Loading...
HomeMy WebLinkAboutPhotometric_003_091421Page 1/9 Rev. 05/25/21 BEA-VIPER-L-SPEC © 2021 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com FEATURES • Large size companion to Viper Small • Wide choice of different LED wattage configurations • Ten optical distributions • Designed to replace HID lighting up to 1000W MH or HPS • Suitable for wet locations  Photometry Viper Brochure Dimensional Drawings ENERGENI SiteSync VIPER L LARGE VIPER LUMINAIRE DATE:LOCATION: TYPE:PROJECT: CONSTRUCTION • Manufactured with die cast aluminum • Coated with a polyester finish that meets ASTM B117 corrosion test requirements and ASTM D522 cracking and loss of adhesion test requirements • IFS polyester powder-coat electrostatically applied and thermocured. IFS finish consists of a five stage pretreatment regimen with a polymer primer sealer and top coated with a thermoset super TGIC polyester powder coat finish • The finish meets the AAMA 2604 performance specification which includes passing a 3,000-hour salt spray test for corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists surface impacts of up to 160 inch-pounds • External hardware is corrosion resistant OPTICS • Cartridge is held together with internal brass standoffs soldered to the board so that it can be field replaced as a one-piece optical system • One-piece silicone gasket ensures a weatherproof seal around each individual optic • One-piece optical cartridge system consisting of an LED engine, optics, gasket and stainless steel bezel INSTALLATION • Mounting options for horizontal arm, vertical tenon or traditional arm mounting available. Mounting hardware included ELECTRICAL • Luminaire accepts 100V through 277V, 347V or 480V input 50 Hz to 60 Hz (UNV) • Power factor is ≥ .90 at full load • Surge protection: 20kA • Fixture electrical compartment contains all LED driver components CONTROLS (CONTINUED) • In addition, Viper can be specified with SiteSync™ wireless control system for reduction in energy and maintenance costs while optimizing light quality 24/7 CERTIFICATIONS • DLC® (DesignLights Consortium) Qualified. Please refer to the DLC website for specific product qualifications at www.designlights.org • Certified to UL 1598 and UL 8750 • 3G rated for ANSI C136.31 high vibration applications with MAF mounting • IDA approved • This product is approved by the Florida Fish and Wildlife Conservation Commission. Separate spec available online • This product qualifies as a “designated country construction material” per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 06/03/2020. See Buy American Solutions. WARRANTY • 5 year warranty • See HLI Commercial and Industrial Outdoor Lighting Warranty for additional information SPECIFICATIONS ELECTRICAL (CONTINUED) • Dimming Drivers are standard and dimming leads are extended out of the luminaire unless control options require connection to the dimming leads. Must specify if wiring leads are to be greater than the 6” standard. • Component-to-component wiring within the luminaire may carry no more than 80% of rated load and is certified by UL for use at 600VAC at 90°C or higher • Plug disconnects are certified by UL for use at 600 VAC, 13A or higher. 13A rating applies to primary (AC) side only • Optional 7-pin ANSI C136.41-2013 Twist- Lock® photo control receptacle available. Compatible with ANSI C136.41 external wireless control devices • Ambient operating temperature -40°C to 25°C • Lifeshield™ Circuit (see Electrical Data) CONTROLS • Available with an optional passive infrared (PIR) motion sensor capable of detecting motion 360° around the luminaire. When no motion is detected for the specified time, the motion response system reduces the wattage to factory preset level, reducing the light level accordingly. When motion is detected by the PIR sensor, the luminaire returns to full wattage and full light output. Please contact Beacon Products if project requirements vary from standard configuration • Available with Energeni for optional set dimming, timed dimming with simple delay, or timed dimming based on time of night • Please consult brand or sales representative when combining control and electrical options as some combinations may not operate as anticipated depending on your application. KEY DATA Lumen Range 14,283–39,969 Wattage Range 64–395 Efficacy Range (LPW)98–135 Reported Life (Hours)L70>60,000 Input Current Range (Amps)0.3–4.0 CONTROL TECHNOLOGY CATALOG #:  Viper Small *3000K and warmer CCTs only ™ OPTICS RELATED PRODUCTS See Certification Specifications BUY AMERICANSOLUTIONS See Certification Specifications BUY AMERICANSOLUTIONS VIPER L LARGE VIPER LUMINAIRE Page 2/9 Rev. 05/25/21 BEA-VIPER-L-SPEC © 2021 Beacon Products, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Boulevard • Greenville, SC 29607 / Tel 864.678.1000 / Website www.beaconproducts.com ORDERING GUIDE VPL –––––– Series LED Engine CCT/CRI7 Distribution Rotation Voltage VPL Viper Large 64L-135 135W LED array  80L-180 180W LED array  80L-235 235W LED array 96L-220 220W LED array 96L-280 280W LED array 96L-315 315W LED array 96L-395 395W LED array 3K7 3000K, 70 CRI 4K7 4000K, 70 CRI 5K7 5000K, 70 CRI FR Type 1/Front Row 2 Type 2 3 Type 3 4F (formerly 4)Type 4 4W Type 4 Wide 5QM Type 5QM 5QN Type 5QN 5R Type 5R (rectangular) 5W Type 5W (round wide) TC Tennis Court CR Corner Right CL Corner Left Blank No rotation L Optic rotation left5 R Optic rotation right5 UNV 120–277V 347 347V 480 480V ––– Mounting Color Control Options Network Options A Rectangular Arm (formerly RA) for square or round pole MAF Mast Arm Fitter (formerly SF2) for 23/8" OD horizontal arm K Knuckle (formerly PK2) limit to 30° tilt or 23/8" OD horizontal arm or vertical tenon WB Wall Bracket AD Universal Arm for square pole AD3 Universal Arm with adapter for 2.4"–4.1" round pole AD4 Universal Arm with adapter for 4.2"–5.3" round pole AD5 Universal Arm with adapter for 5.5"–5.9" round pole AD6 Universal Arm with adapter for 6.0"–6.5" round pole BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Brone Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color NXWE NX Wireless Enabled (module + radio) NXSPW_F Nx Wireless, PIR Occ. Sensor, Daylight Havesting2 NXSP_F NX, PIR Occ. Sensor, Daylight Harvesting2 WIR Wireless Controls, wiSCAPE Control Options 7PR 7-Pin Receptacle only (shorting cap, photo control, or wireless control provided by others) 7PR-SC 7-Pin Receptacle w/Shorting Cap 7PR-TL 7-Pin Receptacle w/Twist-Lock® photo control SCP/_F Programmable Occupancy Sensor w/ daylight control1,2,6 GENI-XX ENERGENI3 SWP SiteSync Pre-Commission1,4 SWPM_F SiteSync Pre-Commission w/ Sensor1,2, 4 BC Backsheid (available for FR, 2, 3, 4, 4W Optics) CD Continuous Dimming F Fusing TB Terminal Block Example: VPL–96L–280–4K7–4W–UNV–A–DBT–GENI–04–BC CATALOG # DATE:LOCATION: TYPE:PROJECT: House Side Shield Accessories HSS/EVP-L/90-FB/XXX 90° shield front or back HSS/EVP-L/90-LR/XXX 90° shield left or right HSS/EVP-L/270-FB/XXX 270° shield front or back HSS/EVP-L/270-LR/XXX 270° shield left or right HSS/EVP-L/360/XXX Full shield Replace XXX with notation for desired finish color. Refer to page 8 for shield images. Mounting Accessories VPL-AD-RPA3 2.4"–4.1" Round Pole Adapter for AD arm VPL-AD-RPA4 4.2"–5.3" Round Pole Adapter for AD arm VPL-AD-RPA5 5.5"–5.9" Round Pole Adapter for AD arm VPL-AD-RPA6 6.0"–6.5" Round Pole Adapter for AD arm Notes: 1 Not available with other wireless control or sensor options 2 Specify mounting height; 8 = 8’ or less, 40 = 14’ to 40’ 3 Specify routine setting code (example GENI-04). See ENERGENI brochure and instructions for setting table and options. Not available with sensor or SiteSync options 4 Specify group and zone at time of order. See www.hubbelllighting.com/sitesync for further details. Order at least one SiteSync interface accessory SWUSB or SWTAB. Each option contains SiteSync License, GUI, and Bridge Node 5 Only available with FR, 2, 3, 4, 4W and 5R distributions 6 Order at least one SCP-REMOTE per project location to program and control the occupancy sensor CATALOG #: Accessories and Services (Ordered Separately) SCP-REMOTE Remote Control for SCP/_F option. Order at least one per project to program and control the occupancy sensor SWUSB*SiteSync interface software loaded on USB flash drive for use with owner supplied PC (Windows based only). Includes SiteSync license, software and USB radio bridge node SWTAB*Windows tablet and SiteSync interface software. Includes tablet with preloaded software, SiteSync license and USB radio bridge node SWBRG SiteSync USB radio bridge node only. Order if a replacement is required or if an extra bridge node is requested SW7PR+SiteSync 7-Pin on fixture module On/Off/Dim, Daylight Sensor 120–480VAC BIRD-SPIKE-4 Bird Spikes * When ordering SiteSync at least one of these two interface options must be ordered per project. + Available as a SiteSync retrofit solution for fixtures with an existing 7-pin receptacle. Hubbell Control Solutions — Accessories (Sold Separately) NX Distributed Intelligence™ NXOFM-1R1D-UNV On-fixture Module (7-pin), On / Off / Dim, Daylight Sensor with HubbNET Radio and Bluetooth® Radio, 120–480VAC wiSCAPE® Lighting Control WIR-RME-L On-fixture Module (7-pin or 5-pin), On / Off / Dim, Daylight Sensor with wiSCAPE Radio, 110–480VAC  For additional information related to these accessories please visit www.hubbellcontrolsolutions.com. Options provided for use with integrated sensor, please view specification sheet ordering information table for details.