HomeMy WebLinkAbout003 G1.0.1 CODE SUMMARYAPPLICABLE CODES AND ORDINANCES
SPECIAL DETAILED REQUIREMENTS BASED ON OCCUPANCY AND USE
BUILDING OCCUPANCY DATA
FIRE AND SMOKE PROTECTION FEATURES
BUILDING CONSTRUCTION
PLUMBING CALCULATIONS
FIRE PROTECTION SYSTEMS
BUILDING EXITING - EGRESS
ENERGY CODE - BUILDING ENVELOPE
2021 INTERNATIONAL BUILDING CODE (IBC)
2021 INTERNATIONAL EXISTING BUILDING CODE
2021 INTERNATIONAL ENERGY CONSERVATION CODE
2018 INTERNATIONAL FIRE CODE (IFC)
2021 INTERNATIONAL MECHANICAL CODE (IMC)
2021 INTERNATIONAL FUEL GAS CODE (IFGC)
2021 UNIFORM PLUMBING CODE
2020 NATIONAL ELECTRICAL CODE
2017 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES (ICC/ANSI 117.1)
INCLUDES ALL CONDITIONED BUILDING AREAS INCLUDING MECHANICAL SHAFTS, ELEVATOR SHAFTS, AND STAIRWELLS
B OCCUPANCY (NOT IN SCOPE) = 2368 SF
R-4 OCCUPANCY (CHANGE FROM B) = 4819 SF
TOTAL BUILDING SQUARE FOOTAGE = 7187 SF
BUSINESS GROUP B (PER IBC 304.1)
RESIDENTIAL GROUP R-4 (PER IBC 310.5)
GENERAL BUILDING HEIGHTS AND AREAS
CONSTRUCTION TYPE: 5B, FULLY SPRINKLERED
TYPE X REQUIRED FIRE RESISTANCE PER TABLE 601:
PRIMARY STRUCTURAL FRAME:0 HR
BEARING WALLS
EXTERIOR:0 HR
INTERIOR:0 HR
NONBEARING WALLS AND PARTITIONS PER TABLE 602:
EXTERIOR:0 HR
NONBEARING WALLS AND PARTITIONS:
INTERIOR:0 HR
FLOOR CONSTRUCTION AND ASSOCIATED SECONDARY MEMBERS: 0 HR
ROOF CONSTRUCTION AND ASSOCIATED SECONDARY MEMBERS:0 HR
SEPARATION DISTANCES PER TABLE 705.5:
FIRE SEPARATION DISTANCE, TYPE 5B, OCCUPANCY R-4
FIRE DISTANCE OCCUPANCY R-4
X<5' 1 HR
5' < X < 10 1 HR
10 < X < 30 0 HR
X > 30 0 HR
VERTICAL SEPARATION OF OPENINGS (PER SECTION 705.8.5)
THIS SECTION SHALL NOT APPLY TO BUILDINGS THAT ARE THREE STORIES OF LESS ABOVE GRADE PLANE.
FIRE WALL FIRE-RESISTANCE RATINGS (PER TABLE 706.4)
N/A
FIRE BARRIERS (PER SECTION 707)
N/A
FIRE PARTITIONS (PER SECTION 708)
N/A
SHAFT ENCLOSURES (PER SECTION 713)
N/A
ELEVATOR LOBBY (PER SECTION 713.14)
N/A
OPENING PROTECTIVES (PER SECTION 716)
EXIT ENCLOSURE DOORS: 1 1/2 HOUR
SHAFT ACCESS AT 2 HOUR WALLS: 1 1/2 HOUR
SHAFT ACCESS AT 1 HOUR WALLS: 1 HOUR
DOORS IN OTHER FIRE BARRIERS: 3/4 HOUR
FIRE DOORS SHALL BE SELF-CLOSING OR AUTOMATIC CLOSING
OCCUPANCY TYPE OCCUPANT LOAD
EMPLOYEES AND VISITORS IN
HOSPITALS AND NURSING HOMES
CUSTODIAL CARE FACILITIES
TOTAL:
19 PERSONS (9 MEN + 10 WOMEN)
10 PERSONS (5 MEN + 5 WOMEN)
29 PERSONS 14 MEN, 15 WOMEN
WATER
CLOSET LAVATORY
MEN WOMEN
DRINKING
FOUNTAIN
TOTAL
PROVIDED:
RATIO WATER
CLOSETRATIO RATIOOCCUPANCY
GROUP
CUSTODIAL
CARE 1 1 1 11:10 1:10 1:100
2
PER 2021 IECC TABLE C402.2:
INSULATION ENTIRELY ABOVE DECKROOFS
METAL FRAMEDWALLS, ABOVE GRADE
BELOW- GRADE WALLWALLS, BELOW GRADE
UNHEATED SLABSSLAB- ON- GRADE FLOORS
SWINGING
OPAQUE DOORS
REQUIRED PROVIDED
ROLL- UP OR SLIDING
MONTANA - CLIMATE ZONE 6B
R-30ci
R-13 + R-10ci
R-15ci
R-20 FOR 24" BELOW
U-0.37
R-4.75
EXISTING
EXISTING
EXISTING, R-15ci AT NEW FOUNDATION WALL
EXISTING
EXISTING, U-0.37 AT NEW DOORS
N/A
BUILDING ELEMENT
FIXED FENESTRATION
OPERABLE FENESTRATION
ENTRANCE DOORS
U-0.34; SHGC-0.38
U-0.42; SHGC-0.34
U-0.63; SHGC-0.34
U-0.33 MIN;
GLAZING SHGC 0.27 MIN
N/A
U-0.33 MIN;
GLAZING SHGC 0.27 MIN
OCCUPANT LOAD (PER TABLE 1004.1.2)
SEE EGRESS PLANS FOR OCCUPANCY TYPE AND OCCUPANT LOAD PER AREA BASED ON TABLE 1004.1.2
MEANS OF EGRESS WIDTH (PER SECTION 1005)
STAIRWAYS: 0.3 INCHES PER OCCUPANT (EXCEPTION: IF BUILDING IS SPRINKLERED, APPLY .02 INCHES PER OCCUPANT)
OTHER COMPONENTS: 0.2 PER OCCUPANT (EXCEPTION: IF BUILDING IS SPRINKLERED, APPLY .15 INCHES PER OCCUPANT)
EGRESS ILLUMINATION (PER SECTION 1008)
EMERGENCY EGRESS LIGHTING TO BE A MINIMUM OF 1 FOOT CANDLE AT WALKING SURFACE FOR A MINIMUM DURATION OF 90 MINUTES AND
SHALL CONSIST OF STORAGE BATTERIES, UNIT EQUIPMENT OR AN ON-SITE GENERATOR.
EXIT DOOR REQUIREMENTS (PER SECTION 1010)
SINGLE LEAF MINIMUM CLEAR WIDTH = 32"
PER 1010.1.2.1 DOORS SHALL SWING IN DIRECTION OF EGRESS TRAVEL WHERE SERVING A ROOM/ OR AREA CONTAINING AN OCCUPANT LOAD OF
50 OR MORE PERSONS.
STAIRWAYS (PER SECTION 1011)
N/A
EXIT SIGNS (PER SECTION 1013)
ALL EXIT AND EXIT ACCESS DOORS SHALL BE MARKED BY AN APPROVED EXIT SIGN READILY VISIBLE FROM ANY DIRECTION OF EGRESS TRAVEL.
EXIT ACCESS TRAVEL DISTANCE (PER SECTION 1017)
SPRINKLERED BUIDING: 250'
CORRIDORS (PER SECTION 1020)
EXCEPTION 2: A FIRE RESISTANCE RATING IS NOT REQUIRD FOR CORRDIRS CONTAINED WITHIN A DWELLING UNIT OR SLEEPING UNIT IN AN
OCCUPANCY IN GROUPS I-1 OR R, IN BUILDING EQUIPPED THROUGHOUT WITH AN AUTOMATIC SPRINKLER SYSTEM IN ACCORDANCE WITH SECTION
903.3.1 OR 903.3.1.2 ARE NOT REQUIRED TO BE RATED.
MINIMUM WIDTH = 44" / DEAD ENDS (OCCUPANCY B, = 50' MAX DEAD ENDS (OCCUPANCY R-4) = 20' MAX
EXIT PASSAGEWAYS (PER SECTION 1024)
PER 402.8.6.1 EXIT PASSAGEWAYS: WHERE EXIT PASSAGEWAYS PROVIDE A SECONDARY MEANS OF EGRESS FROM A TENANT
SPACE, DOORWAYS TO THE EXIT PASSAGEWAY SHALL BE PROTECTED BY A 1-HOUR FIRE DOOR ASSEMBLIES THAT ARE SELF OR
AUTOMATIC CLOSING BY SMOKE DETECTION IN ACCORDANCE WITH SECTION 716.5.9.3
AUTOMATIC FIRE SPRINKLERS (PER SECTION 903)
BUILDING SHALL BE FULLY SPRINKLERED. REFER TO 402.5 FOR PROVISIONS WITH A COVERED MALL BUILDING.
PORTABLE FIRE EXTINGUISHERS (PER SECTION 906)
SHALL BE PROVIDED IN OCCUPANCIES AND LOCATIONS AS REQUIRED BY THE FIRE CODE.
CLASS A FIRE EXTINGUISHERS TO BE PROVIDED AT 150' SEPARATION DISTANCE.
FIRE ALARM AND DETECTION (PER SECTION 907)
PER 402.7.4 WHERE THE TOTAL FLOOR AREA IS GREATER THAN 50,000 SF WITHIN A COVERED MALL BUILDING, AN EMERGENCY VOICE/ALARM
COMMUNICATION SYSTEM SHALL BE PROVIDED IN ACCORDANCE WITH SECTION 907.5.2.2
EMERGENCY RESPONDER SAFETY FEATURES (PER SECTION 914.2 AND 402.7.5)
ROOMS OR AREAS CONTAINING CONTROLS FOR AIR CONDITIONING SYSTEMS, AUTOMATIC FIRE-EXTINGUISHING SYSTEMS, AUTOMATIC
SPRINKLER SYSTEMS OR OTHER DETECTION, SUPPRESSION OR CONTROL ELEMENTS SHALL BE IDENTIFIED FOR USE BY THE FIRE
DEPARTMENT. APPROVED SIGNS REQUIRED TO IDENTIFY FIRE PROTECTION EQUIPMENT AND EQUIPMENT LOCATION SHALL BE CONSTRUCTED
OF DURABLE MATERIALS, PERMANENTLY INSTALLED AND READILY VISIBLE.
ACCESSIBILITY
SECTION 1103 SCOPING REQUIREMENTS - 1103.1 WHERE REQUIRED.
SITES, BUILDINGS, STRUCTURES, FACILITIES, ELEMENTS AND SPACES, TEMPORARY OR PERMANENT, SHALL BE ACCESSIBLE TO
PERSONS WITH PHYSICAL DISABILITIES.
EXCEPTIONS:
1103.2.2 EMPLOYEE WORK AREAS. SPACES AND ELEMENTS WITHIN EMPLOYEE WORK AREAS SHALL ONLY BE REQUIRED TO
COMPLY WITH SECTION 907.5.2.3.2, 1009, AND 1104.3.1 AND SHALL BE DESIGNED AND CONSTRUCTION SO THAT INDIVIDUALS
WITH DISABILITIES CAN APPROACH, ENTER, AND EXIT THE WORK AREAS.
1103.2.7 LIMITED ACCESS SPACES. NONOCCUPIABLE SPACES ACCESSED ONLY BY LADDERS, CATWALKS, CRAWLSPACES,
FREIGHT ELEVATORS OR VERY NARROW PASSAGEWAYS ARE NOT REQUIRED TO BE ACCESSIBLE.
1103.2.9 EQUIPMENT SPACES. SPACES FREQUENTED ONLY BY PERSONNEL FOR MAINTENANCE, REPAIR OR MONITORING OF
EQUIPMENT ARE NOT REQUIRED TO BE ACCESSIBLE.
2203.2.14 WALK IN COOLERS AND FREEZERS. WALK IN COOLERS AND FREEZERS INTENDED FOR EMPLOYEE USE ONLY ARE NOT
REQUIRED TO BE ACCESSIBLE.
SECTION 1104 ACCESSIBLE ROUTES - 1104.5 LOCATION.
ACCESSIBLE ROUTES SHALL COINCIDE WITH OR BE LOCATED IN THE SAME AREA AS A GENERAL CIRCULATION PATH. WHERE
THE CIRCULATION PATH IS INTERIOR, THE ACCESSIBLE ROUTE SHALL ALSO BE INTERIOR. WHERE ONLY ONE ACCESSIBLE
ROUTE IS PROVIDED, THE ACCESSIBLE ROUTE SHALL NOT PASS THROUGH KITCHENS, STORAGE ROOMS, RESTROOMS,
CLOSETS, OR SIMILAR SPACES.
1105.1 PUBLIC ENTRANCES.
IN ADDITION TO ACCESSIBLE ENTRANCES REQUIRED BY SECTION 1105.1.1 THROUGH 1105.1.6, AT LEAST 60 PERCENT OF ALL
PUBLIC ENTRANCES SHALL BE ACCESSIBLE.
EXCEPTIONS:LOADING AND SERVICE ENTRANCES THAT ARE NOT THE ONLY ENTRANCE TO A TENANT SPACE.
1105.1.7 TENANT SPACES.
AT LEAST ONE ACCESSIBLE ENTRANCE SHALL BE PROVIDED TO EACH TENANT.
SECTION 1106 PARKING AND PASSENGER LOADING FACILITIES - 1106.1 REQUIRED.
WHERE PARKING IS PROVIDED, ACCESSIBLE PARKING SPACES SHALL BE PROVIDED IN COMPLIANCE WITH TABLE 1106.2, EXCEPT
AS REQUIRED BY SECTION 1106.3 THROUGH 1106.5.
1106.7 LOCATION.
ACCESSIBLE PARKING SPACES SHALL BE LOCATED ON THE SHORTEST ACCESSIBLE ROUTE OF TRAVEL FROM ADJACENT
PARKING TO AN ACCESSIBLE BUILDING ENTRANCE.
SECTION 1109 SPECIAL OCCUPANCIES - 1109.2 ASSEMBLY AREA SEATING.
A BUILDING, ROOM OR SPACE USED FOR ASSEMBLY PURPOSED WITH FIXED SEATING SHALL COMPLY WITH SECTION 1109.2.1
THROUGH 110.92.5. PER 1109.2.2.1 GENERAL SEATING. WHEELCHAIR SPACES SHALL BE PROVIDED IN ACCORDANCE WITH TABLE
1109.2.2.1.
SECTION 1112 SIGNAGE - 1112.1 SIGNS.
REQUIRED ACCESSIBLE ELEMENTS SHALL BE IDENTIFIED BY THE INTERNATIONAL SYMBOL OF ACCESSIBILITY AT THE FOLLOWING
LOCATIONS: ACCESSIBLE PARKING SPACES, PASSENGER LOADING ZONES,
ROOMS, ENTRANCES, CHECK-OUT AISLES, FAMILY OR ASSISTED-USE TOILET AND BATHING ROOMS, AREAS OF REFUGE, AND
EXTERIOR AREAS. IN ADDITIONAL 1110.2 DIRECTIONAL SIGNAGE. DIRECTIONAL SIGNAGE INDICATING THE ROUTE TO THE
NEAREST LIKE ACCESSIBLE ELEMENT SHALL BE PROVIDED AT THE FOLLOWING LOCATIONS STATED IN 1110.2 AND INCLUDE THE
INTERNATIONAL SYMBOL OF ACCESSIBILITY.
1112.5 VARIABLE MESSAGE SIGNS - TRANSPORTATION FACILITIES.
WHERE PROVIDED IN TRANSPORTATION FACILITIES, VARIABLE MESSAGE SIGNS CONVEYING TRANSPORTATION-RELATED
INFORMATION SHALL COMPLY WITH SECTION 1112.5
R-4
OCCUPANCY
CLASSIFICATION
TYPE OF
CONSTRUCTION
AREA /
ALLOWABLE
V-B 28000
R-4
NUMBER OF STORIES /
ALLOWABLE
PRIMARY
OCCUPANCY
CLASSIFICATION
TYPE OF
CONSTRUCTION
BUILDING HEIGHT /
ALLOWABLE
V-B 3 60
PER IBC TABLES 504.3, 504.4
PER IBC TABLE 506.2
FIRE AND SMOKE PROTECTION FEATURES
DUCTS AND AIR TRANSFER OPENINGS (PER SECTION 717)
DUCTS THAT PENETRATE FIRE-RESISTANCE-RATE ASSEMBLIES AND ARE NOT REQUIRED BY THIS SECTION TO HAVE DAMPERS SHALL COMPLY
WITH THE REQUIREMENTS OF SECTION 714.2 THROUGH 714.3.3. DUCTS THAT PENETRATE HORIZONTAL ASSEMBLIES NOT REQUIRED TO BE
CONTAINED WITHIN A SHAFT AND NOT REQUIRED BY THIS SECTION TO HAVE DAMPERS SHALL COMPLY WITH THE REQUIREMENTS OF SECTIONS
714.4 THROUGH 714.4.2.2
DUCTS THAT PENETRATE NONFIRE-RESISTANCE-RATED ASSEMBLIES. THE SPACE AROUND A DUCT PENETRATING A NONFIRE-RESISTANCE-RATED
FLOOR ASSEMBLY SHALL COMPLY WITH SECTION 717.6.3.
CONCEALED SPACES (PER SECTION 718)
FIREBLOCKING AND DRAFTSTOPPING SHALL BE INSTALLED IN COMBUSTIBLE CONCEALED LOCATIONS IN ACCORDANCE WITH SECTION 718.
FIREBLOCKING SHALL COMPLY WITH SECTION 718.2. DRAFTSTOPPING IN FLOOR/CEILING SPACES AND ATTIC SPACES SHALL COMPLY WITH
SECTION 718.3 AND 718.4, RESPECTIVELY. THE PERMITTED USE OF COMBUSTIBLE MATERIALS IN CONCEALED SPACES OF BUILDINGS OF TYPE I
OR II CONSTRUCTION SHALL BE LIMITED TO THE APPLICATIONS INDICATED IN SECTION 718.5.
BATHTUB /
SHOWER RATIO
2 1:8
RATIO
1:10
LAVATORY
1
RATIO
1:10
2
2
2
3 2
BUSINESS GROUP B - NOT IN SCOPE. PROVIDE PENETRATIONS THROUGH DEMISING WALL. CAP PENETRATIONS FOR FUTURE FIRE SPRINKLER INSTALL.
RESIDENTIAL GROUP R-4 - FULL TENANT IMPROVEMENT BUILDOUT WITH OCCUPANCY CHANGE FROM B TO R-4
AA(R-4) = AT+(NS x IF) = 28,000SF + (7,000SF x 0) = 28000SF
2021 INTERNATIONAL ENERGY CODE SUMMARIES AND REFERENCE SECTIONS BELOW ARE PROVIDED FOR CONVENIANCE ONLY .
IT IS THE CONTRACTORS RESPONSIBILITY TO UNDERSTAND AND MEET THE REQUIREMENTS OF THE 2021 INTERNATIONAL
ENERGY CODE
C402.5 AIR LEAKAGE (MANDATORY)
THE THERMAL ENVELOPE OF BUILDINGS SHALL COMPLY WITH SECTIONS C402.4.1 THROUGH C402.4.8
C402.5.1 AIR BARRIERS
A CONTINUOUS AIR BARRIER SHALL BE PROVIDED THROUGHOUT THE BUILDING THERMAL ENVELOPE.
C402.5.1.1 AIR BARRIER CONSTRUCTION
1. THE AIR BARRIER SHALL BE CONTINUOUS FOR ALL ASSEMBLIES THAT ARE THE THERMAL ENVELOPE OF
THE BUILDING AND ACROSS THE JOINTS AND ASSEMBLIES.
2. AIR BARRIER JOINTS AND SEAMS SHALL BE SEALED, INCLUDING SEALING TRANSITIONS IN PLACES AND
CHANGES IN MATERIALS. THE JOINTS AND SEALS SHALL BE SECURELY INSTALLED IN OR ON THE JOINT FOR
ITS ENTIRE LENGTH SO AS NOT TO DISLODGE, LOOSEN OR OTHERWISE IMPAIR ITS ABILITY TO RESIST POSITIVE
AND NEGATIVE PRESSURE FROM WIND, STACK EFFECT AND MECHANICAL VENTILATION.
3. PENETRATIONS OF THE AIR BARRIER SHALL BE CAULKED, GASKETED OR OTHERWISE SEALED IN A MANNER
COMPATIBLE WITH THE CONSTRUCTION MATERIALS AND LOCATION. SEALING SHALL ALLOW FOR EXPANSION,
CONTRACTION AND MECHANICAL VIBRATION. JOINTS AND SEAMS ASSOCIATED WITH PENETRATIONS SHALL
BE SEALED IN THE SAME MANNER OR TAPED. SEALING MATERIALS SHALL BE SECURELY INSTALLED AROUND THE
PENETRATION SO AS NOT TO DISLODGE, LOOSEN OR OTHERWISE IMPAIR THE PENETRATIONS’ ABILITY TO
RESIST POSITIVE AND NEGATIVE PRESSURE FROM WIND, STACK EFFECT AND MECHANICAL VENTILATION. SEALING OF
CONCEALED FIRE SPRINKLERS, WHERE REQUIRED, SHALL BE IN A MANNER THAT IS RECOMMENDED BY THE
MANUFACTURER. CAULKING OR OTHER ADHESIVE SEALANTS SHALL NOT BE USED TO FILL VOIDS BETWEEN
FIRE SPRINKLER COVER PLATES AND WALLS OR CEILINGS.
4. RECESSED LIGHTING FIXTURES SHALL COMPLY WITH SECTION C402.5.10. WHERE SIMILAR OBJECTS ARE
INSTALLED THAT PENETRATE THE AIR BARRIER, PROVISIONS SHALL BE MADE TO MAINTAIN THE INTEGRITY OF
THE AIR BARRIER.
C402.5.1.4 ASSEMBLIES
THE BUILDING THERMAL ENVELOPE SHALL BE TESTED AND THE AIR LEAKAGE RATE OF THE BUILDING
ENVELOPE SHALL NOT EXCEED 0.40 cfm/ft² AT A PRESSURE DIFFERENTIAL OF 0.3 INCHES WATER GAUGE
(2.0l/s*m² AT 75 Pa) IN ACCORDANCE WITH ASTM E779 OR AN EQUIVALENT METHOD APPROVED BY THE CODE
OFFICIAL.
C402.4.2 AIR BARRIER PENETRATIONS
A CONTINUOUS AIR BARRIER SHALL BE PROVIDED THROUGHOUT THE BUILDING THERMAL ENVELOPE.
PER MONTANA ARM 24.301.351 - MINIMUM REQUIRED PLUMBING FIXTURES
1:25 1:35 1:100EMPLOYEES
AND VISITORS 1 1 11 -1:25 1 1:25
TOTAL
REQUIRED 2 2
2
2
2
2
issue date
project #
phasesheet projectownerrevision dateaddress
PERMIT SET8/29/2022 5:33:41 PMG1.0.1
08/29/2022CODE SUMMARY22006.00
PERMIT SETSPANISH PEAKSCONNECTIONS HEALTH SOLUTIONS120 19TH AVE. SUITE HBOZEMAN, MONTANA 59718OCCUPANT LOAD FACTOR
NAME
OCCUPANCY
TYPE
FUNCTION OF
SPACE AREA
OCCUPANT
LOAD FACTOR
OCCUPANT
LOAD
ACCESSORY STORAGE AREAS, MECHANICAL B LAUNDRY/MECH/IT 292 SF 300 SF 1
ACCESSORY STORAGE AREAS, MECHANICAL R-4 STORAGE 86 SF 300 SF 1
ASSEMBLY, UNCONCENTRATED B WAITING 21 SF 15 SF 2
ASSEMBLY, UNCONCENTRATED B WAITING 36 SF 15 SF 3
BUSINESS B CONSULT 109 SF 240 SF 1
BUSINESS B CONSULT 104 SF 240 SF 1
BUSINESS R-4 NURSES' STATION 608 SF 150 SF 5
BUSINESS R-4 LAB 62 SF 150 SF 1
INPATIENT SLEEPING AREAS R-4 PATIENT ROOM 165 SF 120 SF 2
INPATIENT SLEEPING AREAS R-4 PATIENT ROOM 165 SF 120 SF 2
INPATIENT SLEEPING AREAS R-4 PATIENT ROOM 162 SF 120 SF 2
INPATIENT SLEEPING AREAS R-4 INVOLUNARY PATIENT 82 SF 240 SF 1
INPATIENT SLEEPING AREAS R-4 PATIENT ROOM 191 SF 120 SF 2
INPATIENT SLEEPING AREAS R-4 INVOLUNARY PATIENT 81 SF 240 SF 1
INPATIENT TREATMENT AREAS R-4 CONSULTANT 94 SF 240 SF 1
KITCHENS, COMMERCIAL B CATERING/FOOD
PREP
163 SF 200 SF 1
LOCKER ROOM R-4 BREAK ROOM 176 SF 50 SF 4
TOTAL OCCUPANTS 31
OCCUPANT LOAD