HomeMy WebLinkAbout23 Cutsheet Corten Steel PanelWESTERN REVEAL®
Horizontal or Vertical Installation. Available in A606-4 (aka Corten®) or Bare Cold Rolled Steel
MIX AND MATCH DIFFERENT REVEALS, FACE SIZES, AND WIDTHS
SPECIFICATIONS
Material Type: Western Reveal®
Rib Height: 1.5”
Panel Face: 12”, 14”, 16”, 18”
Panel Reveal: 1”, 2”, 3”, or No Reveal
Available Gauges:
•A606-4 (aka Corten®): 22
•Bare Cold Rolled: 22
Substrate: A606-4 or Bare Cold Rolled
Fasteners: Concealed
Panel Length: 1’ to 35’
Installation: Over a solid substrate
RECOMMENDATIONS AND CAUTIONS
•A606-4 and Bare Steel performs best in environments
with low humidity
•Load calculations and load tables DO NOT APPLY TO ANY
A606 OR BARE STEEL PRODUCT.
•A606-4 should not be used with dissimilar metals other
than stainless steel. This will decrease the lifespan of the
product.
•Screws and clips for A606-4/Corten MUST be stainless
steel. Screw head will be painted brown.
•Underlayment should be a HIGH TEMPERATURE
UNDERLAYMENT.
•Not recommended near salt spray environments and
frequent rain locations as it will shorten the life
expectancy of the products.
•Acid washing will degrade steel performance.
•Rust runoff will likely stain the surrounding surfaces.
•NO WARRANTIES FOR THESE PRODUCTS
1” Reveal
Material does not arrive pre-rusted. Panel will rust
naturally with exposure to the weather. Use stainless
steel fasteners with a painted brown screw head.
Western States Metal Roofing | 901 W. Watkins St., Phoenix, AZ 85007 | 855-4CORTEN (855-426-7836) | cortenroofing.com | sales@cortenroofing.com