produit ou tout autre dommage indirect lié à la perte de propriété, de revenus, ou de profits, ou aux coûts d’enlèvement, d’installation ou de réinstallation. Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No existen obligaciones ni responsabilidades por parte de Wattstopper por daños consecuentes que se deriven o estén relacionados con el uso o el rendimiento de este producto u otros daños indirectos con respecto a la pérdida de propiedad, renta o ganancias, o al costo de extracción, instalación o reinstalación. WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA 3.2"81.3mm 1.04"26.4mm FSP‑L7: 360° Coverage The FSP-L7 has a lens that covers a 100' diameter area at a height of 40'. 0'10'10'20'20'30'30'40'40' 0' 27' 40'50'50' 15' Coverage Top View @40ft Coverage Side View 50'25'0'25'50' 0' 50' 25' 25' 50' 100' currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 4 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: Description Nominal Wattage System Watts Dist. Type 5K (5000K NOMINAL 70 CRI)4K (4000K NOMINAL 70 CRI)3K (3000K NOMINAL 70 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G RWL1 10 10.1 3 1362 135 0 0 1 1355 134 0 0 1 1303 129 0 0 1 4W 1343 133 0 0 1 1336 132 0 0 1 1285 127 0 0 1 15 14.5 3 1972 136 1 0 1 1962 135 1 0 1 1887 130 1 0 1 4W 1945 134 0 0 1 1935 133 0 0 1 1861 128 0 0 1 20 19.9 3 2722 137 1 0 1 2709 136 1 0 1 2605 131 1 0 1 4W 2685 135 1 0 1 2672 134 1 0 1 2569 129 1 0 1 25 28.0 3 3749 134 1 0 1 3732 133 1 0 1 3588 128 1 0 1 4W 3698 132 1 0 1 3680 131 1 0 1 3538 126 1 0 1 35 36.9 3 4751 129 1 0 2 4728 128 1 0 2 4546 123 1 0 1 4W 4685 127 1 0 2 4663 126 1 0 2 4483 121 1 0 2 45 46.5 3 5812 125 1 0 2 5784 124 1 0 2 5562 120 1 0 2 4W 5731 123 1 0 2 5704 123 1 0 2 5485 118 1 0 2 RWL2 45 46.1 2 6701 145 1 0 2 6668 145 1 0 2 6412 139 1 0 2 3 6812 148 1 0 2 6780 147 1 0 2 6519 141 1 0 2 4W 6678 145 1 0 2 6646 144 1 0 2 6390 139 1 0 2 50 54.0 2 7747 143 1 0 2 7710 143 1 0 2 7413 137 1 0 2 3 7876 146 1 0 2 7838 145 1 0 2 7537 140 1 0 2 4W 7720 143 1 0 2 7683 142 1 0 2 7388 137 1 0 2 65 67.2 2 9539 142 1 0 2 9494 141 1 0 2 9129 136 1 0 2 3 9699 144 2 0 2 9652 144 2 0 2 9281 138 2 0 2 4W 9507 141 2 0 2 9461 141 2 0 2 9097 135 2 0 2 80 80.8 2 11228 139 2 0 2 11174 138 2 0 2 10745 133 2 0 2 3 11416 141 2 0 2 11361 141 2 0 2 10924 135 2 0 2 4W 11190 138 2 0 2 11136 138 2 0 2 10708 133 2 0 2 95 93.2 2 13148 141 2 0 2 13085 140 2 0 2 12582 135 2 0 2 3 13368 143 2 0 2 13304 143 2 0 2 12792 137 2 0 2 4W 13103 141 2 0 2 13040 140 2 0 2 12539 135 2 0 2 115 109.8 2 15102 138 2 0 3 15030 137 2 0 3 14452 132 2 0 3 3 15354 140 2 0 3 15281 139 2 0 3 14693 134 2 0 3 4W 15050 137 2 0 3 14978 136 2 0 3 14402 131 2 0 3 135 137.1 2 17533 128 2 0 3 17449 127 2 0 3 16778 122 2 0 3 3 17826 130 2 0 3 17740 129 2 0 3 17058 124 2 0 3 4W 17473 127 2 0 3 17389 127 2 0 3 16720 122 2 0 3 155 156.8 2 19495 124 2 0 3 19402 124 2 0 3 18656 119 2 0 3 3 19821 126 2 0 3 19726 126 2 0 3 18967 121 2 0 3 4W 19542 125 2 0 3 19448 124 2 0 3 18700 119 2 0 3 PERFORMANCE DATA: MICROSTRIKE currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 5 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: PERFORMANCE DATA: STRIKE Description Nominal Wattage System Watts Dist. Type 5K (5000K NOMINAL 70 CRI)4K (4000K NOMINAL 70 CRI)3K (3000K NOMINAL 70 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G RWL2 39 45.1 2 5618 125 1 0 1 5723 127 1 0 1 5251 116 1 0 1 3 5644 125 1 0 2 5749 127 1 0 2 5274 117 1 0 2 4F 5662 126 1 0 2 5768 128 1 0 2 5291 117 1 0 2 4W 5652 125 1 0 2 5757 128 1 0 2 5282 117 1 0 2 55 63.1 2 7458 118 1 0 2 7659 121 1 0 2 6970 110 1 0 2 3 7552 120 1 0 2 7694 122 1 0 2 7058 112 1 0 2 4F 7577 120 1 0 2 7718 122 1 0 2 7081 112 1 0 2 4W 7564 120 1 0 3 7705 122 1 0 3 7069 112 1 0 3 85 88.0 2 10121 115 2 0 2 10311 117 2 0 2 9459 107 2 0 2 3 10167 116 1 0 3 10357 118 1 0 3 9502 108 1 0 3 4F 10200 116 1 0 2 10390 118 1 0 2 9532 108 1 0 2 4W 10182 116 1 0 3 10372 118 1 0 3 9516 108 1 0 3 105 111.7 2 12022 108 2 0 2 12247 110 2 0 2 11235 101 2 0 2 3 12075 108 2 0 3 12301 110 2 0 3 11285 101 2 0 3 4F 12115 108 1 0 3 12341 110 1 0 3 11322 101 1 0 2 4W 12093 108 2 0 3 12319 110 2 0 3 11302 101 1 0 3 120 126.2 2 12889 102 2 0 2 13130 104 2 0 2 12046 95 2 0 2 3 12947 103 2 0 3 13189 105 2 0 3 12100 96 2 0 3 4F 12989 103 1 0 3 13232 105 1 0 3 12139 96 1 0 3 4W 12966 103 2 0 3 13208 105 2 0 3 12118 96 1 0 3 currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 6 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL1 10 120 0.08 10.1 208 0.05 240 0.042770.043470.034800.02 15 120 0.12 14.5 208 0.072400.06 277 0.053470.04 480 0.03 20 120 0.17 19.9 208 0.102400.08 277 0.073470.06 480 0.04 25 120 0.23 28.0 208 0.132400.12 277 0.103470.08 480 0.06 35 120 0.31 36.9 208 0.182400.15 277 0.133470.114800.08 45 120 0.39 46.5 208 0.22 240 0.192770.17 347 0.134800.10 # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL2 45 120 0.38 46.1 208 0.22 240 0.192770.173470.134800.10 50 120 0.45 54.0 208 0.262400.23 277 0.193470.16 480 0.11 65 120 0.56 67.2 208 0.322400.28 277 0.243470.19 480 0.14 80 120 0.67 80.8 208 0.392400.34 277 0.293470.23 480 0.17 95 120 0.78 93.2 208 0.452400.39 277 0.343470.274800.19 115 120 0.92 109.8 208 0.53 240 0.462770.40 347 0.324800.23 135 120 1.14 137.1 208 0.66 240 0.572770.49 347 0.404800.29 155 120 1.31 156.8 208 0.75 240 0.652770.57 347 0.454800.33 Ambient Temperature Lumen Multiplier 0°C 32°F 1.03 10°C 50°F 1.01 20°C 68°F 1.00 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 50°C 122°F 0.97 LUMINAIRE AMBIENT TEMPERATURE FACTOR (LATF) PROJECTED LUMEN MAINTENANCE MULTIPLIER ELECTRICAL DATA: MICROSTRIKE Micro Strike Lumen Multiplier CCT 70 CRI 80 CRI 90 CRI 2700K –0.841 – 3000K 0.977 0.861 0.647 3500K –0.900 – 4000K 1 0.926 0.699 5000K 1 0.937 0.791 OPERATING HOURS Ambient Temp.0 25,000 TM-21-22 60,000 25°C / 77°F 1.00 0.91 0.83 40°C / 104°F 0.99 0.90 0.82 Lumen maintenance values calculated per TM-21 using six times the LM-80 test time for the LED and in-situ thermal testing of the luminaire. Strike Lumen Multiplier CCT 70CRI 80CRI 90CRI 2700K 0.900 0.810 0.62 3000K 0.933 0.853 0.659 3500K 0.959 0.894 0.711 4000K 1.000 0.900 0.732 5000K 1.000 0.900 0.732 Monochromatic Amber Multiplier Amber See Amber Spec Sheet currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 7 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: ELECTRICAL DATA: STRIKE # OF LEDS Nominal Wattage Input Voltage Oper. Current (Amps)System Power (Watts) RWL2 39 120 0.38 45.1 208 0.222400.19 277 0.163470.13 480 0.09 55 120 0.53 63.1 208 0.302400.262770.233470.184800.13 85 120 0.73 88.0 208 0.422400.372770.32 347 0.254800.18 105 120 0.93 111.7 208 0.54 240 0.472770.40 347 0.324800.23 120 120 1.05 126.2 208 0.61 240 0.532770.46 347 0.364800.26 Type 2 Mounting Height: 30ft Type 3 Type 4WType 4F PHOTOMETRY currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 8 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DATE:LOCATION: TYPE:PROJECT: CATALOG #: A B C D E 8.7" 9.7" 3.9" 7.0" 5.0" 221mm 246mm 99mm 178mm 127mm F G H 10.4" 11.0" 5.9" 264mm 279mm 150mm Weight 6.5 lbs (2.95 kgs) 7 54 9.73 8.73 7 11 5 4 9.73 5.85 10.37 8.73 A F G H C B D E RWL1 RWL1 with Integral Back Box N O P 15.4" 16.0" 5.5" 391mm 406mm 140mm I J K L M 14.0" 15.0" 3.9" 12.0" 5.0" 356mm 381mm 99mm 305mm 127mm Weight 16.5 lbs (7.48 kgs) 15.37 16 5.54 15 3.88 12 5 15.37 16 5.54 N O I J K P L M RWL2 RWL2 with Integral Back Box 4.92 5.91 2.07 Q R S 4.9" 5.9" 2.1" 124mm 150mm 53mm Q R Back Box Accessory 4.92 5.91 2.07S currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 9 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK DIMENSIONS DATE:LOCATION: TYPE:PROJECT: CATALOG #: NXSP-14F NXSP-40F Sensor Lens Coverage and Detection PatternsWhen Mounted at 8ft with Low Mount Lens Coverage and Detection PatternsWhen Mounted at 30ft and 45ft with Standard Lens 24' 48' 2.3” 1.3” 3.5” 2.3''58 mm 3.5''89 mm 1.3''33 mm 2.3” 1.3” 3.5” 2.3''58 mm 3.5''89 mm 1.3''33 mm 2.33"59.2mm 0.78"19.7mm 30' 20' 10' 10' 20' 0' 10'0 '1 0'20'20' 60 ft 30'30'30' 0' 8' '7'3'3'07'11'11'24'24' SCP-8F A B 2.3"(59mm).8" (20mm) 60 ft 0' 0' 10' 10' 20' 20' 30' 30'10'10'20'30'20'30' 24' 11' 7' 3' 0' 3' 7' 11' 24' 0' 8' A B ADDITIONAL INFORMATION 2.33”59.2mm 0.78”19.7mm '3'0'3'6'9'21'9'6 12' 10' 20' 0' 15' Ceiling 5' '02'81'511 5'18'20'20'1 0'0'10'20' 0' 20' 10' 10' 20' 40 ft40 ft 0' 0' 10' 10' 20' 20'20' 15' 10' 5' 0' Ceiling 10'10'20'20'20' 18' 15' 12' 9' 6' 3' 0' 3' 6' 9' 12' 15' 18' 20' A B 2.3"(59mm).8" (20mm) A B SCP-2OF currentlighting.com/beacon © 2025 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions. Page 10 of 10 Rev 10/22/25 Ratio_Wall_Spec_Sheet_R12 RATIO Wall RWL1/RWL2 LED WALLPACK Archiline Wall 1 Updated 1.2026 410 381 1497 inter-lux.com answers@inter-lux.com Inter-lux reserves the right to make technical changes without notice. Ordering Information AR W ID Product Mounting/Frame Type Length Wattage Operation Color Temp Optic +Cables3 AR = Archiline W = Wall OB = Open Beam DL = DarkLight1 12 = 12.6"15 = 14.5W ID = Integral (0-10V dim) 27 = 2700K 30 = 3000K 35 = 3500K 40 = 4000K NSP = Narrow Spot² SP = Spot FL = Flood WFL = Wide Flood EL = Elliptic/Graze WW = Wall Washer² E99826 E99822 E99823 E99824 E99825 24 = 24.4"27 = 27W 36 = 36.2"41 = 41W 48 = 48"54 = 53.5W 60 = 59.8"65 = 65W 1 NA for 59.8"2 Not available for DL 2 See page 2 Delivered Lumens (Open Beam)* 12.6"24.4"36.2"48"59.8" Narrow Spot 1348 2471 3819 4943 5860 Spot 1048 2359 3376 4369 5243 Flood 974 2336 3290 4258 5109 Wide Flood 1085 2445 3418 4424 5310 Elliptic/Grazer 1009 2381 3285 4251 5101 Wall Washer 1174 2669 3432 4441 5329 *Values shown for 3000K Delivered Lumens (DarkLight)*12.6"24.4"36.2"48" Spot 762 1827 2327 3103 Flood 687 1721 2270 3026 Wide Flood 838 2064 2369 3159 Elliptical 792 2014 2508 3344 *Values shown for 3000K 12.6" (14.5W) 24.4" (27W) 36.2" (41W) 48" (53.5W) 59.8" (65W) General: Archiline is a family of high-output, low glare linear LED in-grade and wall fixtures suitable to illuminate outdoor architectural elements such as facades, columns, landscape, and pathway lighting. The PRO version reaches up to 150', making it perfect for tall buildings and towers. Available in Frameless (Drive-Over), Aluminum or Stainless-Steel frame, with a broad range of optics, from Narrow Spot to Asymmetric Wall Washer and Elliptic. Its unique Dark Light (anti-glare) system provides a must-see quiet illumination, while losing almost no output. Fixture Body: Corrosion resistant 6060 Aluminum, Anodized (20 µm), Aluminum finish Trim: Frameless, ideal for continuous runs. Extra clear glass - Tempered Mounting: 316 Marine Grade Steel adjustable bracket. Dimensions/Weight: 12.6" (2.43 lbs) – 24.4" (4.4 lbs) – 36.2" (6.61 lbs) – 48" (7.72 lbs) – 59.8" (9.26 lbs) Driver: Integral 120-277V 1% (logarithmic curve) 0-10V dimming, or Non-Dim. Wattages: 14.5W (12.6") – 27W (24.4") – 41W (36.2") – 53.5W (48") – 65W (59.8") Cable: Fixture comes with 0.66' of cable (Power cable required, ordered separately). Safety features: Built-in Aquastop® (Anti-wicking) and TCS® (Over tension and electrical discharge protection) systems. IP rating: IP67 for temporary flooding up to 3.28' depth for up to a maximum of 30 mins. IK rating: IK 10 ETL Certification: ETL, wet location Optics: Fixed or Adjustable. Available in Narrow Spot – Spot – Flood – Wide Flood – Elliptic, Asymmetric Wall Washer. Most Fixed variants are also available with Dark Light (Anti-glare) system. Color temperatures: 2700K – 3000K – 3500K – 4000K. CRI: 80+ Lumen Maintenance: L70 projections tested at Tj 65° C and Ta 25°. Warranty: 5-year Limited Warranty on fixtures. 1-year Limited Warranty on Remote Drivers. IP67 410 381 1497 inter-lux.com answers@inter-lux.com Inter-lux reserves the right to make technical changes without notice. 2 Archiline Wall Cables 0-10V E99826 E99822 E99823 E99824 E99825 39.4" power supply cable +0-10V dimming F 5 pin 196.9" power supply cable +0-10V dimming F 5 pin 39.4" extension cable for power +0-10V dimming M+F 5 pin 196.9" extension cable for power +0-10V dimming M+F 5 pin 393.7" extension cable for power +0-10V dimming M+F 5 pin 12.6" 14.5W ID 24.4" 27W ID 48" 53.5W ID 36.2" 41W ID 59.8" 65W ID 3.1 2.5 3.2 - 3.7 1.8 3.1 2.5 3.2 - 3.7 1.8 3.1 2.5 3.2 - 3.7 1.8 12.6 4.8 3.9 3.8 1.8 3.1 3.2 - 3.7 2.5 1.8 3.2 - 3.7 2.53.14.8 24.4 3.9 4.8 36.2 3.9 4.8 4.8 4.8 4.8 3.9 3.9 59.8 48 3.9 3.9 4341 Fulcrum Way NE, Rio Rancho New Mexico 87144 Revised December 8, 2025 8:55 AM Specifications subject to change without notice 1/10 P.: 505.345.0888 |insightlighting.com PROJECT:TYPE:CATALOG #: MEDLEY X PERFORMANCE LINEAR | WHITE LIGHT + STATIC COLORS DIMENSIONS CES 6.00" 180° 3.25"PNS 12”, 24”, 36”, 48” (NOMINAL) 9.00” MIN 48.00” MAX 3.25" PROFILE FIXTURES SHOWN: MX-MO-4000K-U-ASY-24-DIM-TWH-CRF PERFORMANCE HOUSING EXTRUDED ALUMINUM HOUSING LENS TEMPERED GLASS CONTROL 0-10V DIMMING, DMX DIMMING, LUTRON HI-LUME OPERATING TEMP -20°C TO 50°C (PLEASE CONTACT FACTORY FOR EXTREME TEMPERATURES) 75,000 HOURS ETL AND cETL FOR WET LOCATION, CLASS 1, IP67 CRI VOLTAGE POWER REMOTE POWER SUPPLY FINISH HIGH DURABILITY POWDER COATING DIMENSIONS 3.25" X 4.25" WARRANTY 5-YEAR LIMITED LUMEN MAINTENANCE CERTIFICATION UP TO 117,530 PEAK CANDELA 82 (± 200) UNIVERSAL 110-208V, 277V ANSI C136.31 IP67 IP68IP66 OPTICS Not all available optics shown 10°x 10°20°x 20°60°x 60° 7°x 60°10°x 60°20°x 60°40°x 60° 40°x 40° STANDARD FINISHES TEXTUREDL. BRONZE TEXTUREDGRAY TEXTUREDS. STONETEXTUREDBRONZETEXTUREDWHITETEXTUREDBLACK LIGHT SOURCE OPTICS CCT 3.5 W/FT, 9.0 W/FT, 15.0 W/FT 27K, 30K, 35K, 40K, RED, GREEN, BLUE, AMBER, LFS 7° X 60°, 10° X 10°, 10° X 60°, 10° X 90°, 20° X 20°, 20° X 60°, 40° X 40°, 40° X 60°, 40° X 90°, 60° X 60°, 90° X 90° 80° X 80°, ASYMMETRIC GRAZE MX--------- 4341 Fulcrum Way NE, Rio Rancho New Mexico 87144 Revised December 8, 2025 8:55 AM Specifications subject to change without notice 2/10 P.: 505.345.0888 |insightlighting.com PROJECT:TYPE:CATALOG #: MEDLEY X PERFORMANCE LINEAR | WHITE LIGHT + STATIC COLORS ------MX 9234567 108 MX 1 Separate options with dashes SPECIFICATION 5 OPTICAL DISTRIBUTION 7° X 60°760 10° X 10°1010 10° X 10° optic is intended for a 6.00" fixture setback from the surface 10° X 60°1060 10° X 90°1090 20° X 20°2020 20° X 60°2060 20° X 90°2090 40° X 40°4040 40° X 60°4060 40° X 90°4090 60° X 60°6060 60° X 90°6090 80° X 80°8080 ASYM GRAZE UPLIGHT, LEFT POWER FEED 1 ASUL ASYM GRAZE UPLIGHT, RIGHT POWER FEED 1 ASUR ASYM GRAZE DOWNLIGHT, LEFT POWER FEED 1 ASDL ASYM GRAZE DOWNLIGHT, RIGHT POWER FEED 1 ASDR 1 Asym Graze: See page 4 for details. 6 MOUNTING SINGLE FIXTURES CLOSE END CES SURFACE SMS EXTENDED ARM EAS-X PENDANT PNS-X FIXTURE RUNS EXTENDED ARM EAM-X PENDANT PNM-X 7 FIXTURE LENGTH 12"12 24"24 36"36 48"48 CONTINUOUS RUN X Specify run length in 1' increments (ex: 20FT).Contact factory as drawings are requiredContinuous run option (CR) must be included.See options. See page 8 for typical continuous run layouts. 8 CONTROL OPTIONS NON DIMMING NON 0-10V DIMMING (1%)DIM LUTRON L2DOE HI-LUME L3DOE DMX DIMMING 2 DMX Power supplies must be ordered. See below. 2 Default factory setting is DMX System Resolution 2 Fixtures are not pre-addressed/labeled at the factory. A DMXCAT Tool is required for on-site fixture resolution/addressing. See below. 2 A CDS/RDM Distribution Kit is required. Must be ordered separately. See below. 2 DMX controls are required. Order separately. 9 FIXTURE FINISH TEXTURED WHITE TWH TEXTURED BLACK TBL TEXTURED BRONZE TBR TEXTURED LIGHT BRONZE TLB TEXTURED GRAY TGR TEXTURED NATURAL TNA TEXTURED SANDSTONE TSA CUSTOM COLOR CUS Contact factory for custom color. Additional charges will apply. 10 OPTIONS CONTINUOUS RUN CR HIGH CRI HIC LOUVER LV CORROSION RESISTANT FINISH CRF CRF complies with ASTM B117. CRF is recommended for coastal or extreme exterior environments 1 FIXTURE MEDLEY X MX 2 WATTAGE LOW OUTPUT LO 3.5 W/FT MEDIUM OUTPUT MO 9.0 W/FT HIGH OUTPUT HO 15 W/FT 3 CCT 2200K 2200K 2700K 2700K 3000K 3000K 3500K 3500K 4000K 4000K RED REDST GREEN GRNST BLUE BLUST AMBER AMBST Kelvin tunable 2200K-6500K Contact factory for additional CCT combinations 4 LIGHT DIRECTION UPLIGHT U DOWNLIGHT D --- REMOTE POWER SUPPLIES & DMX TOOLS (ORDER SEPARATELY) 1 CDS-RDM - REQUIRED FOR DMX DIMMING PART NUMBER DMX/RDM DISTRIBUTION KIT - IP67 S A 27411 Consists of 4 outputs Each output is limited to (1) run per output - up to 96 fixtures max 2 DMXCAT - REQUIRED FOR DMX DIMMING PART NUMBER REMOTE DMX/RDM ADDRESSING & MONITORING TOOL - IP67 SA27636 Uses Bluetooth LE technology for communication with the smartphone and the DMXcat app (up to a 50’ range). Allows for on-site fixture resolution and addressing. 1 CONTRA EXTERIOR REMOTE POWER SUPPLIES - REQUIRED PART NUMBER NO DIMMING - LOW OUTPUT, 96W (120V-277V)CEL 0-10V DIMMING - LOW OUTPUT, 96W (120V-277V)CELDIM DMX DIMMING - LOW OUTPUT, 96W (120V-277V)CELDMX LUTRON L3DOE - LOW OUTPUT, 96W (120V-277V)CELLU EcoSystem 24V constant voltage with Soft-on, Fade to Black dimming. Dimming control system to be supplied by others. NO DIMMING - STANDARD OUTPUT, 240W (120V-277V)CES 0-10V DIMMING - STANDARD OUTPUT, 240W (120V-277V)CESDIM DMX DIMMING - STANDARD OUTPUT, 240W (120V-277V)CESDMX NO DIMMING - HIGH OUTPUT, (2)-240W (120V-277V)CEH 0-10V DIMMING - HIGH OUTPUT, (2)-240W (120V-277V)CEHDIM DMX DIMMING - HIGH OUTPUT, (2)-240W (120V-277V)CEHDMX Above wattages are based on 75% of the Power Supply total wattage capacity. See page 9 for maximum fixtures per power supply. 4341 Fulcrum Way NE, Rio Rancho New Mexico 87144 Revised December 8, 2025 8:55 AM Specifications subject to change without notice 3/10 P.: 505.345.0888 |insightlighting.com PROJECT:TYPE:CATALOG #: MEDLEY X PERFORMANCE LINEAR | WHITE LIGHT + STATIC COLORS PERFORMANCE ALL INSIGHT WHITE LIGHT IES FILES ARE CALCULATED WITH 4000K. FOR ESTIMATIONS OF ADDITIONAL CCTS, PLEASE USE THE FOLLOWING MULTIPLIERS: 2700K MULTIPLIER 3000K MULTIPLIER 3500K MULTIPLIER 0.87 0.90 0.95LUMEN MULTIPLIERS MULTIPLY THE 4000K LUMEN DATA BY THE ABOVE MULTIPLIERS THE ABOVE DATA IS FOR 0-10V DIMMING. MULTIPLY THE 0-10V DATA BY 0.80 (LLF) FOR DMX DIMMING ON ALL WHITE LIGHT. MX LOW OUTPUT (3.5 W/FT)MEDIUM OUTPUT (9.0 W/FT)HIGH OUTPUT (15.0 W/FT) CCT AND FIXTURE LENGTH OPTIC DELIVERED LUMENS (LM) EFFICACY (LM/W) PEAK CANDELA (CBCP) DELIVERED LUMENS (LM) EFFICACY (LM/W) PEAK CANDELA (CBCP) DELIVERED LUMENS (LM) EFFICACY (LM/W) PEAK CANDELA (CBCP) 4000K, 24"7° X 60°998 107.0 3,662 1,685 110.0 6,189 3,366 98.0 12,363 10° X 10°932 100.5 17, 011 1,566 103.0 28,686 3,158 91.2 58,765 10° X 60°804 86.6 2,904 1,348 88.4 4,871 2,709 77.3 9,972 20° X 20°948 102.1 7,658 1,601 102.4 12,983 3,238 93.3 26,193 20° X 60°862 92.8 1,893 1,451 96.2 3,207 2,914 84.6 6,379 40° X 40°1001 108.0 1,395 1,688 111. 0 2,338 3,392 98.8 4,733 40° X 60°896 96.7 724 1,497 98.6 1, 211 3,039 88.1 2,470 60° X 60°993 107.1 882 1,666 109.3 1,485 3,354 97.7 2,999 80° X 80°912 98.2 585 1,525 100.0 976 3,081 88.8 1,980 100° X 100°620 86.8 263 1,964 93.3 829 3,230 94.4 1,370 ASY 888 96.3 3,134 1,473 97.8 5,199 2,890 88.2 9,369 4000K, 36"7° X 60°1,496 107.0 5,492 2,527 110.0 9,283 5,048 98.0 18,544 10° X 10°1,398 100.5 25,516 2,349 103.0 43,029 4,737 91.2 88,148 10° X 60°1,205 86.6 4,357 2,022 88.4 7,306 4,063 77.3 14,957 20° X 20°1,421 102.1 11,486 2,402 102.4 19,474 4,856 93.3 39,289 20° X 60°1,292 92.8 2,840 2,177 96.2 4,810 4,371 84.4 9,569 40° X 40°1,502 108.0 2,093 2,531 111. 0 3,506 5,088 98.8 7,100 40° X 60°1,344 96.7 1,086 2,245 98.6 1,817 4,559 88.1 3,704 60° X 60°1,489 107.1 1,322 2,499 109.3 2,228 5,031 97.7 4,499 80° X 80°1,368 98.2 877 2,287 100.1 1,464 4,621 88.8 2,970 100° X 100°929 86.8 394 2,946 93.3 1,244 4,844 94.4 2,054 ASY 1,332 96.3 4,700 2,209 97.8 7,798 4,335 88.2 14,053 4000K, 48"7° X 60°1,995 107.0 7,323 3,369 110.0 12,377 6,731 98.0 24,725 10° X 10°1,864 100.5 34,021 3,132 103.0 57,372 6,316 91.2 117,530 10° X 60°1,607 86.6 5,809 2,696 88.4 9,741 5,417 77.3 19,943 20° X 20°1,895 102.1 15,315 3,202 102.4 25,965 6,475 93.3 52,385 20° X 60°1,723 92.8 3,786 2,902 96.2 6,413 5,828 84.6 12,758 40° X 40°2,002 108.0 2,790 3,375 110 . 7 4,675 6,784 98.8 9,466 40° X 60°1,792 96.7 1,448 2,993 98.6 2,422 6,078 88.1 4,939 60° X 60°1,985 107.1 1,763 3,332 109.3 2,970 6,708 97.7 5,998 80° X 80°1,824 98.2 1,169 3,049 100.1 1,952 6,161 88.8 3,960 100° X 100°1,239 86.8 525 3,928 93.3 1,658 6,459 94.4 2,739 ASY 1,776 96.3 6,267 2,945 97.8 10,397 5,780 88.2 18,787 --------- 4341 Fulcrum Way NE, Rio Rancho New Mexico 87144 Revised December 8, 2025 8:55 AM Specifications subject to change without notice 4/10 P.: 505.345.0888 |insightlighting.com PROJECT:TYPE:CATALOG #: MEDLEY X PERFORMANCE LINEAR | WHITE LIGHT + STATIC COLORS MX----- ASYMMETRIC DISTRIBUTIONS/LIGHT DIRECTION /FEED LOCATIONS ASYMMETRIC GRAZE UPLIGHT | RIGHT POWER FEEDASYMMETRIC GRAZE UPLIGHT | LEFT POWER FEED ASYMMETRIC GRAZE DOWNLIGHT | RIGHT POWER FEEDASYMMETRIC GRAZE DOWNLIGHT | LEFT POWER FEED ASYMMETRIC WASH UPLIGHT | LEFT POWER FEEDCEILING ASYMMETRIC WASH UPLIGHT | RIGHT POWER FEEDCEILING ASYMMETRIC WASH DOWNLIGHT | LEFT POWER FEEDCEILING ASYMMETRIC WASH DOWNLIGHT | RIGHT POWER FEEDCEILING ---- 6.00" 3.25" 3.25" DIM A MOUNTING DETAIL Ø0.25” 90° 90° 2.50” 1.25” 1.50” 0.50” 48.00”LEAD DIM BO.C. 5.00" 3.25" 3.25" DIM A MOUNTING DETAIL Ø0.25” 1.75” 1.13” 0.56” 35° 35° 0.31” 48.00”LEAD ADJUSTABLE DIM BO.C. 4341 Fulcrum Way NE, Rio Rancho New Mexico 87144 Revised December 8, 2025 8:55 AM Specifications subject to change without notice 5/10 P.: 505.345.0888 |insightlighting.com PROJECT:TYPE:CATALOG #: MEDLEY X PERFORMANCE LINEAR | WHITE LIGHT + STATIC COLORS DIMENSIONS CLOSE END (CES) SURFACE (SMS) FIXTURE LENGTH DIM A DIM A DIM B DIM B 27.13" 27.13" 39.13" 39.13" 51.13" 51.13" 15.13" 15.13" 14.13" 6.00" MIN | 9.00" MAX 26.13" 6.00" MIN | 21.00" MAX 38.13" 12.00" MIN | 33.00" MAX 50.13" 24.00" MIN | 45.00" MAX 24" 24" 12" 12" 36" 36" 48" 48"FIXTURE LENGTH MX--------- 4341 Fulcrum Way NE, Rio Rancho New Mexico 87144 Revised December 8, 2025 8:55 AM Specifications subject to change without notice 6/10 P.: 505.345.0888 |insightlighting.com PROJECT:TYPE:CATALOG #: MEDLEY X PERFORMANCE LINEAR | WHITE LIGHT + STATIC COLORS EXTENDED ARM (EAS AND EAM) DIMENSIONS DIM A DIM B 27.13"39.13"51.13"15.13" 15.88"27.88"39.88"51.88" 24"12"36"48"FIXTURE LENGTH 6” MIN18” MAX 3.25" 12”FLYINGLEAD DIM BO.C. DIM A 3.25" CANOPY FINISH MATCHES FIXTURE HOUSING UNLESS SPECIFIEDOTHERWISE 1/4-20FASTENERSBY OTHERS 1/4-20FASTENERSBY OTHERS DIM B O.C.4.0 J-BOXBY OTHERS 4.75” 4.18”4.18” DIM BO.C. DIM A DIM BO.C. DIM A 60° 60° MX--------- 4341 Fulcrum Way NE, Rio Rancho New Mexico 87144 Revised December 8, 2025 8:55 AM Specifications subject to change without notice 7/10 P.: 505.345.0888 |insightlighting.com PROJECT:TYPE:CATALOG #: MEDLEY X PERFORMANCE LINEAR | WHITE LIGHT + STATIC COLORS PENDANT (PNS AND PNM) DIMENSIONS DIM A DIM B 27.13"39.13"51.13"15.13" 16.19"28.19"48.19"52.19" 24"12"36"48"FIXTURE LENGTH 3.25" DIM BO.C. 9.00” MIN48.00” MAX DIM A 3.25" 60° 60° 4X 8-32FASTENERSBY OTHERS 4.0 J-BOXBY OTHERS CANOPY FINISH SG WHITE UNLESSSPECIFIED OTHERWISE DIM B O.C. J-BOX MOUNTINGBRACKETBY OTHERS Ø 5” CANOPY 3.50” TYP. 12.00”FLYINGLEAD DIM BO.C. DIM A DIM BO.C. DIM A MX--------- 4341 Fulcrum Way NE, Rio Rancho New Mexico 87144 Revised December 8, 2025 8:55 AM Specifications subject to change without notice 8/10 P.: 505.345.0888 |insightlighting.com PROJECT:TYPE:CATALOG #: MEDLEY X PERFORMANCE LINEAR | WHITE LIGHT + STATIC COLORS MX----- ROW LENGTH QUANTITY 4' FIXTURES 3' FIXTURES 2' FIXTURES 8'2 9'3 10'2 1 11 '2 1 12'3 13'1 3 14'3 1 15'3 1 16'4 17'3 1 1 18'4 1 19'4 1 20'5 21'4 1 1 22'5 1 23'5 1 24'6 25'5 1 1 26'6 1 27'6 1 28'7 29'6 1 1 30'7 1 31'7 1 32'8 33'7 1 1 34'8 1 35'8 1 36'9 37'8 1 1 38'9 1 39'9 1 40'10 TYPICAL CONTINUOUS RUN LAYOUTS ---- 4341 Fulcrum Way NE, Rio Rancho New Mexico 87144 Revised December 8, 2025 8:55 AM Specifications subject to change without notice 9/10 P.: 505.345.0888 |insightlighting.com PROJECT:TYPE:CATALOG #: MEDLEY X PERFORMANCE LINEAR | WHITE LIGHT + STATIC COLORS MX----- MAXIMUM FIXTURES PER POWER SUPPLY (CIRCUITS MAY NOT BE LOADED OVER 10 AMPS) REMOTE DISTANCE LIMITS Data provided is based on 75% of the Power Supply's total wattage capacity FIXTURE OUTPUT - LOW (3.5W/FT)FIXTURE OUTPUT - MEDIUM (9.0W/FT)FIXTURE OUTPUT - HIGH (15.0W/FT) FIXTURE LENGTH CONTRA LOW POWER 96W CONTRA STANDARD POWER 240W CONTRA HIGH POWER (2)-240W CONTRA LOW POWER 96W CONTRA STANDARD POWER 240W CONTRA HIGH POWER (2)-240W CONTRA LOW POWER 96W CONTRA STANDARD POWER 240W CONTRA HIGH POWER (2)-240W 12"27 68 136 10 26 52 5 14 28 24"13 34 68 5 13 26 2 7 14 36"9 23 46 3 8 16 2 4 8 48"6 17 34 2 6 12 2 3 6 DMX: Standard 96 fixtures per DMX splitter output protocol applies WIRE GUAGE MAXIMUM DISTANCE 20 AWG 25 FT 18 AWG 30 FT 16 AWG 40 FT 14 AWG 60 FT 12 AWG 100 FT ---- 4341 Fulcrum Way NE, Rio Rancho New Mexico 87144 Revised December 8, 2025 8:55 AM Specifications subject to change without notice 10/10 P.: 505.345.0888 |insightlighting.com PROJECT:TYPE:CATALOG #: MEDLEY X PERFORMANCE LINEAR | WHITE LIGHT + STATIC COLORS DIMENSIONS CONTRA EXTERIOR LOW POWER (FOR NON-DIMMING, 0-10V DIMMING AND DMX) MAX WATTAGE: 96W STANDARD WITH FIXTURES: MEDLEY X DESCRIPTION: THIS ENCLOSURE IS INTENDED FOR EXTERIOR USE WITH 90W POWER SUPPLIES.7.00” 5.00”7.00” Ø0.50” IP67 IP68 ANSI C136.3 CONTRA EXTERIOR STANDARD AND HIGH POWER SUPPLY - CES / CEH (0-10V DIMMING, DMX DIMMING) MAX WATTAGE: 240W AND 2 X 240W STANDARD WITH FIXTURES: MEDLEY X DESCRIPTION: THIS ENCLOSURE IS INTENDED FOR EXTERIOR USE WITH 240W, TWO 24W POWER SUPPLIES.14.00” 16.00”8.00” Ø0.33” Ø0.75”IP67 IP68 ANSI C136.3 CONTRA EXTERIOR LOW POWER SUPPLY, LUTRON L3DOE- CELLU (HI-LUME PREMIER 0.1% ECOSYSTEM) 11.82” 14.50”7.36” Ø0.33” Ø0.75”IP67 IP68 ANSI C136.3 MAX WATTAGE: 96W FOR LUTRON L3DOE STANDARD WITH FIXTURES: MEDLEY X DESCRIPTION: THIS ENCLOSURE IS INTENDED FOR EXTERIOR USE MX---------