HomeMy WebLinkAboutTRUEGRID PRO LITE Grass Infill Medium Load.PDFTRUEGRID BLOCK REFERENCE VIEW
PREASSEMBLED & DELIVERED
IN 4' X 4' SHEET. RECONFIGURED
AS NEEDED. NO EXTRA TOOLING
OR ACCESSORIES REQUIRED
1.0"
COMPACTED
SUBGRADE
TOPSOIL/GROWING MEDIAOR SOD ROOT MASS TO
TOP OF GRID
4.0"MIN
TRUEGRID PERMEABLE PAVING SYSTEM
GEOGRID MESH
OR GEOFABRIC
OPTION LOCATION:
SEE NOTE #4
SAND/GRAVEL BASE MIX COMMON
WITH GRASS FILL APPLICATIONS
ADJOINING FINISH GRADE TRUEGRID
SURFACE FLUSH OR SLIGHTLY
RECESSED SEE DRAWING
TG-EDGE-OPTS FOR EDGING OPTIONS
GRASS (SEEDED ORSODDED) WITHONLY GRASSBLADES ABOVE GRID
GRASS FILL - MEDIUM LOAD
APPLICATION EXAMPLES:
PATIOS
PADS
PATHWAYS - GOLF CARTS, TRACTORS,
PEDESTRIAN, BICYCLES
1. SUB-BASE DEPTH AND PREPARATION IS DEPENDENT ON SITE CONDITIONS PLUS LOADING REQUIREMENTS. 2. SEEDING METHOD: FILL SOIL/GROWING MEDIA TO TOP OF GRID. APPLY SEEDING OR HYDROSEEDING PER MANUFACTURERS' (BY OTHERS) REQUIRED APPLICATION RATES. 3. SOD INSTALLATION METHOD: UNROLL AND PRESS SOD INTO EMPTY GRID SO TOP OF GRID IS AT SOIL/ROOT LEVEL AND ONLY THE GRASS BLADES EXTEND ABOVE THE GRID.
4. GEOGRID MESH OR GEOFABRIC MAY BE REQUIRED BETWEEN SUBGRADE & SUBBASE FOR CERTAIN SOILS AND SITE SPECIFIC REQUIREMENTS. 5. TRUEGRID PRO LITE PRODUCTS ARE SUFFICIENTLY RATED FOR LOW TRAFFIC H-20/HS-20 LOADING.
6. NO STAKING TYPICALLY NECESSARY WITH TRUEGRID PRO LITE WHEN SLOPE IS BELOW 20 DEGREES, ASSESS PROJECT AS NEEDED.
7. TRUEGRID PRO LITE IS ADA COMPLIANT WITH PROPER FILL MATERIAL.
8. ALTERNATIVE ENGINEERED SUB-BASE MIXES CAN BE USED PROVIDED THEY PROMOTE GRASS GROWTH, HAVE ADEQUATE VOID SPACE FOR DRAINAGE, AND PROVIDE REQUIRED STRUCTURAL SUPPORT.
9. THIS CROSS SECTION IS FOR INFORMATION ONLY.
ENGINEERED SUB-BASE:COMPACTED 3/4 MINUS SANDY-GRAVELBASE MATERIAL. COMMON - ROADBASE FROM NON-RECYCLED SOURCES
REVSIZE
SCALE
DRAWN BY:
CHECKED BY:
FILE I.D.:
APPROVED BY:
DO NOT SCALEDRAWING
AA
B
C
D
B
C
D
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
NOTES:
J. Thethy 2/22/2020
1 OF 11:2
D TGFB-LTE-GRS-ML 01
DATE:
DATE:
DATE:
UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN INCHES
DRAWING NUMBER:
APPROVALINFORMATION
SHEETREVISION
DRAWN CHECKED APPROVED DATEREV
01 J. Thethy MEDIUM LOAD
GRASS FILL
TRUEGRID PRO LITR
UPDATED NOTES, FLAG NOTES JT JT CW 9/3/2020 2/22/2020
C. White 2/22/2020
CLIENT / PROJECT
PROPRIETARY DESIGN RIGHTS NOTICE:
THIS DESIGN WAS ORIGINATED BY AND IS
THE EXCLUSIVE PROPERTY OF TRUEGRID.
IT IS DISCLOSED IN CONFIDENCE
WITH THEUNDERSTANDING THAT NO
REPRODUCTIONOR OTHER USE OF THE
INFORMATION ISAUTHORIZED WITHOUT
SPECIFIC AGREEMENT IN WRITING BY
TRUEGRID.
MANUFACTURED IN
NORTH AMERICA
1-855-355-GRID (4743)