Loading...
HomeMy WebLinkAbout19_Fixture WP1Introduction The WDGE LED family is designed to meet specifier’s every wall-mounted lighting need in a widely accepted shape that blends with any architecture. The clean rectilinear design comes in four sizes with lumen packages ranging from 1,200 to 25,000 lumens, providing true site-wide solution. WDGE1 delivers up to 2,000 lumens with a soft, non-pixelated light source, creating a visually comfortable environment. The compact size of WDGE1, with its integrated emergency battery backup option, makes it an ideal over-the-door wall-mounted lighting solution. NOTES 1 50K not available in 90CRI. 2 347V not available with E4WH, DS or PE. 3 E4WH not available with PE or DS. 4 PE not available with DS. 5 Not qualified for DLC. Not available with E4WH. One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. WDGE1 LED Rev. 11/21/22COMMERCIAL OUTDOOR WDGE1 LED Architectural Wall Sconce Catalog Number Notes Type Depth (D1):5.5" Depth (D2):1.5" Height:8" Width:9" Weight: (without options)9 lbs Hit the Tab key or mouse over the page to see all interactive elements. Specifications Series Package Color Temperature CRI Distribution Voltage Mounting WDGE1 LED P1 P2 27K 2700K 30K 3000K 35K 3500K 40K 4000K 50K 1 5000K 80CRI 90CRI VF Visual comfort forward throw VW Visual comfort wide MVOLT 347 2 Shipped included SRM Surface mounting bracket ICW Indirect Canopy/Ceiling Washer bracket (dry/damp locations only)5 Shipped separately AWS 3/8inch Architectural wall spacer PBBW Surface-mounted back box (top, left, right conduit entry) Use when there is no junction box available. Options Finish E4WH 3 Emergency battery backup, Certified in CA Title 20 MAEDBS (4W, 0°C min) PE 4 Photocell, Button Type DS Dual switching (comes with 2 drivers and 2 light engines; see page 3 for details) DMG 0-10V dimming wires pulled outside fixture (for use with an external control, ordered separately) BCE Bottom conduit entry for back box (PBBW). Total of 4 entry points. BAA Buy America(n) Act Compliant DDBXD Dark bronze DBLXD Black DNAXD Natural aluminum DWHXD White DSSXD Sandstone DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natural aluminum DWHGXD Textured white DSSTXD Textured sandstone Ordering Information EXAMPLE: WDGE1 LED P2 40K 80CRI VF MVOLT SRM PE DDBXD Luminaire Standard EM, 0°C Cold EM, -20°C Sensor Lumens (4000K) P1 P2 P3 P4 P5 P6 WDGE1 LED 4W ----1,200 2,000 -------- WDGE2 LED 10W 18W Standalone / nLight 1,200 2,000 3,000 4,500 6,000 -- WDGE3 LED 15W 18W Standalone / nLight 7,500 8,500 10,000 12,000 ---- WDGE4 LED ----Standalone / nLight 12,000 16,000 18,000 20,000 22,000 25,000 WDGE LED Family Overview D1W D2 H Accessories Ordered and shipped separately. WDGEAWS DDBXD WDGE 3/8inch Architectural Wall Spacer (specify finish) WDGE1PBBW DDBXD U WDGE1 surface-mounted back box (specify finish) Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here. Performance Package System Watts Dist. Type 27K (2700K, 80 CRI)30K (3000K, 80 CRI)35K (3500K, 80 CRI)40K (4000K, 80 CRI)50K (5000K, 80 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G P1 10W VF 1,120 112 0 0 0 1,161 116 0 0 0 1,194 119 0 0 0 1,227 123 0 0 0 1,235 123 0 0 0 VW 1,122 112 0 0 0 1,163 116 0 0 0 1,196 120 0 0 0 1,229 123 0 0 0 1,237 124 0 0 0 P2 15W VF 1,806 120 1 0 0 1,872 125 1 0 0 1,925 128 1 0 0 1,978 132 1 0 0 1,992 133 1 0 0 VW 1,809 120 1 0 0 1,876 125 1 0 0 1,929 128 1 0 0 1,982 132 1 0 0 1,996 133 1 0 0 Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). Lumen Ambient Temperature (LAT) Multipliers One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. WDGE1 LED Rev. 11/21/22COMMERCIAL OUTDOOR Performance Data Lumen Output Ambient Lumen Multiplier 0°C 32°F 1.03 10°C 50°F 1.02 20°C 68°F 1.01 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 Projected LED Lumen Maintenance Data references the extrapolated performance projections for the platforms noted in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM-80-08 and projected per IESNA TM-21-11). To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. Operating Hours 0 25,000 50,000 100,000 Lumen Maintenance Factor 1.0 >0.96 >0.95 >0.91 Performance Package System Watts Current (A) 120V 208V 240V 277V 347V P1 10W 0.082 0.049 0.043 0.038 -- 13W --------0.046 P2 15W 0.132 0.081 0.072 0.064 -- 18W --------0.056 Electrical Load CCT Multiplier 27K 0.845 30K 0.867 35K 0.845 40K 0.885 50K 0.898 Lumen Multiplier for 90CRI Option Dist. Type Lumens E4WH VF 646 VW 647 Lumen Output in Emergency Mode (4000K, 80 CRI) 1.0 fc avg. 8' 15' 26' 0.1 fc min. 8' MH To see complete photometric reports or download .ies files for this product, visit the Lithonia Lighting WDGE LED homepage. Tested in accordance with IESNA LM-79 and LM-80 standards. One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. WDGE1 LED Rev. 11/21/22COMMERCIAL OUTDOOR Photometric Diagrams LEGEND 0.25 fc 0.5 fc 3.0 fc 1.0 fc WDGE1 LED P2 40K 80CRI VWWDGE1 LED P2 40K 80CRI VW MH = 8ft Grid = 8ft x 8ft The emergency battery backup is integral to the luminaire — no external housing required! This design provides reliable emergency operation while maintaining the aesthetics of the product. All emergency battery backup configurations include an independent secondary driver with an integral relay to immediately detect loss of normal power and automatically energize the luminaire. The emergency battery will power the luminaire for a minimum duration of 90 minutes (maximum duration of three hours) from the time normal power is lost and maintain a minimum of 60% of the light output at the end of 90minutes. Applicable codes: NFPA 70/NEC – section 700.16, NFPA 101 Life Safety Code Section 7.9 The example below shows illuminance of 1 fc average and 0.1 fc minimum in emergency mode with E4WH and VF distribution. Emergency Egress Options Emergency Battery Backup The dual switching option offers operational redundancy that certain codes require. With this option the luminaire comes integrated with two drivers and two light engines. These work completely independent to each other so that a failure of any individual component does not cause the whole luminaire to go dark. This option is typically used with a back generator or inverter providing emergency power. Applicable codes: NFPA 70/NEC – section 700.16, NFPA 101 Life Safety Code Section 7.9 Dual Switching (DS) Option WDGE1 LED xx 40K 80CRI VF MVOLT E4WH Grid = 10ft x 10ft Driver1 Driver2 WDGE1 LED P2 40K 80CRI VFWDGE1 LED P2 40K 80CRI VF One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. WDGE1 LED Rev. 11/21/22COMMERCIAL OUTDOOR FEATURES & SPECIFICATIONS INTENDED USE Common architectural look, with clean rectilinear shape, of the WDGE LED was designed to blend with any type of construction, whether it be tilt-up, frame or brick. Applications include commercial offices, warehouses, hospitals, schools, malls, restaurants, and other commercial buildings. CONSTRUCTION The single-piece die-cast aluminum housing integrates secondary heat sinks to optimize thermal transfer from the internal light engine heat sinks and promote long life. The driver is mounted in direct contact with the casting for a low operating temperature and long life. The die-cast door frame is fully gasketed with a one-piece solid silicone gasket to keep out moisture and dust, providing an IP66 rating for the luminaire. FINISH Exterior painted parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Standard Super Durable colors include dark bronze, black, natural aluminum, sandstone and white. Available in textured and non-textured finishes. OPTICS Well crafted reflector optics allow the light engine to be recessed within the luminaire, providing visual comfort, superior distribution, uniformity, and spacing in wall-mount applications. The WDGE LED has zero uplight and qualifies as a Nighttime Friendly™ product, meaning it is consistent with the LEED® and Green Globes™ criteria for eliminating wasteful uplight. ELECTRICAL Light engine consists of high-efficacy LEDs mounted to metal-core circuit boards to maximize heat dissipation and promote long life (up to L91/100,000 hours at 25°C). The electronic driver has a power factor of >90%, THD <20%. Luminaire comes with built in 6kV surge protection, which meets a minimum Category C low exposure (per ANSI/IEEE C62.41.2). Fixture ships standard with 0-10v dimmable driver. INSTALLATION A universal mounting plate with integral mounting support arms allows the fixture to hinge down for easy access while making wiring connections. The 3/8” Architectural Wall Spacer (AWS) can be used to create a floating appearance or to accommodate small imperfections in the wall surface. The ICW option can be used to mount the luminaire inverted for indirect lighting in dry and damp locations. Design can withstand up to a 1.5 G vibration load rating per ANSI C136.31. LISTINGS CSA certified to U.S. and Canadian standards. Luminaire is IP66 rated. PIR options are rated for wet location. Rated for -40°C minimum ambient. DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified. International Dark- Sky Association (IDA) Fixture Seal of Approval (FSA) is available for all products on this page utilizing 2700K and 3000K color temperature only and SRM mounting only. BUY AMERICAN ACT Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please refer to www.acuitybrands.com/buy-american for additional information. WARRANTY 5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. Mounting, Options & Accessories D = 5.5" H = 8" W = 9" E4WH – 4W Emergency Battery Backup D = 1.75" H = 8" W = 9" PBBW – Surface-Mounted Back Box Use when there is no junction box available. D = 0.38" H = 4.4" W = 7.5" AWS – 3/8inch Architectural Wall Spacer