Loading...
HomeMy WebLinkAbout20 Cutsheet Winco Windowswincowindow.com PRODUCT BROCHURE Features & Custom Options 2” Architectural Grade Thermal Window System Fixed - Projected - Casement Series 1150S Product Overview The 1150S Series has an integral beveled glazing stop allowing pro- filed and flat applied muntin grids to nest inside of the vertical plane of the window. Available in fixed, projected, and casement with an optional blast, ballistic, and impact glazing. The 1150S Series is com- plemented by a full line of trim and accessories. • Azon “Azo-Brader” thermally broken frame and sash, backed by a 10 year warranty against thermal break shrinkage • Various glazing thicknesses available • Vertical and horizontal stacking members • Fully mitered overlap sash configuration with fully sealed corners and dual weather-stripping • Integral extruded beveled glazing leg Performance Data* Type Air (CFM/FT2 @ 6.24 PSF) Water(PSF)Structural(PSF)CRF U-Value(Btu/Hr-Ft²-°F)STC Fixed AW Grade AW-100 Less than 0.10 12 (Higher levels may be available upon request) +/- 150 65 0.27*Contact your local RepProjected AW Grade AP-AW100 Less than 0.10 12 (Higher levels may be available upon request)+/- 150 59*0.39* *U-Value, CRF, Water and AW ratings are based on a particular type of glazing and window configuration being used. They are provided for comparison purposes only. They are based on products of standard configuration, tested in accordance with NFRC/FGIA/AAMA specifications, in a laboratory environment under optimum conditions. Performance values will vary according to project specifications, installation, size, configuration, hardware, glass, etc. Any required field testing should be done in accordance with the project specifications and FGIA/AAMA field testing protocol, not this data. • Optional aluminum extruded screens • Ability to make inside and outside glazed panels within the same mainframe • Wide variety of locking and operating hardware available • Dual glazing with optional integral blinds providing dynamic light control • Accessory line of receptors, mullions, panning and trim for a customized look • Blast, ballistic and impact glazing available Green Commitment Energy Savings Noise Control Blast Shield Historic Replication Wind Protection P: 800-525-8089 Email: sales4@wincowindow.com wincowindow.com TESTING: Our products meet stringent testing requirements of both the American Architectural Manufacturers Association (AAMA) and the National Fenestration Rating Council (NFRC) standards and certification. Winco Window Company 6200 Maple Avenue St Louis, MO 63130 Series 1150S - 2” Architectural Grade Thermal Window System Fixed - Projected - Casement (800) 525-8089 www.wincowindow.com ©WINCO RESERVES THE RIGHT TO MODIFY OR CHANGE INFORMATION WITHINTHIS BOOK WHEN DEEMED NECESSARY FOR PRODUCT IMPROVEMENTWINCO WINDOW COMPANY, INC./ /20211150S 2D 1 2 3 5 1 2 4 5 6 4 3 6 22 1/83 5/162 2 3 5/16 3 3/8TS-4TS-10 Series 1150S Detail Drawings VER: 110625