HomeMy WebLinkAbout006-Specifications_09-04-2018X. CLEANING/PROTECTION AND WARRANTIES
A. All items to be installed by the
contractor shall be left in a clean and
as-new condition. Upon completion
of the installation, clean all soiled
surfaces and touch up all finishes in
accordance with the manufacturer’s
instructions. All debris and packing
material shall be removed and
disposed of in a legal manner. The
protective masking of the plastic
surfaces shall be removed by the
contractor upon completion of
installation. All excavation and site
work shall be returned to its original
grade configuration after contract
items are installed.
B. Finish Surfaces
All units shall be warranted in writing
by the contractor for a period of no
less than one year from the date
of Owner acceptance. All finishes
(except large format computer
output) are to be warranted for
3 years from the date of Owner
acceptance. There shall be:
1. No delamination of any portion
of the object including vinyl graphics
and copy.
2. No cupping, warping or dishing.
3. No bubbling, crazing, chalking,
rusting or other disintegration
of surfaces, messages or edge
finishes.
4. No corrosion developing beneath
the paint surface of the support
systems, except as the result of
obvious vandalism.
5. No corrosion of the fasteners.
6. No movement of objects from
their foundations. The objects must
remain true and plumb on their
foundations, except when obvious
post-installation external damage has
occurred.
7 . No fading of the colors when
matched against a sample of the
original color and material.
8. No variation of any other
performance stated by Design
Workshop on the drawings or in the
Fabricator Performance and Material
Requirements.
C. Structure/Components
Contractor shall provide Owner with
3 copies of the written warranty
prior to installation guaranteeing to
correct, to Owner’s satisfaction, at
contractor’s sole expense, all defects
in fabrication and installation of
work for a period of one year after
Owner’s acceptance of completed
installation.
D. Maintenance
The contractor shall provide to
Owner 3 copies each of complete
finish/component care instructions
as specified by the manufacturer
for on-going cosmetic cleaning
and maintenance. These are
to be submitted in an 8-1/2” x
11” 3-ring binder. Contractor to
ensure signage, neon, lamps, and
electrical components etc. are easily
accessible for maintenance.
XI. PERMITS
A. Securing and paying for all permits
required by governmental agencies
is the responsibility of the contractor.
Inspections and tests necessary for
the construction and placement of
all work required by the applicable
governing agencies is by the
contractor.
XII. THE AMERICANS WITH DISABILITIES ACT REQUIREMENTS
ALL SIGNS MUST COMPLY WITH
ADA GUIDELINES AND/OR CODE
REQUIREMENTS. ALL CARTS,
KIOSKS, BOOTHS, FURNITURE
AND ANY OTHER OBJECT OR
FABRICATION DESCRIBED IN THE
DESIGN INTENT DOCUMENTS
MUST COMPLY WITH ADA
GUIDELINES AND ALL APPLICABLE
CODE REQUIREMENTS.
is responsible for all other aspects
of fabrication including engineering,
procedure, installation techniques
and performance as well as
coordination with site conditions and
related trades.
B. Product Data
The contractor shall submit
manufacturer’s technical data
and installation instructions for
each fixture provided within the
completed, installed unit. Contractor
shall provide identification of
all materials used, including
manufacturer’s descriptive literature,
control number, name, code number,
batch and formula (when available).
C. Specific Samples
The contractor shall submit a
minimum of three (3) samples
(minimum size 6” x 6” or as
requested by Design Workshop) of
each color and finish on the specified
materials. Samples must be
submitted in a timeframe allowable
for review, multiple adjustments,
and approval without delay to the
project. Design Workshop’s review
of samples will be for color, texture,
and aesthetic compatibility with
existing or adjacent materials.
Compliance with all other
requirements is the exclusive
responsibility of the contractors.
When specified, furnish full-size
samples of objects, partial objects,
and/or materials. Resubmit samples
if requested until required sheen,
color, texture, and compliance with
Fabricator Performance and Material
Requirements is accepted.
D. Structure
Design of installation, internal
structure, mounting assemblies
and foundations are by contractor.
Contractor shall submit three sets
of prints and one reproducible set
of comprehensive engineering
drawings to Design Workshop
incorporating an adequate foundation
and/or mounting structure for all
sign components to meet all load
and wind requirements and given
site conditions. The contractor shall,
at his or her expense, submit for
Owner’s review, calculations, sealed
by certified engineers registered
in the state of final installation, for
all structural members including
foundations.
E. Custom Fabricated Items
The contractor is to submit shop
drawings of all custom fabricated
items and specifications on all
standard pre-manufactured items.
F. Maintenance
The contractor shall provide the
Owner with complete finish/
component care instructions as
specified by the manufacturer for
on-going cosmetic cleaning and
maintenance. Three sets are to be
submitted in an 8-1/2” x 11” 3-ring
binder. Turn over to Owner one (1)
unopened gallon of each color and
finish used on the project clearly
marked with complete specification
and “P” color reference.