HomeMy WebLinkAboutA00-44 - ACCESSIBILITY DETAILSHATCHED AREA REPRESENTS
MIN. REINFORCED AREA
BACK WALL (OPPOSITE CONTROL WALL)
CONTROL AND SIDE WALL
NOTE: DESIGN BASED UPON 2009 ANSI A117.1 REQUIREMENTS.NOTE: ALL DIMENSIONS ARE TO FACE OF FINISH
NOTE: IF INTEGRAL SURROUND PROVIDED, BLOCKING TO BE TIGHT TO SURROUND.
FULL WIDTH
8"2' - 0"6"8"2' - 6"8"5' - 0"FULL WIDTH VERTICAL BLOCKING ON
DOOR SIDE OF WALL
17' - 6"5' - 0"8' - 0"
NOTES:
1) MAINTAIN 8' - 6" CLEAR FLOOR TO
CEILING HEIGHT WITHIN ALL
GARAGE DRIVE AISLES TO VAN
ACCESSIBLE STALLS
2) SURFACE OF PARKING SPACE(S)
AND ACCESS AISLE(S) NOT TO
EXCEED 1:50 GRADIENT (2%) IN ANY
DIRECTION
3) WIDTH MEASUREMENTS SHALL
BE TAKEN FROM THE CENTERLINE
OF THE STALL MARKINGS PER ANSI
SECTION 502.3
4" TRAFFIC YELLOW
OUTLINE STRIPING
A00.44
4
A00.44
75' - 0"GARAGE FLOOR
WALL BEYOND
REFER TO GARAGE
PLANS FOR STALL
LOCATIONS
MIN.A00.44
417' - 6"8' - 0" MIN.8' - 0" MIN.
NOTES:
1) MAINTAIN 8' - 2" CLEAR FLOOR TO
CEILING HEIGHT WITHIN ALL
GARAGE DRIVE AISLES TO VAN
ACCESSIBLE STALLS
2) SURFACE OF PARKING SPACE(S)
AND ACCESS AISLE(S) NOT TO
EXCEED 1:50 GRADIENT (2%) IN ANY
DIRECTION
3) WIDTH MEASUREMENTS SHALL
BE TAKEN FROM THE CENTERLINE
OF THE STALL MARKINGS PER ANSI
SEC. 502.3
4) VAN PARKING SPACES ARE
PERMITTED TO BE 8'-0" WIDE
MINIMUM WHERE THE ADJACENT
ACCESS AISLE IS 8'-0" MINIMUM PER
ANSI SEC. 502.2
4" TRAFFIC YELLOW
OUTLINE STRIPING
A00.44
8
SIGN AREA = 70 SQ. IN., MIN.
12"18"INTERNATIONAL SYMBOL OF
ACCESSIBILITY, WHITE VINYL
3" HIGH LETTERING MINIMUM,WHITE VINYL, TYP.
1" HIGH LETTERING
"VAN ACCESSIBLE" SIGN ATTACHED
WHERE REQ., RE: PLANS
80" MIN. AFF IF ADJACENT TO ACCESSIBLE
ROUTE, OTHERWISE 60" AFF
PARKING
ONLY
VAN
ACCESSIBLE
BLUE VINYL FACE, ANODIZED
ALUMINUM BACKSIDE
RADIUS CORNERS, TYP.
NOTE: SIGN PROVIDER TO
CONFIRM AND COMPLY
WITH APPLICABLE CODES.3 1/2"1 1/2" DIA. GRAB BAR
AUTOMATIC FLUSH CONTROL (IF
MANUAL, CONTROLS TO BE
BETWEEN 15" AND 36" A.F.F AND
OPERABLE WITH 5 LBS. OF
PRESSURE OR LESS.LOCATE FLUSH CONTROLS ON THE
OPEN SIDE OF WATER CLOSETS
PER ANSI SEC. 604.10.6)
1' - 6"1' - 6"19" MAX.17" MIN.MIN9"TOILET PARTITION
NOTE: DESIGN BASED UPON ADA ACCESSIBILITY GUIDELINES AND 2009 ANSI 117.1 REQUIREMENTS
NOTE: ALL DIMENSIONS ARE TO FACE OF FINISH
HATCHED AREA REPRESENTS
MIN. REINFORCED AREA
1 1/2" DIA. GRAB BAR
TOILET TISSUE DISPENSER
8"19" MAX.17" MIN.19" MIN.33" TO 36"6"1' - 6" MIN.39" TO 41"TYP.8"6"
1' - 0"3' - 6"
6"6"
39" TO 41"
36" MIN.
17" - 19" MIN.60" MIN.1 1/2" DIA. GRAB BAR
NOTE: DESIGN BASED UPON ADA ACCESSIBILITY GUIDELINES AND ANSI A117.1 REQUIREMENTS
NOTE: ALL DIMENSIONS ARE TO FACE OF FINISH42" MIN.5' - 0"5' - 0"INTERNATIONAL
ACCESSIBLE SYMBOL
BACKGROUND BLUE
TRAFFIC PAINT -
1 COAT BLUE COLOR
NO. 15000
FEDERAL STANDARD 5952
YELLOW FIGURE :
2" WIDE STRIPES -
TRAFFIC PAINT
NOTE:
EMBLEM MUST BE LOCATED IN STALL SO THAT IT IS VISIBLE BY A
TRAFFIC ENFORCEMENT OFFICER WHEN A VEHICLE IS PROPERLY
PARKED IN THE SPACE. (CENTERED AT ENTRANCE OF STALL IS
RECOMMENDED)
PROJECT
COPYRIGHT BY JOHNSON
NATHAN STROHE (JNS). ALL
DRAWN AND WRITTEN
INFORMATION APPEARING
HEREIN SHALL NOT BE
MODIFIED, DUPLICATED,
DISCLOSED, USED FORANOTHER PROJECT, OR
OTHERWISE USED WITHOUT
THE WRITTEN CONSENT AND
INDEMNIFICATION OF JNS
SHEET TITLE
ISSUES/REVISIONS
STAMP
SHEET NUMBER
PRINTED ON1600 Wynkoop St., Suite 100 | Denver, CO 80202303.892.7062WWW.JNS.DESIGN9/29/2016 1:49:49 PMP:\1611\05-Design Drawings\08-Local Workstation\Kevin\1611_Black Olive_KEVIN.rvtA00.44BLACK & OLIVE, LLCBLACK OLIVE #1611
ACCESSIBILITY
DETAILS 202 SOUTH BLACK AVENUE, BOZEMAN, MONTANA 59715 1/2" = 1'-0"3 SHOWER BLOCKING
1/4" = 1'-0"5 ACCESSIBLE - TYPICAL PARKING STALL
1/2" = 1'-0"7
ACCESSIBLE PARKING STALL SIGN
ATTACHED TO WALL
1/4" = 1'-0"6
ACCESSIBLE - TYPICAL VAN PARKING
STALL
3" = 1'-0"8 ACCESSIBLE SYMBOL
1/2" = 1'-0"2 AMBULATORY - ELEVATION
1/2" = 1'-0"1 AMBULATORY - PLAN
1/2" = 1'-0"4 ACCESSIBLE - SYMBOL
# Date Description
09/12/2016 100% SCHEMATIC
DESIGN
10/04/2016 SITE PLAN