HomeMy WebLinkAbout23 Cutsheet Corten Steel Panel WESTERN REVEAL°
Horizontal or Vertical Installation.Available in A606-4 (aka Corten°) or Bare Cold Rolled Steel
I�"�� , �l�F��` _ - . . -��r "
, � �
MIX AND MATCH DIFFERENT REVEALS, FACE SIZES, AND WIDTHS
SPECIFICATIONS RECOMMENDATIONS AND CAUTIONS
Material Type:Western Reveal° • A606-4 and Bare Steel performs best in environments
Rib Height: 1.5" with low humidity
Panel Face: 12'; 14", 16'; 18" • Load calculations and load tables DO NOT APPLYTO ANY
A606 OR BARE STEEL PRODUCT.
Panel Reveal: 1'; 2';3'; or No Reveal . A606-4 should not be used with dissimilar metals other
Available Gauges: than stainless steel.This will decrease the lifespan ofthe
• A606-4 (aka Corten°): 22 product.
• Bare Cold Rolled:22 • Screws and clips for A606-4/Corten MUST be stainless
Substrate:A606-4 or Bare Cold Rolled steel.Screw head will be painted brown.
Fasteners:Concealed • Underlayment should be a HIGH TEMPERATURE
Panel Length: 1'to 35' UNDERLAYMENT.
Installation:Over a solid substrate • Not recommended near salt spray environments and
frequent rain locations as it will shorten the life
Material does not arrive pre-rusted.Panel will rust expectancy of the products.
naturallywithexposuretotheweather.Usestainless • Acid washing will degrade steel performance.
steel fasteners with a painted brown screwhead. • Rust runoff will likely stain the surrounding surfaces.
• NO WARRANTIES FORTHESE PRODUCTS
1" Reveal
� . , �.�_ r
�YESTERN REVEAL VANEL l2'�1 0
- ' RV12-1
. 1 ..
� IS'[OVfILWf(1'RFvlY7
vr
.� A� � �
� :� �.i WESTERN REVEAL VANEL 1�'-1.0
" � RV14-1 •
t�•Co'�E�.�ft:1'lMK)
16' � :' �
�i3�
.���:�
� ;
- riESTERN HEVEAI VANEI:(�' .l.
- ' RV16 1 ,
rv,r � �. �.
, • IYCOVfR�Gf(1'NFVFNI
l?
„� ���-' 1'�ESTERN REVEAL VANEI IB'�1 0 � .
� RV18 1 ..
r r .
Western States Metal Roofing I 901 W.Watkins St.,Phoenix,AZ 85007�855-4CORTEN( ) I cortenroofing.com�