The URL can be used to link to this page

Home My WebLink About014.1 - Street Light Cut SheetBaxter Meadows (Reference=L92242-1) SPEC20250701_104443_10361_0.DOC.doc 07-01-2025 Page 1 / 6 Qty 1 Luminaire DMS50-55W32LED3K-G3-LE3F-UNV-FAWS-DMG-BKTX Description of Components: Roof: A die cast A360.1 aluminum dome complete with a cast-in technical ring with latch and hinge. The mechanism shall offer tool-free access to the inside of the luminaire. An embedded memory-retentive gasket shall ensure weatherproofing. Housing: In a round shape, this housing is made of cast 356 aluminum, c/w a watertight grommet, mechanically assembled to the bracket with four bolts 3/8-16 UNC. This suspension system permits for a full rotation of the luminaire in 90 degree increments. Light Engine: LEDgine composed of 5 main components: Heat Sink / Lens / LED Module / Optical System / Driver Electrical components are RoHS compliant. Heat Sink: Heat Sink: Made of die cast A360 aluminum optimising the LEDs efficiency and life, complete with a cast in skirt and technical ring. Product does not use any cooling device with moving parts (only passive cooling device) Lens: Made of soda-lime clear tempered flat glass lens, mechanically assembled and sealed onto the lower part of the heat sink. LED Module: Composed of 32 high-performance white LEDs. Color temperature as per ANSI/NEMA bin Warm White, 3000 Kelvin nominal (3045K +/- 175K or 2870K to 3220K), CRI 70 Min. 75 Typical. Optical System: (LE3F), IES type III (asymmetrical). Composed of high-performance optical grade PMMA acrylic refractor lenses to achieve desired distribution optimized to get maximum spacing, target lumens and a superior lighting uniformity. Optical system is rated IP66. Performance shall be tested per LM-63, LM-79 and TM-15 (IESNA) certifying its photometric performance. Street side indicated.0% uplight and U0 per IESNA TM-15. EPA: 1.42 sq ft / weight: 42 lb (19.1 kg) Note: 3D image may not represent color or option selected. Logos above include link, click to access. Baxter Meadows (Reference=L92242-1) SPEC20250701_104443_10361_0.DOC.doc 07-01-2025 Page 2 / 6 Driver: High power factor of 90% minimum. Electronic driver, operating range 50/60 Hz. Auto-adjusting universal voltage input from 120 to 277 VAC rated for both application line to line or line to neutral, Class 1, THD of 20% max. Maximum ambient operating temperature from -40F(-40C) to 130F(55C) degrees. Driver comes with dimming compatible 0-10 volts. The current supplying the LEDs will be reduced by the driver if the driver experiences internal overheating as a protection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and current overload. Automatic recovery after correction. Driver Options: (DMG), Dimming compatible 0-10 volts. For applicable warranty, certification and operation guide see Lumec dimmable luminaire specification document for unapproved device installed by other. To get document, click on this link: Specification document or go on web site on this address: https://www.signify.com/b-dam/signify/en-us/brands/lumec/Lumec-un-approved-control-device-installed-by-others-7_d.pdf Surge Protector: Integrated Feature, Surge protector tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C62.41.2 Scenario I Category C High Exposure 10kV/10kA waveforms for Line-Ground, Line-Neutral and Neutral-Ground, and in accordance with U.S. DOE (Department of Energy) MSSLC (Municipal Solid-State Street Lighting Consortium) model specification for LED roadway luminaires electrical immunity requirements for High Test Level 10kV/10kA. Baxter Meadows (Reference=L92242-1) SPEC20250701_104443_10361_0.DOC.doc 07-01-2025 Page 3 / 6 Configuration Qty 1 Bracket OM-1A-BKTX Description of Components: Arm: Shall be made from two 6061-T6 aluminum tubes, 1 5/8" (41mm) outside diameter, welded. Central Adaptor: Made of aluminum 6061-T6, 4" (102mm) outside diameter, complete with a tenon penetrating 12" (305mm) inside the pole. The tenon shall be mechanically fastened to the pole by two sets of three set-screws at 120 degrees around the pole. Bracket Properties (Weight and EPA): 18 lbs (8.2 kg), 1.83 ft² Baxter Meadows (Reference=L92242-1) SPEC20250701_104443_10361_0.DOC.doc 07-01-2025 Page 4 / 6 Description of Components: Pole Shaft: Shall be made from a 4" (102mm) round high tensile carbon steel tubing, having a 0.125" (3.2mm) wall thickness, welded to the pole base. Joint Cover: Two-piece round joint cover made from cast 356 aluminum, mechanically fastened with stainless steel screws. Pole Base: Shall be made from a 6 5/8" (168mm) round high tensile carbon steel tubing base having a 0.180" (4.6mm) wall thickness, welded to both the bottom and top of the anchor plate. Maintenance Opening: The pole shall have a 4 1/2" x 10" (114mm x 254mm) maintenance opening centered 21" (533mm) from the bottom of the anchor plate, complete with a weatherproof embossed aluminum cover and a copper ground lug. Base Cover: Two piece round base cover made from cast 356 aluminum, mechanically fastened with stainless steel screws. Note: A tenon will be provided when the luminaire or bracket does not fit directly on pole shaft. Tenon not shown on the drawing. IMPORTANT: Lumec strongly recommends the installation of the complete lighting assembly with all of its accessories upon the anchoring of the pole. This will ensure that the structural integrity of the product is maintained throughout its lifetime. Pole Weight: 109 lbs (49.5 kg) Qty 1 Pole SM6F-18-BKTX Comes with 4 steel anchor bolts, 3/4" X 24" + 3" J Type Bolts, 8 nuts and 8 washers. Important: Do not obstruct space between anchor plate and concrete base. -Bolt Circle: 10 1/2" (267mm) - Thickness: 3/4"(19mm) - NOTE: Bolt Circle Allowed: 9" to 11" 229mm to 279mm Base & Bolts Information Anchor Plate Free opening Baxter Meadows (Reference=L92242-1) SPEC20250701_104443_10361_0.DOC.doc 07-01-2025 Page 5 / 6 Description of Components: Wiring: Gauge (#14) TEW/AWM 1015 or 1230 wires, 6" (152mm) minimum exceeding top of the bracket. Hardware: All exposed screws shall be complete with Ceramic primer-seal basecoat to reduce seizing of the parts and offers a high resistance to corrosion. All seals and sealing devices are made and/or lined with EPDM and/or silicone and/or rubber. Anchor Bolts: Anchor bolts made of ASTM F1554 grade 55 steel with a minimum yield strength of 55,000 psi. Nuts made of ASTM F1554-99 grade A steel or better. The thread adjustment is ANSI class 2B regardless of the diameter of the bolts. Washers made of ASTM grade F-844 steel or better. All galvanized parts are hot-dip galvanized with minimum requirement the ACNOR G-164 standard. Finish: Color to be black textured RAL9005TX (BKTX) and in accordance with the AAMA 2603 standard. Application of polyester powder coat paint (4 mils/100 microns) with ± 1 mils/24 microns of tolerance. The Thermosetting resins provides a discoloration resistant finish in accordance with the ASTM D2244 standard, as well as luster retention in keeping with the ASTM D523 standard and humidity proof in accordance with the ASTM D2247 standard. The surface treatment achieves a minimum of 2000 hours for salt spray resistant finish in accordance with testing performed and per ASTM B117 standard. LED products manufacturing standard: The electronic components sensitive to electrostatic discharge (ESD) such as light emitting diodes (LEDs) are assembled in compliance with IEC61340-5-1 and ANSI/ESD S20.20 standards so as to eliminate ESD events that could decrease the useful life of the product. Quality Control: The manufacturer must provide a written confirmation of its ISO 9001 and ISO 14001 International Quality Standards Certification. Vibration Resistance: The DMS50 meets the ANSI C136.31, 2010, American National Standard for Roadway Luminaire Vibration specifications for Bridge/overpass applications. (Tested for 3G over 100 000 cycles) Mechanical resistance: This design information is intended as a general guideline only. The customer is solely responsible for proper selection of pole, luminaire, accessories and foundation under the given site conditions and intended usage. The addition of any other item to the pole may dramatically impact the wind load on that pole. It is strongly recommended that a qualified professional be consulted to analyze the loads given the user’s specific needs to ensure proper selection of the pole, luminaire, accessories, and foundation. Lumec assumes no responsibility for such complete analysis or product selection. Failure to ensure proper site analysis, pole selection, loads and installation can result in pole failure, leading to serious injury or property damage. Web site information details: / cULus Certification / CSA Pole Certification Miscellaneous Baxter Meadows (Reference=L92242-1) SPEC20250701_104443_10361_0.DOC.doc 07-01-2025 Page 6 / 6