HomeMy WebLinkAbout02 SP Site Plan ChecklistSP
SITE PLAN CHECKLIST
HARD COPY FORMATTING SUBMITTAL
1. Two sets of 11” x 17” or 12” x 18” that include two copies of every item below bound or folded into 8.5”x11” or 8.5”x14. Fold
11” x 17” or 12” x 18” plans in half, then fold the right half back on itself at a 45 degree angle in order to accommodate a two
hole punch at the top. Plans must be accessible to be unfolded when bound in a two hole file. 24” x 36” sets aren’t required
until final adequacy determined.
2. Sets must be bound and two hole punched at the top of the page. Three ring binders with hole punch are not accepted.
3. Application sets should be organized and collated in the following general order 1) cover sheet/routing sheet; 2) applications
and checklists; 3) narratives/responses/photographs; 4) plans; 5) legal docs: CC&R’s, easements, deeds, agreements, cash-in-
lieu (CIL) water rights, etc.; 6) appendices: standalone technical reports.
4. Separate cut sheets, exhibits, and summary tables on 8 1/2” by 11” will not be accepted. The only exception is for project
narratives, property owners’ association documents, SID documents, easements, agreements, maintenance plans, water
rights information, payback district information, contracts, deeds, weed plans, and standalone technical reports such as traffic
studies, wetland reports, sewer and water reports, environmental, etc.
SITE PLAN REQUIREMENTS
This handout provides details for application requirements outlined in the project checklists. If these requirements are met, it will
minimize delays that can occur when an application is disorganized, incomplete or not formatted correctly. These requirements are
mandatory per BMC 38.220.
APPLICATION SET
1. Complete and signed development review application Form A1.
2. Project narrative describing the project type, proposed use scope, size (dwellings, building size(s), building height(s), number
of buildings, number of total parking spaces) intent, and phasing, if applicable. The narrative must include a response to the
City’s conceptual review comments. If requesting a waiver from conceptual review, a letter from the director must be included.
3. Complete and signed property adjoiners certificate Form N1 and materials.
4. For departures, a departure narrative must be provided stating which Section(s) of the Bozeman Municipal Code are proposed
for departure, the scope and extent of the proposed departure(s) and a response to the required departure criteria. A
summary and response to the criteria must be provided for each departure.
a. Project applicants must successfully demonstrate to the review authority how the proposed departure meets the
purpose(s) of the standard and other applicable departure criteria that apply to the specific standard.
b. Either through a separate exhibit of departure request within the narrative or through a site plan or building elevation,
clearly show any proposed departure related to the request. Ensure that the separate sheet number is referenced in the
departure narrative.
5. Traffic study. Street, traffic, and access information required in Section 38.220.060.A.12, BMC or a waiver, in writing, from the
Engineering Division that the requirement is waived prior to application submittal.
6. Water rights information. If cash-in-lieu is proposed a cash-in-lieu of water rights calculation and payment amount certified by
the City’s Engineering Division.
DIGITAL COPIES AND NAMING PROTOCOL
1. The digital copies must be separated into three categories: Documents, Plans and Appendices.
2. One digital version of all materials (JPEG or PDF) on separate CD or USB drive labeled. No individual files will be accepted that
are larger than 5 MB. Files that are larger must be broken down into smaller files.
3. Naming protocol. Each individual document or plan sheet must have a proper name and date. For example a document might
be labeled “A1 Development Review application 05-01-2017” or “City Parkland Deed 05-01-17.” Plan sheets are required to be
listed individually. For example a plan sheet might be labeled “A300 Floor Plan levels 1 and 2 05-01-2017” or “PM Photometric
Plan 05-01-17.” Do not include other tab, section or other references in the digital file names.
Site Plan Checklist Page 1 of 7 Revision Date: June 2020
SITE PLAN CHECKLIST
7. If water wells are proposed, a letter is required from the Montana Department of Natural Resources and Conservation
confirming their intent to issue a permit or exemption.
8. Stormwater Design Report.
9. Digital copy(ies) of most current plat and existing easements if recorded separately from the plat.
10. If the property is located within the Neighborhood Conservation Overlay District (NCOD), include Commercial Certificate of
Appropriateness (CCOA) or Demolition (DEM) applications and required materials.
a. You may only apply for deviations in conjunction with a development proposal. Standards and criteria for deviations are
contained in Section 38.340, BMC.
i. Either through a site plan or separate exhibit, clearly show any proposed deviations related to site requirements such as
yards/setbacks, lot coverage, parking or other applicable standards. Ensure that the separate sheet number is referenced
if it is within the plan sheet.
ii. Either through the building elevation or separate exhibit clearly show any proposed deviations related to building
construction such as height, second story additions, or other applicable standards.
11. Affordable Housing:
a. Describe how the site plan will satisfy any requirements of Section 38.380, BMC which have either been established
for that lot(s) through the subdivision process or if no subdivision has previously occurred are applicable to a site plan. The
description shall contain adequate detail to clearly identify those lots and dwellings designated as subject to the section’s
compliance requirements and to make the obligations placed on the affected lots and dwellings readily understandable. If
affordable housing is not being provided state that on the site plan sheets with the site data.
b. If affordable housing is provided, or cash in lieu is proposed, use the Affordable Housing (AH) form.
GENERAL PLAN REQUIREMENTS FOR EACH PLAN SHEET LISTED BELOW
1. Use a conventional scale such as 1:20 or 1/4:1.
2. Plans/drawings must not contain disclaimers such as “Not to Scale” or “Preliminary” and “Not for Construction”.
3. Boundary line of property with dimensions annotated on plans/drawings. Ensure lot line is shown in a heavy, solid line.
4. Title Box Requirements: drawing name, sheet name, date. If new sheets are updated or revised, a new date must be applied to
the sheet.
5. Legend.
6. Compass rose or an arrow indicating which direction is north.
7. Building location.
8. Ingress and egress points.
9. Approximate centerlines of existing watercourses, required watercourse setbacks, and the location of any 100-year floodplain
10. The approximate location of significant drainage features.
11. The location and size of existing and proposed streets and alleys, utility easements, utility lines, driveways and sidewalks on the
lot and/or adjacent to the lot.
12. Location and extent of street vision triangles extended to the center of the right-of-way including adjacent street intersections
and all alley and driveway access points.
13. Location and extent of snow storage areas.
PLAN SHEETS
The intent of the plan sheets is to depict all the required site information in a clear manner and to not have overly congested
plans. The plans listed below are categorized based on the type of information that must be displayed on each sheet. Depending
on the scale and complexity of the project, we recommend that each plan be split up into the categories listed below on individual
plan sheets if the a plan becomes congested when trying to accommodate all of the required information. When in doubt, produce
an extra sheet that separates the information.
Site Plan Checklist Page 2 of 7 Revision Date: June 2020
SITE PLAN CHECKLIST
COVER SHEET REQUIREMENTS
1. Name of project/development.
2. Name and mailing address of developer and owner.
3. Name and mailing address of applicant team (i.e. engineer, architect, planner, landscape architect, etc.).
4. Location of project/development by street address and legal description.
5. Location/vicinity map, including the area within one-half mile of the site and zoning labeled.
6. Legal Description with metes and bounds format; include the lot, block and subdivision name.
7. Table of contents. If revisions are required, the title sheet and table of contents must be updated to reflect all revised sheets
with new dates.
8. Parcel and site coverage information:
a. Zoning district, community plan designation
b. Parcel size(s) in gross acres and square feet
c. Parking table, how much is required and how much is provided
d. Open space calculations (if applicable)
e. Parkland requirements (if applicable). See parkland requirements below.
f. Density and floor area ratio breakdown. If residential, must be presented as net residential density.
g. Location, percentage of parcel and total site, and square footage for the following:
i. Existing and proposed buildings and structures
ii. Driveway circulation and parking areas
iii. Semipublic land areas such as recreational, open space, and landscape areas
iv. Public street right-of-way
9. Location of City limit boundaries, and boundaries of Gallatin County’s Bozeman Area Zoning Jurisdiction, within or near the
development.
10. ADA certification block.
14. Fire lanes and signage.
15. Location of trash enclosures.
16. Phasing lines as applicable.
Site Plan Checklist Page 3 of 7 Revision Date: June 2020
GENERAL CIVIL PLAN
The general civil plan and utility plan can be combined as long as the plans are not overly congested. The grading and drainage
plan must be its own separate plan sheet.
1. Overall plan with no contours. Sheet must be stamped and signed by a licensed Montana Professional Engineer.
2. Surface retention/detention pond perimeters labeled.
3. Street and site lighting.
4. Adjacent streets to a distance of 150 feet, except for sites adjacent to major arterial streets where the distances shall be 200
feet. Include full width of the street with curb, gutter, sidewalk, drive approaches, intersections and street lighting on both
sides of the street.
5. Traffic flow on and off site.
6. Construction route map showing construction entrance location and how materials and heavy equipment will travel to and
from the site.
7. Construction management plan including exterior construction period material staging, spoils location and construction trash
enclosure location(s). A trash container type must be provided and detailed (40 yard roll off, fenced enclosure, etc.). If spoils
storage is proposed a timeline for removal must be provided.
SITE PLAN CHECKLIST
GRADING AND DRAINAGE PLAN
1. Topographic contours at a minimum internal of 2 feet, or as determined by the Director. Include sufficient spot elevations and
slope arrows.
2. On-site retention/detention location, include size, volume and relevant elevations
3. Invert elevations for all stormwater conveyance infrastructure including pipes, control structure, overflows, curb chase, etc.
4. Water quality improvement facilities.
5. Surface stormwater facilities must demonstrate compliance with Section 38.410.080, BMC including cross sections for each
facility.
6. Significant rock outcroppings, slopes of greater than 15 percent or other significant topographic features.
7. Designate drainage and waterway related items, including all drainage ways, streets, arroyos, dry gullies, diversion ditches,
spillways, reservoirs, etc. which may be incorporated into the storm drainage system. Include the name of the drainage way
(where appropriate), the downstream conditions, and any downstream restrictions.
8. Surface water, including:
a. Ponds, streams and irrigation ditches (include classifications based upon a determination of the Gallatin Conservation
District; note classification of each feature on plans).
b. Watercourses, water bodies and wetlands (include classifications based upon a determination of the Gallatin Conservation
District, Army Corps of Engineers, or Wetland Delineation Report; note classification of each feature on plans). Include
dimensions of watercourse setbacks including Zones 1 and 2.
c. Floodplains as designated on the Federal Insurance Rate Map or that may otherwise be identified as lying within a 100
year floodplain through additional floodplain delineation, engineering analysis, topographic survey or other objective and
factual basis.
d. The flood hazard area(s) as identified with a floodplain analysis report in compliance with Article 6, BMC, if required.
Site Plan Checklist Page 4 of 7 Revision Date: June 2020
UTILITY PLAN
1. Utility and utility right-of-way and easements, existing and proposed with plat book and document numbers. Include:
a. Electric
b. Natural gas
c. Telephone, cable, optic fiber and similar utilities
d. Water mains and services, including fire services
e. Sanitary sewer
f. Storm sewer
2. Existing utilities and connections to be abandoned and/or removed (water and sewer).
3. Fire hydrant locations.
4. Size, location and material type of existing and proposed sewer, water and storm drain pipe.
5. Proposed water meter location and size.
6. Above ground utilities including poles, cabinets, boxes, manholes, pullboxes, etc.
7. Show and label required grease and/or sand/oil interceptors.
8. Show and label the location(s) of proposed gas and electric meters per standards.
9. Dimensional mechanical rooms to verify water service lay lengths meet minimum requirements.
SITE PLAN
1. The location, identification and dimensions of existing and proposed data, on-site and to a distance of 100 feet (200 feet for
Planned Unit Developments) outside the site boundary, exclusive of public rights-of-way.
2. Block frontage classification per Section 38.510, BMC.
3. Setbacks, building footprint and any proposed encroachments. Any setback or property line encroachments must be clearly
SITE PLAN CHECKLIST
BUILDING DESIGN AND SIGNAGE
1. Front, rear and side elevations of all buildings, structures, fences and walls with height dimensions and roof pitches. Show
open stairways, exterior lighting, weather protection, awnings, parapet walls, mechanical equipment and other projections
from exterior building walls. Building elevations must include proposed exterior building materials, windows and doors
including a color and material palette for all proposed features keyed to the building elevations.
2. Provide transparency calculations for any elevation that faces a street and is a block frontage. Provide minimum and maximum
height of transparency from grade. Provide area of transparency and percentage in relation to the total facade.
3. Provide elevations, cross sections and details of all ground mounted and rooftop mechanical screening. Include meter banks
for utilities on elevations.
4. Floor plans that include all floors and roof plan. Annotate/designate uses for all rooms and areas. A seating/serving area layout
is required for all restaurants.
5. Color and Material Palette
a. Color and material palettes are required for all new buildings and structures. A color and material palette must include all
the proposed exterior building materials for all structures and site details.
b. The exterior building materials must include all siding, trim, roofing, windows, stairways, doors, balconies, railings,
storefront, glass/glazing, walls, mechanical screening, trash enclosures, accessory equipment enclosures (generator, etc.),
awnings and other architectural elements.
c. For smaller less complex projects that are using readily known building materials, a color and material palette may be
presented on an 11” x 17” sheet that includes a color picture of the material and the specification. Each material must be
keyed to the building elevations.
d. For larger more complex projects the palette must be presented on a physical board with samples of the proposed building
materials in their proposed color. Each sample must have a specification and be keyed to the building elevations.
e. Color perspectives that depict the building accurately and with the proposed building materials are encouraged to be
submitted with each application. The color perspective does not satisfy the color and materials palette requirement.
6. Exterior signs if applicable. Include building frontage dimension(s) and maximum sign area calculation, provide sign dimensions
and square footage of each. Note — The review of signs in conjunction with this application is only review for sign area
compliance with Section 38.560, BMC (Signs). A sign permit must be obtained from the Building Division prior to erection
of any and all signs, additional design guidelines apply for signs within zoning overlay districts.
Site Plan Checklist Page 5 of 7 Revision Date: June 2020
shown and noted with encroachment type (i.e. awning, weather protection, cantilever, lighting, eave, etc).
4. Sidewalks, walkways, driveways, crosswalks, loading areas and docks, bikeways, including typical details and interrelationships
with vehicular circulation system, indicating proposed treatment of points of conflict.
5. Parking facilities:
a. Circulation aisles and dimensions
b. Parking spaces and dimensions (ADA, compact, motorcycle, etc.)
c. Number of parking spaces, existing and proposed, and total square footage of each
d. On-street parking spaces and dimensions
e. Bicycle parking, existing and proposed, and its location
6. If applicable, identify historic, cultural and archaeological resources. Describe and map any designated historic structures or
districts, and archaeological or cultural sites.
7. Identify any major public facilities, including schools, parks, shared use pathways, trails, etc. located adjacent to the site.
8. Location of open space with dimensions.
LANDSCAPE PLAN
1. Plan preparer must be: a state registered landscape architect; an individual with a degree in landscape design and two years of
professional design experience in the state; or an individual with a degree in a related field (horticulture, botany, plant science,
etc.) and at least five years of professional landscape design experience, of which two years have been in the state.
2. Existing and proposed grade that complies with maximum allowable slope and grade.
SITE PLAN CHECKLIST
LIGHTING PLAN AND DETAILS
1. Lighting plan and electrical site plan, complete with all structures, parking spaces, building entrances, traffic areas (both
vehicular and pedestrian), vegetation that might interfere with lighting, and adjacent uses, containing a layout of all proposed
fixtures by location and type.
2. A photometric lighting plan that contains a layout of all proposed fixtures by location and type and extends the photometric
information to the property boundaries and rights of way. For fueling canopies a second photometric plan is required to
specifically analyze the light output underneath the drip line of the fuel canopy.
3. Details for all proposed exterior fixtures that are keyed to the fixtures noted in the lighting electrical plan and the photometric
lighting plan. The detail must demonstrate compliance with full cut-off requirements in Section 38.570, BMC and be located on
the lighting plan sheets.
4. If building lighting is proposed, elevations or similar information must show the illumination on any vertical surface or angular
roof surface. Ensure that average footcandles is also depicted.
5. If accent lighting is proposed, provide a depiction of location, direction and intensity of any accent lighting, along with where
and to what extent the surface will be illuminated.
Site Plan Checklist Page 6 of 7 Revision Date: June 2020
3. Complete landscape legend providing a description of plant materials shown on the plan, including typical symbols, names
(common, botanical, and cultivar names), locations, quantities, container or caliper sizes at installation, heights, spread and
spacing and identification of drought tolerant and/or native and adapted species. The location and type of all existing trees on
the lot over 2.5 inches in caliper must be specifically indicated.
4. Size of planting at the time of installation and at maturity.
5. Complete illustration of landscaping and screening to be provided in or near off-street parking and loading areas, including
information as to the amount (in square feet) of landscape area to be provided internal to parking areas and the number and
location of required off-street parking and loading spaces.
6. Street frontage landscaping, including boulevard details and tree grate details as applicable based upon block frontage.
7. Locations and dimensions of proposed landscape buffer strips, including watercourse buffer zones demonstrating compliance
with watercourse setback planting plan requirements per Section 38.410.100, BMC unless previously provided during
subdivision review.
8. Location, height and material of proposed landscape screening and fencing (with berms to be delineated by one foot
contours).
9. An indication of how existing healthy trees (if any) will be retained and protected from damage during construction. If
any trees within the public right-of-way are to be removed and/or trimmed, a Public Tree Reimbursement form must be
completed. Please contact the City Forestry Division for the form and more information.
10. Size, height, location and material of proposed seating, lighting, planters, sculptures, and water features.
11. Areas to be irrigated and type of proposed irrigation and the irrigation system design plan.
a. Include a description of proposed watering methods including any use of high efficiency irrigation technologies and best
practice, the source of irrigation water, estimated amount of water consumption broken down by vegetation type (e.g. turf,
shrubs, trees) and total estimated water consumption.
DETAIL SHEET REQUIREMENTS
The detail sheet requirements can be a separate unified sheet or part of the sheets listed above that it relates to, as long as it does
not overly congest the sheet. The requirements below are only if it is applicable to the project.
1. Civil Details:
a. Utility trench
b. Corporation stop
c. Detention/retention infrastructure including drainage swale cross section, pond(s) cross section with structure(s), dry well
cross section, and underground storage plan and sections.
d. Manholes.
SITE PLAN CHECKLIST
PARKLAND REQUIREMENTS
1. If parkland is proposed, a park plan shall be submitted consistent with Section 38.220.060.A.16, BMC.
a. Park plan must include all property boundary dimensions and frontage calculations per Section 38.420.060.A, BMC.
Justification for any reduction in frontage must be addressed in the Park Plan narrative.
b. If there is any “unacceptable” land being proposed for inclusion within the larger park area per Section 38.420.020.E,
BMC, it must be displayed on the park plan drawings and justification provided in the Park Plan narrative.
c. Any request for parkland waiver per Section 38.420.100, BMC must be provided in the Park Plan narrative.
2. Provide net density for the project based on the definition in Section 38.700.130, BMC and show calculations including value
of all areas reduced. For Master Site Plans, provide an estimate of net density. Provide calculations within the Park Plan
narrative and final results on the Park Plan cover sheet.
3. A parkland dedication tracking table per Section 38.420.020.A, BMC must be included on the site plan cover sheet. If you have
questions on how to fill out this table, contact the Parks Division.
4. Provide source and amount of parkland credit to be used if previously provided. If credit is from a subdivision, confirm the
amount provided and detailed phase information.
5. If the park proposal includes improvements-in-lieu of parkland, provide a table with cost estimates and indicate in which phase
of the development the improvements in-lieu will be installed, if applicable.
Site Plan Checklist Page 7 of 7 Revision Date: June 2020
REQUIRED FORMS
A1,N1, DEM (if demolition within the NCOD), WR (if wetlands are on site), AH (if affordable housing is required)
2. Bicycle rack type and detail
3. Provision for handicapped accessibility, including but not limited to, wheelchair ramps, parking spaces, handrails and curb cuts,
including signage and construction details and the applicant’s certification of ADA compliance.
4. Fences, walls, railings and handrails, including typical details.
5. Permanent trash enclosure and refuse collection areas, including typical details and elevations.
6. Curb, asphalt section, sidewalk and drive approach construction details.
7. Trail section.
APPLICATION FEE
Base Fee: $2,165
If includes dwellings, add: $118 per dwelling unit, not to exceed 150 dwelling units
If nonresidential uses, add: $530 per 1000 square feet of nonresidential gross building area up to 30,000 square feet
$250 per 1000 square feet of nonresidential gross building area over the initial 30,000 square
feet and not to exceed 150,000 square feet
If proposed building is 4+ stories in height, $102 per 1000 square feet of nonresidential gross
building area over the initial 30,000 square feet, not to exceed 150,000 square feet
If departure requested, add: $241 each
Application types and fees are cumulative.
CONTACT US
Alfred M. Stiff Professional Building
20 East Olive Street
PO Box 1230
Bozeman, MT 59715
phone 406-582-2260
fax 406-582-2263
planning@bozeman.net
www.bozeman.net/planning